Two bars, A and B, each of length 2.3 m and cross-sectional area 1.7 m2, are placed end to end as shown in the figure.В373 K273 KThe thermal conductivities of the bars arekA = 439 J/(s xm x K) and kg = 887 J/(s x m x K), respectively. The left end of bar A is maintained at 373 K while the right end of B ismaintained at 273 K.What is the rate of heat transfer (in W) through this combination?

Equivalent thermal resistance Req = R1+R2 (series combination) Req = (L/K1A)+(L/K2A) Req =…

Two bars, A and B, each of length 2.3 m and cross-sectional area 1.7 m2, are placed end to end as shown in the figure. A B 373 K 273 K The thermal conductivities of the bars are kA = 439 J/(s xm x K) and kB 887 J/(s x m × K), respectively. The left end of bar A is maintained at 373 K while the right end of B is maintained at 273 K. What is the rate of heat transfer (in W) through this combination?

Two bars, A and B, each of length 2.3 m and cross-sectional area 1.7 m2, are placed end to end as shown in the figure. A B 373 K 273 K The thermal conductivities of the bars are kA = 439 J/(s xm x K) and kB 887 J/(s x m × K), respectively. The left end of bar A is maintained at 373 K while the right end of B is maintained at 273 K. What is the rate of heat transfer (in W) through this combination?

College Physics

10th Edition

ISBN:9781285737027

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter11: Energy In Thermal Processes

Section: Chapter Questions

Problem 54AP: The surface area of an unclothed person is 1.50 m2, and his skin temperature is 33.0C. The person is...

See similar textbooks

Similar questions

The surface area of an unclothed person is 1.50 m2, and his skin temperature is 33.0C. The person is located in a dark room with a temperature of 20.0C, and the emissivity of the skin is e = 0.95. (a) At what rate is energy radiated by the body? (b) What is the significance of the sign of your answer?
A temperature of 162F is equivalent to what temperature in kelvins? (a) 373 K (b) 288 K (c) 345 K (d) 201 K (e) 308 K
Two bars, A and B, each of length 2.3 m and cross-sectional area 1.7 m2, are placed end to end as shown in the figure. A B 373 K 273 K The thermal conductivities of the bars are kA = 439 J/(s x m x K) and kB = 887 J/(s x m × K), respectively. The left end of bar A is maintained at 373K while the right end of B is maintained at 273 K. What is the rate of heat transfer (in W) through this combination? Activate Window Go to Settings to activa
A glass window is 3.7 mm thick, is 2.29 m tall by 1.04 m wide, and has a thermal conductivity of 1.0 W/m K. What is the rate of heat loss (in W) through the window if the inside temperature is 22.3° C and the outside temperature is -20.7 ° C ?
An aluminum bar has a cross-section that is 4.37 cm by 6.87 cm and is 2.3 m long. Aluminum has a thermal conductivity of 205 W/m K. If the aluminum bar is used to bridge between ice at 0 °C and boiling water at 100 °C, what is the rate of heat transfer (in W) along the bar?
A glass window is 1.9 mm thick, is 2.32 m tall by 1.08 m wide, and has a thermal conductivity of 1.0 W/m K. What is the rate of heat loss (in W) through the window if the inside temperature is 23.9 °C and the outside temperature is -26.2 °C?
An electric kitchen range has a total wall area of 1.40 m2 and is insulated with a layer of fiberglass 4.0 cm thick. The inside surface of the fiberglass has a temperature of 175 degrees C and its outside surface is at 35 degrees C. The fiberglass has a thermal conductivity of 0.040 W/(m*K). What is the heat current through the insulation, assuming it may be treated as a flat slab with an area of 1.40 m2? What electric-power input to the heating element is required to maintain this temperature?
A solid concrete wall has dimensions 4.0 m × 2.4 m and is 30 cm thick. The thermal conductivity of the concrete is 1.3 W/m ∙ K, and it separates a basement from the ground outside. The inner surface of the wall is at 18°C, and the outside surface is at 6°C. How much heat flows through the wall every hour?
A Thermopane window of area 5 m² is con- structed of two layers of glass, each 4.4 mm thick separated by an air space of 3 mm. If the inside is at 11°C and the outside is at -24°C, what is the heat loss through the window? The thermal conductivity of glass is 0.8 W/m .° C and of air is 0.0234 W/m .° C. Answer in units of kW.
The figure shows the cross section of a wall made of three layers. The thicknesses of the layers areL1, L2=0.650 L1, andL3=0.250 L1. The thermal conductivities are k1, k2 = 0.800 k1, and k3 = 0.700k1. The temperatures at the left and right sides of the wall are TH=26 "C and Tc=-25 "C, respectively. Thermal conduction is steady. (a) What is the temperature difference AT2 across layer 2 (between the left and right sides of the layer)? If k2 were, instead, equal to 1.200 k1, (b) would the rate at which energy is conducted through the wall be greater than, less than, or the same as previously, and (c) what would be the value of AT? ky k3 k2 Tc TH Li Lg (a) AT2= i (b) (c) AT2= i 26
A 142 cm long aluminum rod (thermal conductivity = 205 W/m-K) has a cross-section area of 3 cm2. If one end is kept in a steam bath and the other end in an ice-water mixture, what is the quantity of heat (in Joules) conducted by the rod in 1 days?
Two bars, A and B, each of length 2.0 m and cross sectional area 1.0 m2, are placed end to end as shown in the figure. The thermal conductivities of the bars are kA = 439 J/(s × m × K) and kB = 887 J/(s × m × K), respectively. The left end of bar A is maintained at 373 K while the right end of B is maintained at 273 K. Which one of the following statements is true concerning the above situation? For a given time t, the amount of heat transferred through bar A is the same as that through B. For a given time t, the amount of heat transferred through bar A is smaller than that through B. For a given time t, the amount of heat transferred through bar A is less than that through B. The time for a quantity of heat Q to pass through bar A is less than that for B. Time is not a factor in determining the quantity of heat conducted through these bars.