Why the Capacitance effect is neglected in Short Transmission Line.

The transmission line has the following dataweight of the conductor = 8.2 kg/m, working tension = 1765 kg, and the conductor sag = 4.2 meter,  then the distance between the towers is ....................

7. Briefly explain the reasons why Gauss elimination would not be a good approach to solve power flow problem.

In a three-phase overhead line, the conductors have an overall diameter of 3.0 cm each and are arranged in delta formation. Assuming a critical disruptive voltage of 250 kV between the lines, an air density factor of 0.90 and mo= 0.95, find the minimum spacing between conductors that is allowable. Assume fair weather conditions.

"Transmission lines theory", explain with it; transmission lines effects and their causes,

"In medium transmission line modeling, which of the parameter is considered to be lumped?" Resistance Inductance Capacitance All options are correct

43

What are the effects of making this design shorter? How does it affect the transmission lines?

A) Two conductors of a single phase line, each of 1 cm diameter, are arranged in a vertical plane with one conductor mounted 1 m above the other. A second identical line is mounted at the same height as the first and spaced horizontally 0-25 m apart from it. The two upper and the two lower conductors are connected in parallel. Determine the loop inductance per km of the resulting double circuit line.

2. 100km, 132kV, 50Hz transmission line has per phase resistance R=0.036(22/km). Each phase (a, b, c) are composed of 4-bundle solid conductors with radius of 2 cm. The conductors of this line are arranged horizontally as shown in the figure. Find; a. b. C. d. GMD, GMRL, GMRC Inductance of the line in mili-H. Capacitance of the line in Micro-F. ABCD parameters of the line. 13 m 13 m b di di d₂ r1=2 cm d₁= 40 cm