two closed 1 m3 chambers are filled with fluid at 25˚C and 1 atm. One is filled with pure carbon dioxide and one is filled with pure water. Only considering the weight of the fluids, which chamber is heavier?

Two liquids of different densities (= 1500 kg/m3 , = 650 kg/m3) are poured together in to a 100 – lit tank, filling it. If the resulting density of the mixture is 800 kg/m3, find the respective amounts of liquid used. Also, find the weight of the mixture; local g = 9.675 m/s2. (3 DECIMAL IN FINAL ANSWER PLS)

2. A 1.2 mm diameter tube is inserted into an unknown liquid whose density is 960 kgm/m3, and Determine it is observed that the liquid rises 5 mm in the tube, making a contact angle of 15°. the surface tension of the liquid. une a IS

If the average temperature of the water was 21.5 ºC, what pressure inside the graduated cylinder is contributed by the water vapor

As temperature increases, the saturation vapor pressure over a water surface increases exponentially increases linearly decreases exponentially decreases linearly

A two-compartment vessel contains fluid in each section. For the first compartment, the fluid density is 1.257.9 kg/m³ and for the second is 627.2 kg/m³. The partition is removed, allowing the fluids to mix. Determine the specific gravity of the mixture if the fluid masses are equal. answers must be in 3 decimals

The liquids are positioned as shown in an open tank with a square bottom figure below. Solve for the following if Patm = 101.325 kPa: FIGURE: Elev. 125 m Oil (s.g. = 0.82) %3D Elev. 102 m Salt Water (s.g. = 1.03) Elev. 89 m Hg (s.g. = 13.60) Elev. 78 m 5m

5. A spherical brass shell has an interior volume of 1.60 x10-3 m³. Within this interior volume is a solid steel ball that has a volume of 5.00 x10-4 m³. The space between the steel ball and the inner surface of the brass shell is filled completely with mercury. A small hole is drilled through the brass, and the temperature of the arrangement is increased by 14 °C. What is the volume of the mercury that spills out of the hole? m3

How can we analyze a spherical pressure vessel?

Figure (a) below shows a U-shaped tube containing an amount of mercury. The left arm of the tube has cross-sectional area A1 of 10.7 cm2, and the right arm has a cross-sectional area A2 of 5.40 cm2. In both arms, the mercury is at the same level, as shown.   In figure (b) below, 100 g of water is poured into the right arm of the tube and sits atop the mercury, all of it within the right arm. The mercury level in the right arm has been displaced downward, and the mercury level in the left arm has been displaced upward from its original level by a distance h. The density of mercury is 13.6 g/cm3, and the density of water is 1.00 g/cm3.   (a) What is the length (in cm) of the column of water in the right arm of the U-shaped tube? ___cm   (b) What distance h (in cm) does the mercury rise in the left arm? ____cm