Situation #2: A 5 m long simply supportedreinforced concrete beam has a width of400 mm and an overall depth of 520 mm.The beam reinforced with 3-28 mmcompression bars on top and 6-28 mmtension bars at the bottom, each located 60mm from extreme concrete fiber. Concretestrength fc' = 23.4MPA, and steel yieldstrength fy = 415 MPa, Determine thefollowing: What is the ultimate moment 2.1* ?capacity of the beam in kN.mإجابتكDetermine the additional 2.2concentrated live load than can beapplied at midspan if the dead loadincluding the weight of the beam is 23* .kN/mإجابتك

Answered: Image /qna-images/answer/026e535f-5f10-4679-8085-124149fbea1b.jpg

What is the ultimate moment 2.1 * ?capacity of the beam in kN.m إجابتك Determine the additional 2.2 concentrated live load than can be applied at midspan if the dead load including the weight of the beam is 23 * .kN/m

What is the ultimate moment 2.1 * ?capacity of the beam in kN.m إجابتك Determine the additional 2.2 concentrated live load than can be applied at midspan if the dead load including the weight of the beam is 23 * .kN/m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: A beam is used to support a concentrated load of 12 kN and a distributed load (w). The beam has the…

A: ∑MB=0 -12 x 3 - RC x 9 = 0 RC = -4 kN ↓ ∑V=0 RA + RC = 6 x 9 - 12 RA = 46 kN ↑ ∑MA=0 -MA + 6 x 9 x…

Q: *4–140. Replace the loading by an equivalent resultant force and specify its location on the beam,…

A: Given - A simply supported beam To find- Equivalent resultant force and its location from point A

Q: I- Shear and Moment Diagram 1. Find the maximum shear and moment values by using the Shear and…

Q: The beam below is subjected to a moving trailer truck load as shown. Determine the maximum reaction…

Q: The steel framework is used to support the reinforced stone concrete slab that is used for an…

A: Slab thickness = 200 mm = 0.2 m Shorter span, a = 2 m Longer span, b = 3.5 m To find: The loading…

Q: 20. A CIS33.9 of A36 channel to serve as a roof edge beam with a simple span of 25 ft. The nominal…

Q: A 6-m simple beam is carrying a uniform load of 25 kN/m over the entire beam with two-point loads 15…

A: The moment-area method is the most suitable method for determining the bending and displacement in…

Q: A timber beam AB of 15 cm wide and 25 cm deep and 3 m long, is supported by a guy wire AC in the…

Q: A beam is loaded and supported as shown in the figure bellow, determine the magnitude of the maximum…

A: in given question V1+V2=55×6+110V1+V2=440 taking moment at B V1×10-220-55×6×9-110×4=0V1=363KN and…

Q: Determine the maximum moment at C, in kN-m. O 67.5 kN.m O 70 KN-m O 75 kN.m O 82.5 kN.m

Q: 3m 3m 1 5m o 3 kN/m The 100 mm thick concrete slab shown weighs 24 kN per cu. meter and is being…

Q: d. What is the location of the absolute maximum shear from the left end of the beam? (in ft) e.…

Q: The length of a beam is 9 meters. From the left end, it carries a triangular load of 300N/m. Also,…

Q: 6/6 Determine the maximum BM occurs for the beam shown below 3 kN/m 2 m 4 m

A: Given a cantilever beam and ask to find maximum bending moment?

Q: BY D Calculate the reactions at the supports in the opposite E beam and draw the shear forces…

A: To find support reaction and to draw SFD

Q: A simple beam with a span length of 6m is subjected by a distributed live load of (9.6+0.8+0.7)kN/m…

A: Given Width of beam = 160 mm Depth of beam= 440 mm Span length = 6 m

Q: Determine the ultimate moment capacity of the reinforced concrete beam if it is reinforced with…

A: Given: b = 400 mm h = 600 mm Tension bars of 6-25mm fc = 20.71 MPa fy = 414 MPa

Q: 2.) Detemine the design positive and negative moments of the beam shown. The dead and live load are…

Q: Q3: Draw the shear force and bending moment diagrams for the beam.

A: Solution Draw the Diagram

Q: The beam is loaded as follows: ● Downward distributed load that varies in intensity from 10 N/m at…

A: Given: Required: Moment at fixed support Vertical reaction at fixed support Load diagram Note: as…

Q: 6.13 The uniformly distributed load of intensity wo acts on the central portion of the simply…

Q: An 8-m span overhanging beam carries 5 KN/m load uniformly distributed over its entire length, and…

Q: maximum shear force and the maximum bending moment.

