3. Steam is the working fluid in an ideal Rankine cycle. The saturated vapor entersthe turbine at 8.0 MPa and saturated liquid exits the condenser at a pressure of0.008 MPa. The net power output of the cycle is 100 MW. Determine for the cycle(a) the thermal efficiency, (b) the mass flow rate of the steam, in kg/h, (c) the rateof heat transfer, into the working fluid as it passes through the boiler, in MW, (d)the rate of heat transfer, from the condensing steam as it passes through thecondenser, in MW, (e) the mass flow rate of the condenser cooling water, in kg/h, if cooling water enters the condenser at 15°C and exits at 35°C.

Answered: Image /qna-images/answer/976b0071-5703-4461-8a32-4b14b9c91521.jpg

working fluid in an ideal Rankine cycle. The sa 8.0 MPa and saturated liquid exits the conden e net power output of the cycle is 100 MW. De I efficiency, (b) the mass flow rate of the steam r, into the working fluid as it passes through t

working fluid in an ideal Rankine cycle. The sa 8.0 MPa and saturated liquid exits the conden e net power output of the cycle is 100 MW. De I efficiency, (b) the mass flow rate of the steam r, into the working fluid as it passes through t

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An ideal Rankine cycle operates between the pressure limits of 15,000 kPa in the boiler and 15 kPa in the condenser. If the turbine inlet temperature is 500 deg C and the cycle produces 2500 kW of net work, determine the mass flow rate of the steam in kg/s. Refer to the tables below. a. 1.993 b. 2.122 c. 1.856 d. 2.016
Sheet 2 1. 1.5-Steam is the working fluid in an ideal Rankine cycle. Saturated vapor enters the turbine at 8 MPa and saturated liquid exits the condenser at a pressure of 0.008 MPa. The net power output of the cycle is 100 MW. Determine: • The thermal efficiency (Ans. 37.1%) • The back work ratio (Ans. 0.84%) • The mass flow rate of the steam in kg/h (Ans. 3.77 x 105 kg/h) • The rate of heat transfer, Qin in MW (Ans. 269.77 MW) • The mass flow rate of condenser cooling water, in kg/h, if the cooling water enters the condenser at 25°C and exits at 35°C. (Ans. 14.27x106 kg/h)
A 286-MW steam power plant operates on the Rankine cycle but with turbine and pump efficiencies of 90%. The steam enters the turbine at 10,000 kPa and 550°C. It discharges to the condenser at 50 kPa. Determine the mass fraction of steam that condenses at the turbine exit in percent.
A steam power plant operates on the simple ideal Rankine cycle. Steam enters the turbine at 4 MPa, 500 degrees celcius and is condensed in the condenser at a temperature of 40 degrees celcius. draw and label the schematic diagram and the pV and TS planes. (a) Show the cycle on a T-s diagram. If the mass flow rate is 10 kg/s, determine (b) the thermal efficiency of the cycle (c) the net power output in MW.
The pressure in the boiler of a steam power plant operating on the ideal Rankine cycle is 1250 psia. The condenser pressue is 2 psia. The mass flow rate of steam through the system is 75 lbm/s and the quality of the steam at the turbine exit is 0.9. Show the cycle on a T-s diagram, and determine (a) the turbine inlet temperature, (b) the rate of heat input in the boiler, and (c) the thermal efficiency of the cycle.
1. Water is used as the working fluid in an ideal Rankine cycle. Saturated liquid enters the pump with a specific volume of 1.2720 X 10°m/Kg and exits (the pump) at 1.7530 X 10° m²/Kg and a temperature of 380°C.The internal energy at the exit of the turbine is 2,500KJ/Kg. Determine: a. The network produced in KJ/Kg b. The heat transfer to the steam in the steam generator in KJ/Kg c. The thermal efficiency d. The heat transfer to cooling water passing through the condenser in KJ/Kg of steam condensed. T Wturb,out Gin 1 4 Jout W. pump,in 2.
Refrigerant-134a enters the condenser of a residential heat pump at 800 kPa and 50°C at a rate of 35 L/min and leaves at 750 kPa subcooled by 3°C. The refrigerant enters the compressor at 200 kPa superheated by 3°C. Neglecting changes in kinetic and potential energy and any stray heat transfer, please answer the following. a. Create a schematic of the cycle, use the same numbers used in your textbook for the inlet and exit states of each device, and include the energy exchanges between the cycle devices and the surroundings. Sketch the cycle processes on a T-s diagram. b. c. Determine the isentropic efficiency of the compressor. d. Compute the rate of heat supplied to the heated room. e. Determine the COP of the heat pump.
PLEASE ANSWER ALL AND SHOW COMPLETE SOLUTION. 1. Steam is the working fluid in an ideal Rankine cycle. The saturated vapor enters the turbine at 8.0 MPa and saturated liquid exits the condenser at a pressure of 0.008 MPa. The net power output of the cycle is 100 MW. Determine for the cycle (a) the thermal efficiency, (b) the mass flow rate of the steam, in kg/h, (c) the rate of heat transfer, into the working fluid as it passes through the boiler, in MW, (d) the rate of heat transfer, from the condensing steam as it passes through the condenser, in MW, (e) the mass flow rate of the condenser cooling water, in kg/ h, if cooling water enters the condenser at 15 DEGREE CELCIUS and exits at 35 DEGREE CELCIUS.
In a steam power plant that operates based on a Rankine cycle, the operating pressures of the steam generator and the condenser are 10,000 and 10 kPa, respectively. If the turbine inlet stream is saturated vapor and the condenser outlet flow is saturated liquid, determine the specific heat transfers in the steam generator and the condenser, the specific work involved in the turbine and the pump, and the thermal efficiency and the BWR of the cycle. Also, if the power plant produces 250 MW power, determine the mass flow rate of the cycle’s working fluid.
1. An ideal Ericsson engine using helium as the working fluid operates between temperature limits of 600 R and 3500 R and pressure limits of 20 and 250 psia. Assuming a mass flow rate of 20 Ibm/min, determine (a) the thermal efficiency of the cycle, (b) the heat transfer rate in the regenerator in Btu/min (c) the power delivered in hp
A simple rankine ideal cycle with water as the working fluid. Twenty kilograms of steam enters the turbine at 7.356 MPa and 500.356 oC and is cooled in the condenser at a pressure of 10.356 KPa by running cooling water from a lake through the tubes of the condenser at rate of 2000 kg. Show the T-s diagram and schematic of simple rankine cycle. For cycle determin (a) the turbine work, (b) the heat added, (c) the temperature rise of the cooling water, (d) the thermal efficiency of the cycle. For engine, determine (e) the heat added, (f) the thermal efficiency of the engine, and (g) Draw the T-s and schematic diagram.
A Rankine cycle with superheat uses water as its working fluid. Superheated steam exits the steam generator at 1,800 psia and 1,100°F and exits the condenser as a saturated liquid at 4 psia. The mass flow rate of the water is 205 lbm/s. (a) Determine the exit state of the water from the turbine, the net power produced, and the thermal efficiency of the cycle if the turbine and pump are isentropic. exit state of the water net power produced thermal efficiency MW (b) Determine the exit state of the water from the turbine, the net power produced, and the thermal efficiency of the cycle if the turbine isentropic efficiency is 76% and the pump isentropic efficiency is 68%. exit state of the water net power produced thermal efficiency MW