Please make a clear solve PROBLEM # 3:This is the ISO1940 balancing grades. Explain the chart and how can we use it? Where do we use?ACCEPTABLE RESIDUAL UNBALANCE PER UNIT OF ROTOR WEIGHT, LB-IN /LB0010.0010.00010.000010G630-G250G 100G 40100G 1666.3G2.5G1www1,000SPEED, RPM100,000GO410,000ww/ww1,00010,000-100ACCEPTABLE RESIDUAL UNBALANCE PER UNIT OF ROTOR WEIGHT,10F0.1

ISO 1940 are quality characteristics, or the chart given is used to compare rotors of different…

This is the ISO1940 balancing grades. Explain the chart and how can we use it? Where do we use? ACCEPTABLE RESIDUAL UNBALANCE PER UNIT OF ROTOR WEIGHT, LB-IN /LB 0.1 001 0.001 0.0001 0.000010 G630 G250 G 100 G 40 100 G 16 663 G2.5 G1 1,000 SPEED, RPM 100,000 GO4 WIITT 10,000 ACCEPTABLE RESIDUAL UNBALANCE PER UNIT OF ROTOR WEIGHT, gm mm/kg 1,000 10,000 100 ليست؟

This is the ISO1940 balancing grades. Explain the chart and how can we use it? Where do we use? ACCEPTABLE RESIDUAL UNBALANCE PER UNIT OF ROTOR WEIGHT, LB-IN /LB 0.1 001 0.001 0.0001 0.000010 G630 G250 G 100 G 40 100 G 16 663 G2.5 G1 1,000 SPEED, RPM 100,000 GO4 WIITT 10,000 ACCEPTABLE RESIDUAL UNBALANCE PER UNIT OF ROTOR WEIGHT, gm mm/kg 1,000 10,000 100 ليست؟

