You have an open tank, and its maximum highest is 15 ft. It needs zero suppression calibration of its DP transmitter to measure the level. The tapping pint of its high-pressure impulse line is 4 in above the DP transmitter. What will be its minimum differential pressure value and its maximum differential pressure value if you know that the liquid density is 1025-

You have an open tank, and its maximum highest is 15 ft. It needs zero suppression calibration of its DP transmitter to measure the level. The tapping pint of its high-pressure impulse line is 4 in above the DP transmitter. What will be its minimum differential pressure value and its maximum differential pressure value if you know that the liquid density is 1025-

Name: 01:You have an open tank, and its maximum highest is 15 ft. It needs
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: 01:You have an open tank, and its maximum highest is 15 ft. It needs zero suppression calibration of its DPtransmitter to measure the level. The tapping pint of its high-pressure impulse line is 4 in above the DPtransmitter. What will be its minimum

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Please help me with this problem clearly. List two sources of error in the water-filled tube and pressure gauge method of measuring head for a hydro system and how to avoid them. Using this method, a series of measurements up a hill to the source of the stream produces the following heights: 1.5m, 0.7m, 1.0m, 1.9m, 1.6m, 0.3m, and 0.8m. What is the total head for this site? If the flow rate was 0.5 m3s-1, calculate the power available in this stream?
A Pitot-static probe was used to measure the velocity distribution in a water tunnel. The two pressure lines from the probe were connected to a U-tube manometer which uses a liquid of specific gravity 1.7. The maximum velocity expected in the water tunnel was 2.3 m/s. Your job was to select an appropriate U-tube from a manufacturer which supplies manometers of different heights. The cost increases significantly with manometer height. Which of these should you purchase?
(a) Outline briefly the operational of the fluid system from the input to the output. (b) Determine the mathematical model of the system. (c) Referring to the results from Q1(b), identify in detail the gauge pressure of the tank system.
The pressure of a car tire depends on the temperature of the air in the tire. While the air temperature is 25 degrees Celsius, the effective pressure is 250 kilo pascals. If the volume of the tire is 0.025 m³, what is the pressure that will occur when the temperature in the tire reaches 50 degrees Celsius?
Please solve! Find the air horsepower of an industrial fan that delivers 55 000 cubic feet of air per minute through a 3 ft. by 4 ft.; pressure is 5 in. of water; air temperature is 700 F and barometric pressure is 29.92 in. of mercury.
To measure the water depth in a large open tank with opaque walls, an open vertical glass tube is attached to the side of the tank. The height of the water column in the tube is then used as a measure of the depth of water in the tank. (a) For a true water depth in the tank of 3ft, make use of the following equation (with 0 = 0-degree) to determine the percent error due to capillarity as the diameter of the glass tube is changed. Assume a water temperature of 80°F. Show your result on a graph of percent error versus tube diameter, D, in the range 0.1 in.
Toplam basınç göstergesi Manometre Vana Venturimetre Debiölçer Hazne Pompa Manometre=Manometer Venturimetre=Venturimeter Debiölser-Flaw meter Vana=Valve Pompa=Pump Hazne=Tank Toplam Basınç Göstergesi =Total Pressure Gauge It is desired to display the flow in the venturimeter, How can you determine this? Explain bY. explaining the method vou bave chosen.
Please include a diagram for better understanding
What is the purpose of calibrating the "spirit bubble" or "spirit level"? O It can measure relative atmospheric pressure O It indicates the measurement uncertainty of the analytical balance O It serves as the reference for specific gravity O It is necessary to maintain an even surface when measuring mass
Engineers are worried about the wind forces on a sculpture in Queen Mary campus. The sculpture has a height Ha = 5 m and a diameter, Da = 2 m, as shown in Figure Q3. The engineers decide to investigate making a smaller scale model testing in a water tunnel. They need to match the Reynolds number and the aspect ratio, AR = H/D. The characteristic length scale in the Reynolds number can be the diameter. Water has a density and viscosity of pw = 1000 kg/m3 and μw = 1 mPa. s, while air has a density and viscosity of pa = 1.2 kg/m3 and μa = 18 x 10-6 Pa. s. The average wind speed by the sculpture is Ua = 6 m/s. 1. The maximum height of the model that the engineers can place in the water tunnel is 1.5 m. Find the diameter of the model needed. 2. Find the average speed of water needed for the experiments to match the average wind speed past the sculpture. 3. It is known that at a wind speed of Ua = 4 m/s, the flow past the sculpture becomes turbulent. To visualise the flow in the experiments,…
Please help!!! (Will provide helpful ratings for correct solution)
5. As part of a pollution study, a model concentration c as a function of position x has been developed, c(x)=A(e-x/2a-e-x/a) where A-10-5 ppm (parts per million) and a=1 m. Plot this concentration from x-0 to .x= 10 m. If a vehicle with a pollution sensor travels through this atmosphere at u-U (U=10 m/s), develop an expression for the measured concentration rate of change of c with time, and plot using given data. (a) At what location will the sensor indicate the most rapid rate of change? (b) What is the value of this rate of change?