Water at T, = 24°C is heated to T, = 74°C by passing it through an alternating2.array of tubes. The outer diameter of the tube D = 2.5 cm and is maintained at a uniformsurface temperature Ts = 100°C. The transverse and longitudinal pits are:SL=1,5;= 2.DThe row of tubes in the flow direction for heating water is 10, and the free flowspeed of water before entering the tube beam is 0.3 m/s. Determine the heattransfer coefficient.

Answered: Image /qna-images/answer/0be8cb02-2dbc-4dbc-9782-baa3c8cf9115.jpg

Answered: Water at T, = 24°C is heated to T, =…

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter7: Forced Convection Inside Tubes And Ducts

Section: Chapter Questions

Problem 7.12P

See similar textbooks

Similar questions

7.43 Liquid sodium is to be heated from 500 K to 600 K by passing it at a flow rate of 5.0 kg/s through a 5-cmID tube whose surface is maintained at 620 K. What length of tube is required?
6.1 Determine the heat transfer coefficient at the stagnation point and the average value of the heat transfer coefficient for a single 5-cm-OD, 60-cm-long tube in cross-flow. The temperature of the tube surface is , the velocity of the fluid flowing perpendicular to the tube axis is 6 m/s, and the temperature of the fluid is . Consider the following fluids: (a) air, (b) hydrogen, and (c) water.
1. A lead pipe has 2 cm inside diameter, 3 cm outer diameter, length of 130 cm. Liquid water at 4°C flows through the pipe with a bulk velocity of 2.50 km/hr. Air is blown around the outside of the pipe at 20 deg C. The inside wall of the said pipe has a temperature of 8 deg Celsius. Find: a. Overall heat coefficient (U) based on outside surface area b. Prandtl (Pr) and Reynolds (Re) numbers based on classification of flow
You are designing a pin-style heatsink for forced cooling of an IC. A small fan blows RT air into the heatsink at about 2.3 ? ? . The aluminum pins are 2mm in diameter and have a constant surface temperature of 120°?. The heatsink is 100mm x 100mm and the pins have an inline arrangement with a transverse pitch of 4mm and a longitudinal pitch of 6mm. What is the total heat dissipation of this heatsink? The pins are 30mm high. Note RT=25 celsius
consider a flow of water in a cylinder maintained at constant temperature of hundred degree Celsius the diameter of the cylinder is 15 and the length of the tube is 6 metre the inlet and outlet temperature of the water is TI equal to 15 degree Celsius and equal 57 degrees celsius find the average heat transfer Coefficient associated with the flow of water mass flow rate is 2.25 kilogram per second and cp=4.178KJ/aKg.K
(3) Spheres 4rk (T; – To) q= 1/r; - 1/ro The heat flow rate Prove this equation!!
Example: A 1.0 kw heater is Constructed ofaglass plte with an electrically condcting film which produčes' a Constant hent flux . The plate is 60x 60 cm and placed in an air sebeetote stream at 27c ,d atm with Uo=5 m/s. Calculate the average temp. difference along the plate, and the difference at the trailing edge.
Solve for the latent heat of water at Tw = 28C(and. λw = 2435 kJ/kg)
Water is flowing through 40-mm diameter 4-m long tube with a rate of 2kg/s. Tube surface temperature is maintained at 100 oC and the water enters the tube at 27oC. a) What is the outlet temperature of the water? b) What is the corresponding heat transfer rate?
A 10-mm-inner-diameter pipe made of commercial steel is used to heat a liquid in an industrial process. The liquid enters the pipe with Ti=25°C, V=0.8 m/s. A uniform heat flux is maintained by an electric resistance heater wrapped arounf the outer surface of the pipe, so that the fluid exits at 75°C. Assuming fully developed flow and taking the average fluid properties to be ρ=1000 kg/m3, cp=4000 J/kg·K, µ=2x10-3 kg/m·s, k=0.48 W/m·K, and Pr=10, determine: The required surface heat flux , produced by the heater The surface temperature at the exit, Ts The pressure loss through the piper and the minimum power required to overcome the resistance to flow.
Fluid is flowing through a 20 mm inside diameter and 25 mm outside diameter brass tube at no leaking with temperature at 65℃ and length of 10 m. Surface conduction of hot fluid is 5.2W/(m^2℃) and thermal conductivity of brass is 12.84W/(m℃). Brass tube is covered by silica of 6 mm thickness with thermal conductivity of 13.84W/(m℃) . Outside of it, is a fluid with 45℃ with surface conductance of 3.2W/(m^2℃). Find the heat transfer from the hot fluid with temperature of 65℃ to fluid with temperature of 45℃.
An electric heater heats the inner tube walls of a concentric tube annulus at a rate of 2000 W/m. The inner and outer tube diameters are 25 and 50 mm respectively. Water enters the annular region at 25 ⁰C and leaves at 85 ⁰C. The flow rate of water is 0.04 kg/s and the outer tube wall is insulated. Assuming that fully developed conditions exist at the outlet, the inner tube surface temperature at the outlet will be ?

SEE MORE QUESTIONS

Recommended textbooks for you

Principles of Heat Transfer (Activate Learning wi…

Mechanical Engineering

ISBN:

9781305387102

Author:

Kreith, Frank; Manglik, Raj M.

Publisher:

Cengage Learning