i . In. 3ºd 1 & 0:19ぐمن ۱Water flows steadily through a splitter as shown in the figure with volumeflow rate of Q= 0.08 m/s and Q = 0.05 m/s. the diameter at section 1 andsection 2 are (D3=D2= 12 cm) and the diameter of section 3 (D3= 10 cm). ifthe pressure readings are (P,= 100 kPa, P2= 90 kPa, P3= 80 kPa), calculatethe force needed to hold the splitter at place. Disregard the weight effects.ابوالفظل5:15p äclul 21.07.01>

Answered: Image /qna-images/answer/23478a40-4f91-42f5-8803-d72fcf0cd85b.jpg

Water flows steadily through a splitter as shown in the figure with volume flow rate of Q,= 0.08 m/s and Q, = 0.05 m/s. the diameter at section 1 and section 2 are (D,=D;= 12 cm) and the diameter of section 3 (D3= 10 cm). i the pressure readings are (P= 100 kPa, P2= 90 kPa, P3= 80 kPa), calculate the force needed to hold the splitter at place. Disregard the weight effects.

Water flows steadily through a splitter as shown in the figure with volume flow rate of Q,= 0.08 m/s and Q, = 0.05 m/s. the diameter at section 1 and section 2 are (D,=D;= 12 cm) and the diameter of section 3 (D3= 10 cm). i the pressure readings are (P= 100 kPa, P2= 90 kPa, P3= 80 kPa), calculate the force needed to hold the splitter at place. Disregard the weight effects.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A pipe of diameter 12 cm, is used to pump the water to the house in the Hamra hill at the height of 60 m than the ground. The discharge at the end of the pipe is 200 lit/s. The pressure gauge is fitted at the entry of the pipe in the ground is 34 N/cm?. Find the following: (i) The velocity head at the entry of pipe (in m) (ii) Pressure head at the inlet (in m) (iii) Total available energy per unit weight of the water at the pipe inlet (unit in m) (Enter only the values by referring to the units given in brackets & DO NOT write the unit & do not send the handwritten answers to my mail id...) velocity head at the entry of the pipe is = (unit in m) pressure head at inlet = (unit in m) Total available energy per unit weight of the water at inlet of the pipe
A pipe of diameter 18 cm, is used to pump the water to the house in the Hamra hill at the height of 50 m than the ground. The discharge at the end of the pipe is 220 lit/s. The pressure gauge is fitted at the entry of the pipe in the ground is 35 N/cm². Find the following: (i) The velocity head at the entry of pipe (in m) (ii) Pressure head at the inlet (in m) (iii) Total available energy per unit weight of the water at the pipe inlet (unit in m) (Enter only the values by referring to the units given in brackets & DO NOT write the unit & do not send the handwritten answers to my mail id....) velocity head at the entry of the pipe is = (unit in m) pressure head at inlet = (unit in m) Total available energy per unit weight of the water at inlet of the pipe (unit in m) ,
Water flows inside a solid cylindrical pipe, which narrows as it goes up to a height h (see diagram below). The lower horizontal section has circular cross-sectional diameter d, whereas the upper horizontal section has diameter d/2. Let us denote A to be a point at the lower horizontal section and B to be a point at the upper horizontal section. The flow speed at A and B is uд and u, respectively. The pressure at A and B is PA and PB, respectively. РА UA Oom Ja d d/21 1 UB h (a) Assuming water to be incompressible, show that the flow speed at B is four times the flow speed at A. (b) Use Bernoulli's equation to find the drop in the water pressure from A to B. Express the result in terms of h, uд, the density of water p, and the acceleration of gravity g. (c) Above certain critical height h, vapour bubbles start to appear at the top horizontal section, which hinders water flow through the pipe. Explain why this happens.
Q2/ A pump delivers water from a tank A (water surface elevation = 110 m) to tank B (water surface elevation = 170 m) as shown in figure below. The suction pipe is 45 m long ( = 0.024) and 35 cm in diameter. The delivery pipe is 950 m long (f = 0.022) and 25 cm in diameter. The head discharge relationship for the pump is given by H, = (90 – 8000 Q*), where H, in m and Q in m³/s. Calculate the discharge in the pipeline and the power delivered by the pump. Delivery pipe. elevation 170 m Suction pipe, elevation- 110 m Good Luck Rasha H. Salman
