Two blocks A and B have a weight of 50 N and 30 N, respectively. They are resting on the incline for which the coemicients of static frction are =0.15 and An = 0.25. The spring has a stiffness of k 35 N/m (EQure 1) Part A Determine the inciline angle @ tor which both blocks begin to silde. Express your answer in degrees to three significant figures. ? Submit Reguest Answer Part B Find the required stretch or compression in the connecting spring tor this to occur. Express your answer to three significant figures and include the appropriate units. HẢ Value mm Figure < 1 of 1 Resuest Anawer Submit Provida Fendhack

Two blocks A and B have a weight of 50 N and 30 N, respectively. They are resting on the incline for which the coemicients of static frction are =0.15 and An = 0.25. The spring has a stiffness of k 35 N/m (EQure 1) Part A Determine the inciline angle @ tor which both blocks begin to silde. Express your answer in degrees to three significant figures. ? Submit Reguest Answer Part B Find the required stretch or compression in the connecting spring tor this to occur. Express your answer to three significant figures and include the appropriate units. HẢ Value mm Figure < 1 of 1 Resuest Anawer Submit Provida Fendhack

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A safety valve spring having 9 and /2 coils has the ends squared and ground. The outside diameter of the coil is 115 mm and the wire is 13 mm. It has a free length of 203 mm. The length of which this spring must be initially compressed to hold a boiler pressure of 1.38 MPa on the seat of 32 mm diameter. Modulus of rigidity is taken as G=80GN/m2. a. Find the spring deflection and the operating length b. Calculate the solid length and the deflection of solid length c. Compute the solid force and the Wahl factor
The rigid bar of negligible weight is supported as shown. The middle helical spring is made of 22 mm diameter steel spring and has an outside diameter of 100 mm with 10 turns and the two side springs are made of 32 mm steel spring and has an outside diameter of 250 mm with 8 turns. Before the load P is applied, the side springs are 25 mm longer than the middle spring. If the applied load P = 15 kN and the rigid bar remains horizontal, determine the stress in each spring. Use G = 83 GPa for steel and G = 42 GPa for bronze.
Determine the wahl's factor of a spring designed to fire a 3kg projectile. The outside diameter of the cil is 170 mm with 10mm wire diameter and a total of 20 coils squared and ground. The spring has a free length of 625 mm. When set or loaded the spring is compressed to a length of 444mm.
The 100 kg block is supported by two springs having the stiffness shown. Determine the stretch of spring AC, S(AC): 0.4 m 0.3 m 0.4 m Aac-1.5 kN/m A-12 AN/m Select one: a. S(AC) = 0.1189 m %3D b. none of these C. S(AC) = 0.396 m d. S(AC) = 0.0396 m
A ladder with a uniform cross-section has a length of 4.80-foot long. It weighs W Ib. It is arranged such that one end is on the ground and the other against a vertical wall. The angle of triction at all contact surtaces is 20 degrees. What is the value of the coefficient of triction? What is f, in terms of variable Na? What is the normal force at A in terms of variable W? Answer in three decimal places
AH Determine the resultant force at pins A, B, and C on the three-member frame. 2 m - Ans: 800 N A, = 61.88 N A, = 569.06 N B = 338.12 N -B, = 338.12 N %3D Fc = 572 N F = 572 N Fg=D478 N %3D 200 N/m %3D %3D %3D 2 m C, = 461.88 N ,= -338.12 N %3D 60° B
Solve this problem step by step, with illustrations for easy understanding
19. What is the equilibrium angle if the 1-1bm rod is 24 in long? Assume all surfaces are frictionless and smooth. K 10 in (A) 19.8⁰ (D) 56.4° (B) 33.6° (E) 65.4° (C) 39.8°
Engineering Mechanics (Like/Thumbs-up will be given. Write the solutions&FBD legibly. Round-off to two (2) decimal places.) The uniform slender bar has an ideal roller at its upper end A. Determine the minimum value of the angle θ for which equilibrium is possible for μs = 0.50 in degrees
Q1/A helical compression spring are required to exert a force of 45N when compressed to a length of 70mm. At a length of 58mm the force must be 6ON. The spring is to be installed in a hole with a diameter of 26mm, type the squared and ground ends.
Application of Equilibrium Solve for the value of unknown variables Given P1 = 1.39 KN P2 =6.05KN W1 = 4 KN/m Unknowns a. RAy , RBy , RBx , MB b. value of internal moment 2m to the left of support B
The 20 kg block is supported by two springs having the stiffness shown. Determine the stretch of spring AC, S(AC): 0.4 m - 0.3 m 0.4 m Aac-15 AN/m A12 AN/m Select one: a. none of these O b. S(AC) = 0.175 m C. S(AC) = 0.0792 m %3D O d. S(AC) = 0.35 m %3D