This is part one of a two-part problem. Water at 2.0 kg/s enters the boiler at 40°C and 2000 kPa and exits the boiler at 2000 kPa. If the heat transfer rate into the boiler is 8 000 kW, what is the specific enthalpy (h) at the exit of the boiler? + A) 3831 kJ/kg OB) 4170 kJ/kg OC) 4167 kJ/kg D) none of A), B) or C) Boiler Turbine

This is part one of a two-part problem. Water at 2.0 kg/s enters the boiler at 40°C and 2000 kPa and exits the boiler at 2000 kPa. If the heat transfer rate into the boiler is 8 000 kW, what is the specific enthalpy (h) at the exit of the boiler? + A) 3831 kJ/kg OB) 4170 kJ/kg OC) 4167 kJ/kg D) none of A), B) or C) Boiler Turbine

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

2nd - What is the enthalpy of refrigerant 134a at a temperature of – 8 °C and a pressure of 360 kPa? a) 204.52 kJ/kg B) 59.72 kJ/kg NS) 194.08 kJ/kg D) 41.19 kJ/kg TO) 245.72 kJ/kg
23 - Where atmospheric conditions are 100 kPa and 20 ºC, there is air at a pressure of 103 kPa in a tank. The 6 cm diameter plug in the tank is opened. Determine the maximum airflow through the hole? (R=0.287 J/kgK) a) 0.122 m³/h B) 0.145 m³/h NS) 0.133 m³/h D) 0.197 m³/s TO) 0.098 m³/s
A shell-and-tube heat exchanger uses hot oil at 100-C to heat air. The oil makes six tube passes and the air makes one shell pass. It requires 120 kg/min of air are to be heated from 20 to 80-C. The specific heat of the oil is 2.10 kJ/kg.-C, and its flow rate is 180 kg/min. Calculate the effectiveness in %. A 75 B) 85 C) 95 D) 65
40-Initially, 3.2 kg of water at 300 kPa and 200°C is compressed in an adiabatic closed system. What is the work required for the final internal energy of water to be 3600 kJ/kg? a) 2787.5 kJ B) 3036.8kJ NS) 949.0 kJ D) 296.6 kJ TO) 3292.8 kJ
Water vapor enters a continuous flow adiabatic turbine at a pressure of 25 mPa and a temperature of 700 degrees. It comes out as saturated steam at 50 kPa pressure. Calculate the required mass flow to produce 13 mW of power, ignoring kinetic and potential energy changes.A)8.8 kg/sB)11.5 kg/sC)14.8 kg/sD)3.8 kg/sE)5.5 kg/s
4
7. During the isothermal process at 88 °F, the pressure on 8 lb of air drops from 80 psia to 5 psig. For and internally reversible process, determine, a.) W₁, b.) W₂, c.) Q, d.) AU, e.) AH, and f.) AS
A gas expands in a cylinder from 7.2 bar and 4.68 ft^3 to a final volume of 235 gallons. Determine the work done if the pressure distribution is determined to be a) P=C b)PV=C where V is in m^3 and P in kPa.
A machine does 9-kJ of work in 1 min. What is the power developed by the machine? A) 2000 Watts B 42 Watts C 21 Watts D 150 Watts
1. Determine the work done by 1-kg fluid system as it expands slowly within the piston-cylinder arrangement from an initial pressure and volume of 60 kPaa and 0.028 m3, respectively to a final volume of 0.123 m3 in accordance with the following relations: a) P=Cb) V=C c) pV = C d) pV^2 = C e) pV (InV) = c f) p = -3.9067V
None
A boiler provides 216 GJ of heat per hour to a steam engine providing work in the amount of 32.4 GJ/hr. a) Calculate the efficiency of this engine. b) How much heat is transferred to the cooling waters?