This question is similar to the question above but read and calculate carefully. The situation has changed and the numbers have changed. Bonita Cart Bonita is again pulling a cart to the right. The cart used to be tied to a wall but now the rope has broken so the cart rolls over the horizontal floor without friction. Assume that the only forces on the cart are tension forces (including the force from Bonita), normal forces, and gravity with g = 9.81 m/s². Bonita's shoes do not slide over the floor. Bonita has a mass of 52 kg. The cart has a mass of 45 kg. The mass of the rope is small enough to be ignored. Bonita is pulling the cart with a constant force of 283 newtons. Calculate the magnitude of the force that the cart exerts on Bonita. Note that the magnitude of a force is a positive quantity.

This question is similar to the question above but read and calculate carefully. The situation has changed and the numbers have changed. Bonita Cart Bonita is again pulling a cart to the right. The cart used to be tied to a wall but now the rope has broken so the cart rolls over the horizontal floor without friction. Assume that the only forces on the cart are tension forces (including the force from Bonita), normal forces, and gravity with g = 9.81 m/s². Bonita's shoes do not slide over the floor. Bonita has a mass of 52 kg. The cart has a mass of 45 kg. The mass of the rope is small enough to be ignored. Bonita is pulling the cart with a constant force of 283 newtons. Calculate the magnitude of the force that the cart exerts on Bonita. Note that the magnitude of a force is a positive quantity.

College Physics

10th Edition

ISBN:9781285737027

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter7: Rotational Motion And The Law Of Gravity

Section: Chapter Questions

Problem 9WUE: A man whirls a 0.20-kg piece of lead attached to the end of a string of length 0.500 m in a circular...

See similar textbooks

Similar questions

In the Atwood machine shown below, m, = 2.00 kg and m2 = 5.60 kg. The masses of the pulley and string are negligible by comparison. The pulley turns without friction and the string does not stretch. The lighter object is released with a sharp push that sets it into motion at v, = 2.15 m/s downward. How far will m, descend below %3D %3! its initial level? Pulley - String m, m, O A. None О В. 97.6 сm O C. 48.8 cm O D. 24.4 cm 12 2 cm
A fullback is running a sweep around the left side of the line. As he rounds the turn, he is momentarily moving in circular motion, sweeping out a quarter-circle with a radius of 4.17 meters. If the 83.5-kg fullback makes the turn with a speed of 5.21 m/s, then what is his acceleration, the net force, the angle of lean (measured to the vertical), and the total contact force with the ground? PSYW a = ____________ Fnet = ____________ Fgrav = ____________ Fnorm = ____________ Ffrict = ____________ Fcontact = ____________ Angle of Lean = ____________
The maximum static coefficient of friction between the tires of a 2000 kg car and the road is lsmax 0.25. What is the maximum speed with which the car can make a turn of radius 50 m without skidding?
A car goes around a curve on a road that is banked at an angle of21.5°. Even though the road is slick, the car will stay on the roadwithout any friction between its tires and the road when its speedis 19.8 m>s. What is the radius of the curve?
A man stands on the lateral surface of a cylinder, moves his legs, and moves the cylinder with constant speed (see figure). Considering that the coefficient of friction between the shoes and the cylinder is mu = 0.3. What will be the friction force between the cylinder and the man. The mass of man m = 70 Kg.
At a history center, an old canal boat is pulled by two draft horses. It doesn’t take much force to keep the boat moving; the drag force is quite small. But it takes some work to get the 55,000 kg boat up to speed! The horses can pull with a steady force and put a 1400 N tension in the rope that connects to the boat. The rope is straight and level. The boat starts from rest, and the horses pull steadily as they begin their walk down the towpath. How much distance do the horses cover as they bring the boat up to its final speed of 0.70 m/s?
A rubber ball is attached to a 2.56-meter string and spun in a horizontal circle. The tension in the string is 4.53 N. It takes 0.796 s for the ball to complete one revolution. Determine the mass (in kg) of the ball. (Please work in steps on paper .had it worked previously but couldnt understand everything was ran together)
A 69.0 kg tightrope walker stands at the center of a rope. The rope supports are 10 m apart and the rope sags 11.0 ∘ at each end. The tightrope walker crouches down, then leaps straight up with an acceleration of 8.40 m/s2 to catch a passing trapeze. What is the tension in the rope as he jumps? Express your answer with the appropriate units.
A 10 cm fan is rotating at 30 revolutions per minute. Find the centripetal acceleration in cm/s2 for a point on this fan, located 5.0 cm from the center of the fan. A 2500 kg cart rolling on frictionless rails at 9.9 m/s attaches to 1000 kg stationary trailer. What will be the speed of the combined objects after the attachment?
(a) A 22.0-kg child is riding a playground merry-go-round that is rotating at 40.0 rev/mm. What centripetal force is exerted if he is 1.25 m from its center? (b) What centripetal force is exerted if the merry-go-round rotates at 3.00 rev/min and he Is 8.00 m from its center? (c) Compare each force with his weight.
An Atwood machine consists of a pair of masses attached to each other by a cord that passes over a pulley. Assume the pulley and the cord are ideal. If m1= 100 g and m2 = 0.15 kg, then what is the tension in the cord and what is the acceleration of the blocks (include the acceleration's direction)?
A jet dives vertically at a speed v = 174 m/s, before pulling out of the dive along a circular arc. The pilot can survive an acceleration of a = 8.6 g. His mass is m = 91 kg. What is the minimum radius of the circular arc, in meters, that the pilot can make without injury? (Watch you sigfigs) I understand how to calculate this answer, but I need help determining the correct number of sig figs for the answer.