When selecting construction equipment used to build a building, the contractor should always do the following, except Consider the costs of the equipment and weigh options between overall costs and efficiency. Consider the size and capacity of the equipment to ensure is appropriate for the job. Consider the weight of the equipment for soils. foundations and underground utilities/infrastructure. None of these, all are contractor considerations in equipment selection. Follow the Architect's directions for construction equipment as specified in CSI Division 11 - Equipment.

When selecting construction equipment used to build a building, the contractor should always do the following, except Consider the costs of the equipment and weigh options between overall costs and efficiency. Consider the size and capacity of the equipment to ensure is appropriate for the job. Consider the weight of the equipment for soils. foundations and underground utilities/infrastructure. None of these, all are contractor considerations in equipment selection. Follow the Architect's directions for construction equipment as specified in CSI Division 11 - Equipment.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Explain the working of impingement scrubbers?
One of the most critical processes in construction is transporting and managing concrete. Explain each way of carrying and managing concrete in detail.
How important is the moisture content in construction material utilization?
The "Quality Woods" factory is dedicated to the manufacture of doors. It is currently developing the "Classic 2050" style and requires you to conduct a process flow study. The information necessary for the construction of the DOP is presented below: The materials for making doors are sent from the raw material warehouse to the production department (1.40 mt, 0.51 min). An operator cuts the vertical posts (7 min), moves to planing (0.5 min; 1 mt); the vertical columns are brushed (8 min), it is moved to glued (1.4 mt, 0.51 min). At the same time as the vertical studs are cut, the horizontal studs are cut (10 min), the horizontal studs are planed (10 min). Once the horizontal columns are ready, they are transferred to gluing with vertical columns (1.2 mt, 0.55 min). Vertical uprights are glued to the horizontal ones using glue (15 min). Let it dry in a separate area (15 min). An operator checks that the uprights are well glued and proceeds to nail (6 min), then is transferred to gluing…
How do the contractors request for the substitutions of the material?
Please describe the requirements for the concrete transportation.
1. In your own words, how will you define Prestressed Concrete Design? 2. Do you think this course is important for you to be a full-fledged Civil Engineer? Why? 3. Which do you prefer, Reinforced Concrete or Prestressed Concrete? Why?
Suppose you are assigned to supervise a construction site. The contractor bought cement and you are asked to advise them on how to store the cement. So as a professional who knows about the properties of cement and their storage cares, what will be your advice to the contractor?
Determine the number of modular bricks necessary for the front wall if the house shown in the figure. Add 4% for waste. Determine the cost to lay the brick. It takes a mason 6 labor hours and a laborer 8.5 labor hours to construct 100 square feet of brick. The average hourly wage for a mason ·30⁰ $42.33 and for a laborer is $21.03. -61-8⁰ ||3¹ Elevation ·16' 24' +4'.
In the event that the contractor refuses to lift the construction materials that failed in the laboratory examination from the work site, the resident engineer in this case must –
Define Ultimate Strength Design Method (APA citation). Discuss how USD helps the computation for a whole building
need a good answer free from plagiarism or else I will report you.Good answer will be liked.Thanks