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

5) Which statement is true about the friction factor in the Moody diagram (shown below). Moody Diagram 0.1 0.09 Transition Region 0.08 0.07 0.05 0.04 0,06 0.03 0.05 0.02 0.04 0.015 0.01 0.03 0.005 0.002 0.001 5x10-4 2x10-49 10-4 5x10-5 10-5 5x10-6 10-6 Friction Factor 12---- Laminar Flow 64 Material Concrete, coarse 0.25 0.025 Concrete, new smooth Drawn tubing 0.0025 Glass, Plastic Perspex 0.0025 Iron, cast 0.15 Sevens, old 3.0 0.1 Steel, mortar lined Steel, rusted 0.5 Stoel, structural or forgod 0.025 Water mains, old Friction Factor=AP. 1.0 Smooth Pipe 3000 10³ 10¹ 105 106 107 108 Reynolds Number, Re - Vd P a) The lines for different relative roughness in the turbulent regime correspond to Darcy-Weisbach model b) The lines for different relative roughness in the turbulent regime correspond to Nikuradse model c) The lines for different relative roughness in the turbulent regime correspond to Hazen-Williams model d) The lines for different relative roughness in the turbulent regime…
A compressor that has been in service for 20 years has finally broken down beyond repair, and now must be replaced. The old 180hp machine cost $1200 and its cost index at that time was 144.5. The new machine will be 400hp. How much will the new machine cost, given that today's compressor index is 252.4 and the power-sizing exponent for compressor sizing is 0.32? A: $929 B: $2706 C: $1434 D: $2096 E: $1549
Note: The given below question is already fully solved just take a one review and make the schematic diagram for this question: A four-stroke SI engine 0.08 m bore (d), 0.10 m stroke (L), is tested at full throttle at constant speed. The fuel supply is fixed at 0.0011333 kg/s and the spark plugs of the four cylinders are successively short circuited without change of speed, brake torque being correspondingly adjusted. The brake power (bp) measurements are the following:With all cylinders firing = 12.5 kWWith cylinder No. 1 cut off = 9 kWWith cylinder No. 2 cut off = 9.15 kWWith cylinder No. 3 cut off = 9.2 kWWith cylinder No. 2 cut off = 9.1 kWThe lower calorific (or heating value, LCVf) of the fuel is 44100 kJ/kg. The clearancevolume (Vcl) of one cylinder 70.0 x 103 mm3. Determine:(a) Indicated power (ip) of the engine under these conditions.(b) The indicated thermal efficiency (c) The relative efficiency of this engine. Given data bore (d) = 0.08 m stroke (L) = 0.10 m fuel…
b) A gasoline engine is specified to be 4-stroke and four-cylinder. It has a bore of 80 mm and a stroke of 100 mm. On test it develops a torque of 75 N.m when running at 3000 rpm. If the clearance volume in each cylinder is 60 cm², the relative efficiency is 0.5 and the calorific value of the fuel is 42 MJ/kg; determine the brake thermal efficiency. Root wicl
1 A gasoline engine working on four stroke develops a brake power of 20.9 kW. A Morse Test was conducted on this engine and the brake power (kW) obtained when each cylinder was made inoperative by short cir- cuiting the spark plug are 14.9, 14.3, 14.8 and 14.5 respectively. The test was conducted at constant speed. Find the indicated power, me- chanical efficiency and bmep when all the cylinders are firing. The bore of the engine is 75 mm and the stroke is 90 mm. The engine is running at 3000 rpm.
Hi there sir/madam I'm not sure how to do this question could please help with this The bore diameter of each cylinder in a six-cylinder four-stroke petrol engine is 25 mm and the stroke length for each cylinder piston is 275 mm. During engine testing, the engine runs at 4250 revolutions per minute (rpm) with a pressure-volume indicator diagram showing a mean net area of 7.85 cm2 and diagram length of 3.25 cm. For a pressure scale set at 525 kN/m2 per cm on the indicator diagram, calculate the indicated power developed by the engine. To 2 d.p
Question 9 of 11 0/5E ew Policies Show Attempt History Current Attempt in Progress Afertilizer producer finds that it can sell its product at a price of p= 3000 - 0.6x dollars per unit when it produces runits of fertilizer. The total production cost (in dollars) for xunits is C(x) 90,000 + 750r + 0.150r. Qu Ma If the production capacity of the firm is at most 1000 units of fertilizer in a specified time, how many units must be manufactured and sold in that time to maximize the profit? Qu Ma Selling units maximizes profit. Grape eTextbook and Media View Mat Hint Ques Attempts: 1 of 3 used Submit Amaer Us le amo ilpactyourscor SOore tion after attet 2 dscodcom ang ow Questi Debere to eand
For a site, if the load is 4,700,000 kWh, how many turbines is required if the specifications of the turbine is as follow: Rotor diameter = 60 m Cut in wind speed = 3 m/s Rated wind speed = 12 m/s Cut out wind speed = 20 m/s The mean wind speed = 6 m/s The standard deviation = 1.3 Also determine: the capacity factor, the availability factor, the load duration and the area required.
I Modified True or False. Analyze the following principles, concepts, or scenarios on vibration. Write the word True if the statement is correct otherwise, identify the word or phrase that made the statement false and replace it with the correct term on the blank provided before each item. Separate it with a comma. 8. The severity of sound is defined by the amplitude level. 9. Through spectral analysis, the signal is analyzed to determine any substantial reciprocal of one cycle motion coming from the machine's components. _10. In viscous damping, an inverse proportional relationship was observed between the velocity of the vibrating body and the damping force. _11. The Newton's second law of motion is applied to the mass or rigid body when dealing with principle of conservation of energy. _12. If no work is done on a conservative system by extermal forces other than gravity or other potential forces, then the total energy of the system varies. 13. In the case wherein the frequency…
A fan running at 2000 rpm delivers 16,000 cfm against 3 in static pressure thereby consuming 15 brakehorsepower. If the rpm increased to 2200 rpm so that the rpm ratio is 1.1:1, what is the new cfm?A. 17500B. 16600C. 17600D. 16500
Find the pressure reading for all Pressure Indicators, P11, P12, P13, and P14? A = 125 cm, B = 2 cm, C = 5 cm, D = 10 cm E = 8 cm, F = 2 cm, G = 5 cm, S.G. = 0.92 Blank #1: PI1 = Blank #2: P12 = Blank #3: PI3 = Blank #4: P14 = LIQUID LEVEL D cmWC cmWC cmWC cmWC TOP13 G P14 O P12 E LLOPII
An engine system of 3 msin components in a series sll having the same reliability. Determine the level of reliability required for each of the components if the engine is to have a reliability of 0.995. Round answer tob4 decimal places e.g. 15.2512