The wastewater from a manufacturing treatment plant is discharged to a municipal 'treatment plant for processing with domestic wastewater. The characteristics of the wastewater from the manufacturing treatment plant are 3500 mg/l BOD, 4500 mg/l SS, 70 mg/l nitrogen and 2 mg/l phosphorous. The characteristics of the domestic wastewater are 350 mg/I BOD, 285 mg/l SS, 50 mg/I N and 11 mg/lP. If the required BOD/N/P weight ratio is 100/5/1, what is the minimum quantity of domestic wastewater required per 1000 gallons of manufacturing wastewater to provide adequate nutrients for biological treatment and the concentration of SS in the combined wastewater?

When selling on the street, dealers may not know the purity of the ketamine they have, and thus users do not know exactly how much ketamine they are receiving. It is unlikely that the ketamine is pure, or even that different batches of ketamine have the same purity. Assume the drug the user typically buys is only 25%25% ketamine, and therefore, the user actually dissolved 0.250 g0.250 g ketamine in 1/41/4 cup of water to make the solution instead of 1 g1 g in the previous question. 1 cup=236.5 mL1 cup=236.5 mL What volume of this ketamine solution would the 71.0 kg71.0 kg user have to inject to experience a high at 0.500 mg/kg

A pipet is used to transfer 5.00 mL of a 1.25 M stock solution in flask "S" to a 25.00-mL volumetric flask "B," which is then diluted with DI H,0 to the calibration mark. The solution is thoroughly mixed. Next, 2.00 mL of the solution in volumetric flask "A" is transferred by pipet to a 50.00-mL volumetric flask "B" and then diluted with DI H,0 to the calibration mark. Calculate the molarity of the solution in vol- umetric flask “B."

The chlorine content of a pool with a capacity of 1.80×104 L was discovered to be 0.00145% by mass, which is well below the sanitary level of 0.00305%. How much chlorine needs to be added in order for the pool to meet the health regulation standard of 0.00305%? First draw a flowchart, then given that the pool consists of fresh water and chlorine, write the total mass (or alternatively chlorine mass) and fresh water balance equations, and then calculate the mass of chlorine in grams that needs to be added to the pool. Assume that the density of the pool water is the same as that of fresh water (1.00 kg/L), the pool is filled to its rated capacity (1.80×104 L), and that the required chlorine can be added to this capacity.