When filled to capacity, the unpressurized storage tank shown in Figure contains water to a height of h = 30 ft. The outside diameter of the tank is 12 ft and the wall thickness is 0.375 in. Determine the maximum normal stress on the outer surface of the tank at its base. (Weight density of water = 62.4 lb/ft3.)

When filled to capacity, the unpressurized storage tank shown in Figure contains water to a height of h = 30 ft. The outside diameter of the tank is 12 ft and the wall thickness is 0.375 in. Determine the maximum normal stress on the outer surface of the tank at its base. (Weight density of water = 62.4 lb/ft3.)

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Civil
Solve.
When filled to capacity, the unpressurized storage tank contains water to a height of h=41ft. The outside diameter of the tank is 8.9 ft and the wall thickness is 0.502 in. Determine the maximum normal stress and the absolute maximum shear stress on the outer surface of the tank at its base. (Weight density of water = 62.4 lb/ft³.) Answers: Maximum normal stress σ= i Maximum shear stress 7= i psi. psi
Determine the normal stress in a ball, which has an outside diameter of 190 mm and a wall thickness of 3.1 mm, when the ball is inflated to a gage pressure of 77 kPa. Answer: 0 = i MPa
4. Find the stress (in MPa) in the red cylinder below. 5000 kg D₁ = 0.50m D₂ = 0.75m
: A solid rod of length 2 m diameter 20 mm vertically hangs from the ceiling and has a collar firmly attached to it. Above the collar an annular rubber washer of 40 mm thickness having a stiffness k = 5 N/mm is placed. Determine maximum stress in the rod caused by a mass of 5 kg falling through a height of 1.2 m.
A cylindrical steel pressure vessel with a diameter of 1200 mm and a wall thickness of 20 mm is subjected to an internal pressure of 4.5 MPa. Determine the circumferential stress in the tank.
The hoop stress at a point on the surface of a thin cylindrical pressure vessel is computed to be 30.0 MPa. The value of maximum shear stress at this point is 1. 7.5 MPa 2. 15.0 MPa 3. 30.0 MPa 4. 22.5 MPa
A steel rod with a circular cross-section hangs vertically inside a building. The rod has a length of 30 m, a diameter of 6 mm, and a mass of 65.3 N. If the rod has a 900 N mass attached to its free end, determine the maximum normal stress in the rod, taking into consideration the mass of the rod itself. 30 m 6 mm 900 N
7 MPa Question 1 Figure Q.1 shows a timber block subjected to normal horizontal pressure of 3 MPa and normal vertical pressure of 7 MPa. Determine : 60° 3 МРа A (a) Normal stress and shear stress on an element A in the timber block (b) The maximum and minimum (absolute) shear stress in the timber block. 7 MPa
Question-8, A cylindrical pressure vessel is1200 mm in diameter. It is made of rolled mild steel plate. The vessel is subjected to an internal pressure of 2 N/mmt. If the material yields at 200 N/mmt, what should be the minimum safe thickness of the plate, based on Maximum Principal Stress Theory?(FOS-1.5)
For a thin walled cylinder with diameter of 7.50 meters and 25mm thickness, when applied with internal pressure of 0.85MPA, the resulting tangential stress is 127.5MPA, what would be the longitudinal stress relationship? Choose the nearest answer. A 47 MPa В) 85 МPа (c) 510 MPа 255 MPa E) 65 MPa