To measure the sensitivity, the bubble tube can be attached to the telescope of a theodolite, so that: O A. It can be moved up and down with the telescope O B. It can be tilted up and down with the tube O C.It can be tilted up and down with the telescope O D. It can be clamped up and down with the telescope

To measure the sensitivity, the bubble tube can be attached to the telescope of a theodolite, so that: O A. It can be moved up and down with the telescope O B. It can be tilted up and down with the tube O C.It can be tilted up and down with the telescope O D. It can be clamped up and down with the telescope

Materials Science And Engineering Properties

1st Edition

ISBN:9781111988609

Author:Charles Gilmore

Publisher:Charles Gilmore

Chapter15: Experimental Methods

Section: Chapter Questions

Problem 25CQ

See similar textbooks

Similar questions

The difference between two observed values is called
Vibration tables is used for laboratory utilizations due to its efficient vibrations. Therefore, it is more suitable for in situ conditions. * True False Other:
Polar moment of inertia of a circular area is dª (d) 3 (e) 4
Eliminate the arbirtray constants
A cantilever beam of length L and depth h is subjected to a uniform temperature rise along its length. At any section, however, the temperature increases linearly from t1 on the undersurface of the beam to t2 on its upper surface. If the coefficient of linear expansion of the material of the beam is a, calculate the deflection at its free end. Ans. a(tz-t1)L²12h.
Fill in the blanks 1- The relation of porosity for the following sort is and its value is------------. 2-The helium porosimeter experiment depends on the -conservation. 3.---------'s law is applicable for the expansion of pressure in the helium porosimeter experiment. 4- The type of the porosity in the helium porosimeter experiment is 5-In liquid permeability experiment, if the units of height in the (meter) the pressure unit will be -------------- which should be convert to -- 6-The head of liquid (water) in the liquid permeability experiment is considered -------. 7-The confining pressure for gas permeability experiment is used to prevent the flow from ------------- of core. 8-For gas permeability experiment the slope of the line present permeability while the у-ахis is - and x-axis is ----------- 9- For gas permeability experiment the pressure in the point 2 is pressure. 10- The sources of errors in the experiments are and ---------
Please solve with a good explantion
3.1.2 The block shown is made of a magnesium alloy for which E = 45 GPa and ν = 0.35. Knowing that σx = -180 MPa, determine (a) the magnitude of σy for which the change in the height of the block will be zero, (b) the corresponding change in the area of the face ABCD, (c) the corresponding change in the volume of the block.
Determine the location of the resultant from A of the coplanar parallel system shown in the figure
A capillary tube of diameter 2 mm is placed in a reservoir of water, and a similar capillary tube is placed in a reservoir of methanol. If both tubes are made of clean glass and the water-glass and methanol-glass contact angles are both approximately equal to 0°. Surface tension of water is 0.073 N/m. Surface tension and density of methanol are 0.0225 N/m and 791 kg/m3, respectively. 8.0 Determine the rise of methanol. a.) 7.4 mm b.) 5.8 mm c.) 14.9 mm d.) 2.9 mm e.) 9.0 Determine the rise of water. a.) 7.4 mm b.) 5.8 mm c.) 14.9 mm d.) 2.9 mm e.).
6) Due to a fabrication error the inner circle of the tube is eccentric to the outer circle. By what percentage is the torsional strength reduced when the eccentricity is one fourth of the difference in radii.
3.2 An SDF system is excited by a sinusoidal force. At resonance the amplitude of displacement was measured to be 2 in. At an exciting frequency of one-tenth the natural frequency of the system, the displacement amplitude was measured to be 0.2 in. Estimate the damping ratio of the system. 3.2 = 0.05