Two tangents having azimuths of 240 deg. And 282 deg. Are connected by a spiral curve with 191m radius of circular curve. The width of the roadway is 15m. If the design velocity is 75kph, determine the following. а. Determine the length of the spiral curve. b. Determine the length of the external distance. С. What is the rise of the road in circular curve at its outer side with reference to its inner side?

Two tangents having azimuths of 240 deg. And 282 deg. Are connected by a spiral curve with 191m radius of circular curve. The width of the roadway is 15m. If the design velocity is 75kph, determine the following. а. Determine the length of the spiral curve. b. Determine the length of the external distance. С. What is the rise of the road in circular curve at its outer side with reference to its inner side?

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Rush please
Problem 7 A simple curve having a radius of 150 m. connects two tangents that meet with an intersection angle of 55° 30'. The curve is to be shifted by moving the forward tangent 20 m. outward to a position parallel to its original position. Find the radius of the new curve if the P.C. shall be retained. Answer: R₂ = 231.64 m.
FULL SOLUTION PLEASE. DO NOT ROUND OFF PLEASE.The common tangent BC of a reverse curve is 281 m and has an azimuth of 311 degrees . AB is tangent of the first curve whose azimuth is 250 and a distance of 320 m while CD is tangent of the second curve whose azimuth is 211 degrees and a distance of 301 m. If the radius of the second curve is 190 m, determine the following:A. radius of the first curveB. length of the curve from PC to PT
The tangents of a simple curve have bearings of N20°E and N80°E respectively. The radius of curvature is 200.Compute the following:E. Length of the long chordF. Length of the curveG. Degree of the curve
A reverse curve has two simple curves: CURVE A and CURVE B. CURVE A has a radius of 460 meters. CURVE A has a central angle of 82 degrees. The central angle of CURVE B is 80 percent of the central angle of CURVE A. The external distance of CURVE B is equal to the middle ordinate of CURVE A. Find the: - tangent distance of CURVE B - Length of long chord of CURVE B - angle of intersection of the reverse curve - length of the common tangent of the reverse curve
The radius of the first curve passing PC is equal to 255 m, while of the second reversed curve is 425 m long. If the central angle of both curves is 13°, determine the parallel distance between twoangents. « Previous Next
(b) For the safe road design and smooth traffic flow, combination of transition and circular curve will be constructed to combine two tangent line that have bearing of N 70° E (entry tangent) and S 80° E (exit tangent) respectively. With the aid of sketch, design the minimum length of transition curve and circular curve that has the following characteristics • Design speed = 110 km/hr coefficient of side friction, f= 0.15 Superelevation, e = 5 % • Radial acceleration, c = 0.9 m/s³
A. Reversed curve with diverging tangents is to pass through three lines to form a center line of a proposed road. the first line AB has a bearing of N 88° E. and a distance of 125 m., BC has a bearing of N 60° E and a distance of 350 m., while on that of CD has a bearing of S 40° E and a distance of 305 m. If the first tangent has a distance of only % of the common tangent measured from the point of intersection of the first curve determine the radius of the curves and station of PT if PC is 12 + 350
A vertical curve is formed on a two lane undivided highway between the tangents of 1 gradient + 1 Assume the height of driver's eye and height of obstruction and 100 50 as 1.4 m and 0.18 m respectively. Determine the length of vertical curve so formed considering stopping sight distance calculated using the following parameters. Design speed of vehicle = 80 kmph Reaction time = 2.5 sec Down gradient = 2.5% Coefficient of longitudinal friction = 0.38
A simple curve having a radius of 354 m. connects two tangents intersecting at an angle of 45°. It is to be replaced by another curve having 75 m spirals at its end such that the point of tangency shall be the same. Determine the distance that the curve will nearer the vertex.
Two parallel tangents have directions of due east and are 200 m, apart, are connected by a reversed curve having an equal radius of 800 m. The P.C. of the curve is on the upper tangent while the PT. is at the lower tangent. If the horizontal distance parallel to the tangent from the PC to the PT of the reversed curve is 800 m. a. Compute the distance of the intermediate tangent between the curves. b. Compute the distance between the centers of the reversed curve. c. Compute the stationing of PT. if sta: of the P. C. is 10 +020.40.
6) A horizontal curve is to be designed on a 2-lane road on a mountainous terrain. The flowingdata are known: Δ= 40 deg, T = 436.76’, station of PI: 2700+10.65, fs = 0.12, and e = 0.08.Determine the following:a) design speedb) station of the PCc) station of the PTd) deflection angle to the first 100’ statione) chord length to the first 100’ station