used for canitar land6110/10.. (b) A slaughterhouse generated 1036.8 m³/d of wastewater each day. The average soluble BODs and MLVSS (X) of the treated wastewater after primary settling is 966 mg/L and 2000 mg/L, respectively. The aeration tank has effective dimensions of 8.0m (W) x 8.0m (L) x 5.0m (D). Determine the aeration period and F/M ratio. (a) Dies

used for canitar land6110/10.. (b) A slaughterhouse generated 1036.8 m³/d of wastewater each day. The average soluble BODs and MLVSS (X) of the treated wastewater after primary settling is 966 mg/L and 2000 mg/L, respectively. The aeration tank has effective dimensions of 8.0m (W) x 8.0m (L) x 5.0m (D). Determine the aeration period and F/M ratio. (a) Dies

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Question- A circular primary clarifier processes 5005 cubic meters of municipal wastewater every day. The overflow rate is 35m³/md. The diameter of the clarifier shall be
An industrial wastewater discharged at a flowrate of 1000 m³/d having 220 mg/l initial concentration of total suspended solids (TSS). If this wastewater is to be treated individually by one of the following processes: 1. Primary settling tank which should remove 60% of TSS. 2. Coagulation unit using 40 g ferric chloride (FeCl3) as a coagulant /m²³ of wastewater. The coagulation unit will remove 85% of TSS. Estimate the mass and volume of the sludge generated from each suggested unit. Assume the following sludge specification: Source of sludge Primary settling tank Coagulation tank Specific gravity 1.03 1.05 Moisture content 94% 92%
2. The average wastewater flow from a community of 20,000 is 125 gpcd. The 5 day, 20 deg C BOD is 250 mg/L. The suspended solids content is 300 mg/L. A final plant effluent of 50 mg/L of BOD is to be achieved through the use of two sets of identical settling tanks and trickling filters operating in parallel. The settling tanks are to be designed to a standard of 1000 gpd/^2. The trickling filters are to be 6^ deep and operated at an organic loading of 55 lbm/1000^3 d. There is no recirculalon. (1) What settling tank surface area is required? In ft^2 (2) What settling tank diameter is required? In ft (3) Estimate the BOD removal in the settling tanks? In percent % (4) What is the trickling filter diameter? In ft domeved Ward
The wastewater contains 7.5 x 105 fecal CFU per liter. The permissible fecal coliform concentration is 3500 fecal coliform CFU/L. Calculate the length of pipe required if the linear velocity of the wastewater pipe is 0.75 m/s. Take the reaction rate constant for the destruction of the fecal coliform is 0.24 per min.
Wasterwater Engineering Civil engineering
Question- A circular primary clarifier processes an average flow of 3000 m³/d of municipal wastewater. The overflow rate is 25 m³/d. Find the diameter of clarifier.
A pipe is carrying wastewater with a flow velocity of 0.75 m/s and coliform concentration of 7.5x105/L. The allowable concentration of coliform is given as 3500 CFU/L. Determine the required length of the pipe if the coliform decomposition has a rate constant of 0.24 min1.
Design an oxidation pond for treating domestic sewage contributed by 10,000 persons supplied with water at 200 litres per person per day. The BOD and suspended solids are 300 m g/l each. Permissible organic loading for the pond is not less than 500 kg/ha/day. The detention period is not to exceed 6 days. Assume width to length ratio as 1 : 2, and operational depth as 1.2 m. Assume any other data. Sewage volume may be taken equal to water supplied.
Assume that taal lake is 100m2 and its average height is 5ft. Wastewater thatflows into the lake are the following: a. Food square kitchen waste 5m3/hr; Total Dissolved Solids (TDS) is 50g/L whichoperates 8hrs per dayb. CIH 5m3/hr kitchen waste; TDS is 20mg/L which operates 4hrs per dayc. PCH 20m3/day diluted laboratory waste ; TDS = 40mg/L (1)Determine the volume of wastewater which taal lake can still be contained withoutrainfall.(2)During operational hours a heavy rain fall, the rain gauge reading is 1.5m. Will the taalLake overflow? What is the volume of water that will over flow?(3). Compute the TDS concentration of the overflow.
c) The BOD remaining in a sewage sample after 4 and 8 days was 160 and 60 mg/L respectively at 20°C. Calculate the 5 day BOD of the sewage at 25°C.
As an operator of a wastewater treatment facility, you have learned that your plant runs well at an SRT (based on MLVSS (X) in the aeration basin) of 12 days. If today’s MLVSS (X) concentration is 2,700 mg/L and the RAS (Xr) concentration is 5,500 mg/L, how many L of sludge should you waste from the secondary clarifier today? Other design conditions: Average influent flow = 12,000 m3/d Influent soluble BOD = 150 mg/L Required effluent TSS = 30 mg/L Aeration tank Volume = 1,000 m3
A circular primary clarifier processes 5005 cubic meters of municipal wastewater every day. The overflow rate is 35m³/m²d. The diameter of the clarifier shall be