Please answer within one hr i will give good rating. Using the permeability coefficients for polypropylene and polystyrene in the table below, choose the correct statements.Permeability coefficient PM [x10-¹3 (cm³ STP) (cm)/(cm²-s-Pa)]0₂N₂CO₂0.22PolymerPolypropylenePolystyrene1.22.00.595.47.9Select one:O a. The greater the molecular weight of a molecule is, the lower it's permeability will beO b. Unlike other polymers, polypropylene and polystyrene allow for better permeability of Oxygen than Nitrogen because of their inherent polymericpropertiesO C.A pressurized polypropylene vessel containing O₂ at a pressure of 150 kPa with an ambient O₂ pressure of 50 kPa would go flat slower than apressurized polystyrene vessel containing N₂ at a pressure of 750 kPa and ambient N₂ pressure of 250 kPaO d. A pressurized polypropylene vessel containing CO₂ at a pressure of 150 kPa with an ambient CO₂ pressure of 50 kPa would go flat slower than apressurized polystyrene vessel containing N₂ at a pressure of 750 kPa and ambient N₂ pressure of 250 kPa

Using the permeability coefficients for polypropylene and polystyrene in the table below, choose the correct statements. Permeability coefficient PM [x10-¹3 (cm³ STP) (cm)/(cm²-s-Pa)] 0₂ N₂ CO₂ Polymer Polypropylene Polystyrene 1.2 2.0 0.22 0.59 5.4 7.9

Using the permeability coefficients for polypropylene and polystyrene in the table below, choose the correct statements. Permeability coefficient PM [x10-¹3 (cm³ STP) (cm)/(cm²-s-Pa)] 0₂ N₂ CO₂ Polymer Polypropylene Polystyrene 1.2 2.0 0.22 0.59 5.4 7.9

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A plant discharges 4,000 gal/min of treated wastewater that contains 0.25 mg/L of PCB, (polychloronated biphenyls) into a river that contains no measurable PCBS upstream of the discharge. If the river flow rate is 1,500 cubic feet per second, after the discharged water has thoroughly mixed with the river water, what is the concentration of PCBS in the river in mg/L?
In an electrochemical cell, a metal anode lost 0.227 g while a total volume of 0.08149 L of hydrogen gas was produced. The temperature was 298 K and the barometric pressure was 745.4 mm Hg. At 298 K, the vapor pressure of water is 23.8 mm Hg. How many moles of hydrogen gas were collected?
O True O False QUESTION 3 Compute the expected properties of modulus of elasticity (Ec) of a composite made from S-glass fibers and a Polyester matrix. The volume fraction of fibers is 30%. (Unit is psi.) Properties of Sample Matrix and Filler Materials Tensile strength Tఅబండి Specific weight bai MPa 10 psi GPa Iblin Matrix materials: Polyester Ероху Aluminum 10 18 45 69 124 310 1170 0.40 0.56 10.0 165 2.76 3.86 69 114 0.047 12.7 0.047 12.7 0.100 0.160 27.1 Titanium Filler materials: 170 43.4 S-glass Carbon-PAN Carbon-PAN (high-strength) Carbon (high-modulus) Aramid 600 470 4140 3240 5650 2200 3450 12.5 33.5 40 100 86.2 231 276 690 131 0.09 0.064 24.4 17.4 17.7 820 325 500 0రవ 0.078 0.052 21.2 19.0 14.1 Click Save and Submit to save and submit. Click Save All Answers to save all answers. earch
17. Determine the bulk modulus of elasticity of a liquid, if the pressure of the liquid is increased from 7 MN/m² to 13 MN/m². The volume of liquid decreases by 0.15%. [Ans. 4 GN/m²]
Using the data in Table 18.1, (a) calculate the resistance of an aluminum wire with 5 mm diameter and 5 m length. (b) What is the current flow if the potential drop across the ends of the wire is 0.04 V? Table 18.1 Room-Temperature Electrical Conductivities for Nine Common Metals and Alloys Electrical Conductivity [(N-m)-'] Metal 6.8 × 107 6.0 × 107 4.3 × 107 3.8 × 107 1.6 × 107 1.0 × 107 0.94 × 107 0.6 × 107 0.2 × 107 Silver Copper Gold Aluminum Brass (70Cu–30ZN) Iron Platinum Plain carbon steel Stainless steel
23. The surface tension of water in contact with air is given as 0.0725 N/m. The pressure outside the droplet of 20. Determine the bulk modulus of elasticity of a fluid which is compressed in a cylinder from a volume a 0.009 m at 70 Ncn pressure to a volume of 0.0085 m' at 270 N/cm pressure. [Ans. 3.6 x 10° N/em1 21. The surface tension of water in contact with air at 20°C is given as 0.0716 N/m. The pressure inside droplet of water is to be 0.0147 N/cm greater than the outside pressure, calculate the diameter of droplet of water. 22. Find the surface tension in a soap bubble of 30 mm diameter when the inside pressure is 1.962 N/m* above [Ans. 1.94 mm) atmosphere. (Ans. 0.00735 Nm] water of diameter 0.02 mm is atmospheric 10.32 . Calculate the pressure within the droplet of cm water. [Ans. 11.77 N/em']
7. Which of the following is false: a. The coefficient of thermal expansion is larger if the bond energy is smaller b. Ceramics are generally ionic bonding c. Van der Waals bonding is generally stronger than covalent bonding d. The free electrons in metallic bonding is reason for electrical conductivity 8. Which of the following is true: a. Polymers are generally denser than ceranmics b. Young's modulus of ceramics are similar to polymers c. Composites have higher tensile strength than metals d. Ceramics have low resistance to fracture than metals
What percentage of microorganisms survive following treatment if the population is reduced by a 7 log reduction? %
Combustion of a fuel sampie in a bomb calorimeter increases the temperature of the entire system by 5.10 °C if the calorimeter contains 1500 g of water, but only by 4.00 "Cif the calorimeter contains 1950g of water. What is the heat capacity of the dry bomb calorimeter assembly? Assume that the specific heat capacity of water is 4.18 J A. 570 J "C- B. 912 J "C-1 C. 722 J "C- D. 366 J "C-1 E. 494 J "C-
The Occupational Safety and Health Administration has established a Permissible Exposure Limit of 200 parts per million (ppm) for toluene. As an industrial hygienist, you are doing personal sampling on a worker who is in charge of a production process that uses toluene. The upcoming exposures can be measured: During one hour, 500 ppm 100 ppm for four hours and 225 ppm for three What is the TWA as calculated? What advice would you provide plant management regarding toluene exposure and PEL adherence?
lodine (12), like other substances, has only 3 phases: solid, liquid and gas. The triple point of iodine is at 90 torr and 115 °C. Which of the following statements is true about liquid of I2? Note that 1 torr = 1 mm Hg. a. l2 (liq) is less dense than l2 (g). b. 12 (liq) cannot exist at 120 °C. Oc l2 (liq) cannot exist at 1 atm. (1 atm = 760 torr) o d.l2 (liq) cannot have a vapor pressure above 90 torr. e. l2 (liq) cannot exist at 10 torr.
The molar mass of oxygen atom (O) is 16g/mol that is the number of Avogadro * for 3mole equal to 2.65x1023 6.022x1023 a 18.066x1023 C