The rigid body shown in the figure consists of three particles connected by massless rods. It is to be rotated about an axis perpendicular to its plane through point P. If M = 0.41 kg, a = 35 cm, and b = 53 cm, how much work is required to take the body from rest to an angular speed of 5.8 rad/s? M 2M 2M

The rigid body shown in the figure consists of three particles connected by massless rods. It is to be rotated about an axis perpendicular to its plane through point P. If M = 0.41 kg, a = 35 cm, and b = 53 cm, how much work is required to take the body from rest to an angular speed of 5.8 rad/s? M 2M 2M

Physics for Scientists and Engineers, Technology Update (No access codes included)

9th Edition

ISBN:9781305116399

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter11: Angular Momentum

Section: Chapter Questions

Problem 11.53AP

See similar textbooks

Similar questions

The mass of a hoop of radius 1.0 m is 6.0 kg. It rolls across a horizontal surface with a speed of 10.0 m/s. (a) How much work is required to stop the hoop? (b) If the hoop starts up a surface at 30 to the horizontal with a speed of 10.0 m/s, how far along the incline will it travel before stopping and rolling back down?
A long, thin rod of mass m = 5.00 kg and length = 1.20 m rotates around an axis perpendicular to the rod with an angularspeed of 3.00 rad/s. a. What is the angular momentum of therod if the axis passes through the rods midpoint? b. What is theangular momentum of the rod if the axis passes through a pointhalfway between its midpoint and its end?
Consider two objects with m1 m2 connected by a light string that passes over a pulley having a moment of inertia of I about its axis of rotation as shown in Figure P10.44. The string does not slip on the pulley or stretch. The pulley turns without friction. The two objects are released from rest separated by a vertical distance 2h. (a) Use the principle of conservation of energy to find the translational speeds of the objects as they pass each other. (b) Find the angular speed of the pulley at this time.
A tennis ball is a hollow sphere with a thin wall. It is set rolling without slipping at 4.03 m/s on a horizontal section of a track as shown in Figure P10.62. It rolls around the inside of a vertical circular loop of radius r = 45.0 cm. As the ball nears the bottom of the loop, the shape of the track deviates from a perfect circle so that the ball leaves the track at a point h = 20.0 cm below the horizontal section. (a) Find the balls speed at the top of the loop. (b) Demonstrate that the ball will not fall from the track at the top of the loop. (c) Find the balls speed as it leaves the track at the bottom. What If? (d) Suppose that static friction between ball and track were negligible so that the ball slid instead of rolling. Would its speed then be higher, lower, or the same at the top of the loop? (e) Explain your answer to part (d). Figure P10.62
A turntable (disk) of radius r = 26.0 cm and rotational inertia0.400 kg m2 rotates with an angular speed of 3.00 rad/s arounda frictionless, vertical axle. A wad of clay of mass m =0.250 kg drops onto and sticks to the edge of the turntable.What is the new angular speed of the turntable?
The rigid body shown is rotated about an axis perpendicular to the paper and through the point P. If M = 0.40 kg, a = 30 cm, and b = 50 cm, how much work is required to take the body from rest to an angular speed of 5.0 rad/s? Neglect the mass of the connecting rods and treat the masses as particles. 3M 3.1 J 02.9 J 02.6J O 1.6 J 3.4 J P M p q# 9 p. 242 chap 7
The rigid body shown in the figure consists of three particles connected by massless rods. It is to be rotated about an axis perpendicular to its plane through point P. If M = 0.28 kg, a = 22 cm, and b = 34 cm, how much work is required to take the body from rest to an angular speed of 5.3 rad/s? Number Units M b b 2M a a P 2M
A square plate has mass 0.600 kg and sides of length 0.150 m. It is free to rotate without friction around an axis through its center and perpendicular to the plane of the plate. How much work must you do on the plate to change its angular speed (a) from 0 to 40.0 rad/s and (b) from 40.0 rad/s to 80.0 rad/s?
We can use rotating cylinder to store energy in space. Let a 10-meter-long cylinder with diameter 1.0 m has mass 60000 kg. Estimate the kinetic energy it can store when it is rotating in an angular speed 50 rad/s?? ???/? .
a 40kg disk with a radius of 30 cm is spinning around a fixed vertical axis with an angular speed of 10 rad/s. How much work must be done on the disk to bring it to an angular speed of 20 rad/s? a)270J 200J 150J 100J e)40J
While spinning down from 500.0 rpm to rest, a solid uniform disk does 51 KJ of work. If the radius of the disk is r=400mm what is it's mass?.
The rigid body shown in the figure consists of three particles connected by massless rods. It is to be rotated about an axis perpendicular to its plane through point P. If M = 0.58 kg, a = 33 cm, and b = 56 cm, how much work is required to take the body from rest to an angular speed of 4.8 rad/s?