Q2- Water density =1000 kg/m and viscosity is 0.001 Ns/m², is pumped between two reservoirs at 0.2m/s through a 400 m of 8 cm diameter Cast Iron pipe and several minor losses as shown in the figure. Compute the pump power required in kW. Use the last one digit of your ID number for Z1 level in meter. Screwed Z2= 50 m regular 90° elbow Sharp exit Z;= ID m Sharp entrance Half-open gate valve `bend radius Pump Open globe valve 8 cm diameter
Q2/ A fluid containing (water, oil, sand) flowing through the tube and open to the atmosphere as shown in the figure below.. Note that p°- 1.013*105 Pa Calculate the absolute pressure (Pa). Density: Pwater = 1000 kg/m Pail = 800 kg/m Pand = 200 kg/m P. h3=12 cm hg al2cm oIL Pa h25 cm ng = 6 cm %3D Sand water
Water (at 20C) flows through a pipeline connected in series, as shown in the Figure. The construction material of the pipes is commercial steel. Diameters of the first and second pipe are 1¼ inch nominal (42.4/3.25 mm) and ¾ inch nominal(26.9/2.65 mm), respectively. No elevation difference exits in the system. If the pressures at point A and at point B are 12.63 mWH absolute and 10.33 mWH absolute, respectively, what is the volumetric flow rate in the pipeline? Neglect the contraction losses in the connection of two pipes.Note: Friction factor must be found from MOODY DIAGRAM. For simplification in the reading of Moody diagram, take relative roughness of each pipe as: E/D1=0.001 and E/D2=0.002Figure Q2.1. Schematic illustration of the series-connected pipeline system.Figure Q2.2. Moody diagram
10.0 m 200 m 2. An old western town has a water tower to deliver water to the residents. Pictured above is the water tower. The water tower is closed but there is a section of air that is atmospheric pressure just above the water. The corsss ectional area at point 2 is 4.75 x 10 m. The cross sectional area fot the water tower is very large. What is the speed of the water coming out of the pipe at point 2? (density of water = kg/m³) 3. On a vacation trip up in Oregon my boys decided to build a 10 kg raft that they made out of driftwood. 1000
4: Water flow through a pipe at 5L/s as shown in figure. If gage pressure of 12.5kPa, 11.5kPa and 10.3kPa are measured for P1, P2 and P3 respectively, what are the head losses between 1, 2, and 3? (2) -- 50 mm - 50 mm 10m O Pa d, - 30 mm
Air velocity in a duct is measured as 38.2 m/s by a pitot tube. Density of flowing air 1.3 kg/m3. If the pressure difference recorded by the pitot static tube is 0.1 m of water, calculate the coefficient of velocity of the pitot static tube. A Figure or Free Body Diagram will be much appreciated. Thank you
Water is flowing downward in a pipe in the figure shown at 0.02 cu. m. per sec. having diameters of 8 cm. and 4 cm. respectively. Determine the values of pressures (a) at pt. 2, P2 and (b) at pt. 1, P1 if the pressure at pt. 1 is twice as great as the pressure at pt. 2. H20 8 ст. Ф 1.5 m 2 datum 4 cm. Đ
1. Solve and draw the figures İ. An oil of sp. gr. 0.9 is flowing through a venturimeter having inlet diameter 20 cm and throat diameter 10 cm. The oil-mercury differential manometer shows a reading of 20 cm. Calculate the discharge of oil through the horizontal venturimeter. Take C, = 0.98. ii. A horizontal venturimeter with inlet diameter 30 cm and throat diameter 15 cm is used to measure the flow [Ans. 59.15 litres/s] of oil of sp. gr. 0.8. The discharge of oil through venturimeter is 50 litres/s, find the reading of the oil- mercury differential manometer. Take C = 0.98. iii. A horizontal venturimeter with inlet diameter 20 cm and throat diameter 10 cm is used to measure the flow of water. The pressure at inlet is 14.715 N/cm² and vacuum pressure at the throat is 40 cm of mercury. Find the discharge of water through venturimeter. [Ans. 2.489 cm] [Ans. 162.539 lit./s]