Q: Estimate the support reactions in the beam shown below. The flexural rigidity, EI of the beam is…

A: fixed end moment: MAB¯=-8×3212=-6 KN-mMBA¯=+8×3212=6 KN-mMBC¯=-8×2212-20×28=-7.666…

Q: A beam PQ is supported at its ends and loaded as shown. Draw the shear force and bending moment…

Q: M1 at point B is 10 kips-ft, P1=12 kips is 9 ft from point A; and w1 = 1.5 kips/ft is distributed…

A: Transformed singular concentrated load from UDL = 1.5 x 22 = 33 kips Magnitude of moment for the…

Q: A reinforced concrete beam (300mm by 500mm) with effective depth of 440mm is 5 meters long and…

Q: Q/ Determine the length b of the triangular load and on the beam such that the equivalent resultant

Q: Determine the maximum bending moment that can occur at a point 8 m from the left support of a simply…

Q: M1 at point B is 10 kips-ft, P1=12 kips is 9 ft from point A; and w1 = 1.5 kips/ft is distributed…

A: Solution: Convert the udl into singular concentrated load: P2=load x length =1.5 ×22P2=33 kN The…

Q: Determine the value of Elv (in Ib ft³ )at midspan for the beam loaded by two concentrated forces if…

Q: What is the Maximum moment in kN-m. Given: w = 38, a = 4, b = 3, ando = 1. w kN/m Stomd am bm RD RA…

A: Taking summation of upward forces equal to downward forces we getRA+RB=38×3=114 kN 1Also…

Q: 4) The beam AB is supported by two concentrated loads against F = 114KN and FB= 241 kN forces,…

Q: 5 m P d A. B 4 m 40 mm 40 mm A rigid beam 5 m long is supported by two columns each 4 m in length.…

A: Column CD is hinged at both the ends Column AB is hinged at A and fixed at B The dimension of the…

Q: What is the Maximum moment in kN-m. Given: w = 45, a = 3, b = 2, and c = 3. %3D w kN/m *cm> Rp am bm…

Q: Using SDM and MDM, determine the reactions on the beams below: 10 kN 5 kN/m Вeат 2: A B 30 kNm 5m,…

Concept explainers

Matrix Algebra for Structural analysis

Structural analysis is a process in which the effects of different loads and internal forces, acting on structures and their elements are determined. This method of analysis is effective in detecting the failure loads of the structural elements and the design can be altered before commencing the construction process, which ensures proper strength and safety of the structures.

Question

Situation #2: A 5 m long simply supported
reinforced concrete beam has a width of
400 mm and an overall depth of 520 mm.
The beam reinforced with 3-28 mm
compression bars on top and 6-28 mm
tension bars at the bottom, each located 60
mm from extreme concrete fiber. Concrete
strength fc' = 23.4MPA, and steel yield
strength fy = 415 MPa, Determine the
following:

What is the ultimate moment 2.1
* ?capacity of the beam in kN.m
إجابتك
Determine the additional 2.2
concentrated live load than can be
applied at midspan if the dead load
including the weight of the beam is 23
* .kN/m
إجابتك

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

M1 at point B is 10 kips-ft, P1=12 kips is 9 ft from point A; and w1 = 1.5kips/ft is distributed along the length of the beam which is 22 ft. If the1.5kips/ft uniformly distributed load will be transformed into a singularconcentrated load, what will be the magnitude of Moment taken at pointA? What is the equivalent singular Resultant force of the loads shown?Determine the location of the resultant R from point A.
Please answer completely. Thank you po! ?
A simply supported beam carries a uniform load w=143 kN/m at its middle third if L=15m determine absolute value of the max bending moment in kN-m 3decimals
9 ft 13 ft 22. Inad nianram Mj at point B is 10 kips-ft, P=12 kips is 9 ft from point A; and WI = 1.5 kips/ft is distributed along the length of the beam which is 22 ft. If the 1.5kips/ft uniformly distributed load will be transformed into a singular concentrated load, what will be the magnitude of Moment taken at point A? What is the equivalent singular Resultant force of the loads shown? Determine the location of the resultant R from point A.
U2
The beam is subjected to a service dead load of 2.5k/ft for the entire length and a service live load of 20 kips at 4 ft from left end. The self weight of the beam b = 12in h=24 in has to be added to the dead load for the calculations. How much is the reaction for the design load at point A and paint B?
QUESTION 2 RA 10 kN ↓ 2m → B 2m C 2.5kN/m figure Q2. 2m. D Rp A simply supported beam is loaded a few loads as shown in figure Q2. a) Calculate the reaction forces RA and RD. b) Sketch the shear force diagram (SFD) and bending moment diagram (BMD) c) Calculate the maximum bending moment and its position.
A reinforced concrete rectangular beam has a width of 315mm and an effective depth of 525mm. The beam is reinforced with six 25mm diameter tension bars. Take fy=400MPa and fc=29.50MPa. What is the maximum moment using the NSCP 2015, kN-m? What is the nominal moment capacity of the beam, kN-m?
these are the follow up questions a) Determine the horizontal reaction at ‘C’ in kN. b) Determine the vertical reaction at ‘C’ in kN.
2 Drow shear Force Diagtam with Calculation. Oiagrana with Calculation. stress for this Beam 2) Draw sMoment Brnding maximum Bending 3) Find Cross- Section. 20 KN. m 10 KN/m 6m 3m 3m Iis mm 15mm 115 mm 5o mm 2) 100 mm
%3D Given: w1 = 50 kN/m, w2 = 30 kN/m, P = 30 kN, a 3 m, b= 3 m, and c 3 m. Determine the maximum %3! moment in kN-m. Neglect the mass of the beam. P kN w1kN/m w2kN/m b m C m a m R2 R1