Chapter 3, Problem 3.35.1C

Please answer fast what are some tips to improve image quality when looking at a organsims using a microscope

Previous question: The field of view is the maximum area visible through the lenses of a microscope, and it is represented by a diameter. To determine the diameter of your field of view, you can place a transparent metric ruler under the low power (10X) objective of a microscope. You would focus the microscope on the scale of the ruler and measure the diameter of the field of vision in millimeters. Refer to the image taken of this preparation below. What is the approximate field of view as seen by this 10X objective. Note: This microscope has a 10X eyepiece, giving a total magnification of 100X. The image shows the 1mm is for this question. - Answer for this question was 3mm.

Describe in depth the steps that HMMs use to process vectors of continuous features.

The field of view (FOV) is the entire circular image we see when looking into the eyepiece. The diameter of the FOV gets smaller as we increase magnification. It can be measured by using a stage micrometer like a ruler, measuring from edge to edge. Notice that the stage micrometer is 1000 microns (µm) in length, and the field of view under the lowest magnification is 5000 µm. Describe how we measure it?

Is it possible to determine Km and Vmax without using excel? Because we are not allowed to use computer during exam, so I dont understand how its done without using excel?

Label the structures on the pictures, only the listed numbers/letters with the word bank.

The field of view is the maximum area visible through the lenses of a microscope, and it is represented by a diameter. To determine the diameter of your field of view, you can place a transparent metric ruler under the low power (10X) objective of a microscope. You would focus the microscope on the scale of the ruler and measure the diameter of the field of vision in millimeters. Refer to the image taken of this preparation below. What is the approximate field of view as seen by this 10X objective. Note: This microscope has a 10X eyepiece, giving a total magnification of 100X. 0000 1mm 2mm 3mm 4mm 1mm

Explanation of any one of the drawings but in a summary form

PART C: CALCULATING THE DIAMETER OF THE FIELD OF VIEW (FOV)_ The field of view (FOV) is the circular area you can see when you look through the microscope. The diameter of the field of view is different depending on which objective lens you are using. For example, you are using the medium-power objective lens, then the area you can see is actually smaller than if you were using the low-power objective lens. Knowing The diameter of the field of view can help you estimate actual size of objects / cells seen through the microscope. When the revolving nose piece is turned to the low power objective lens, a dear plastic ruler can be placed on the microscope stage (see figure 1). Then, the coarse adjustment knob can be used to focus on the millimeter marks of the ruler making sure that one of the milimeter marks is at the left edge of the field of view (see figure 2). NOTE: Slage cip I-1000 Objects in the FOV are usually measured in micrometers (um). To convert, a FOV in mm, times it by 1000…