The mass of block A is 50kg placed on the block B. Given the mass of block B is 100kg. Block A is tied to the wall with the rope. If the coefficients of friction between block A and block B are u, =0.3 and µ, =0.25 and the coefficients of friction between block B and dry surface are µ, =0.35 and µ̟ =0.3. Determine the minimum of applied load, P if block B is in the verge of impending motion. A=50kg B=100kg

The mass of block A is 50kg placed on the block B. Given the mass of block B is 100kg. Block A is tied to the wall with the rope. If the coefficients of friction between block A and block B are u, =0.3 and µ, =0.25 and the coefficients of friction between block B and dry surface are µ, =0.35 and µ̟ =0.3. Determine the minimum of applied load, P if block B is in the verge of impending motion. A=50kg B=100kg

Name: UTHM EXERCISE 6.2Open with Google Docsversi Tun HseTHMThe mass of blo
Uploaded: 2024-03-20T06:56:46.000Z
Channel: Bartleby
Description: UTHM EXERCISE 6.2Open with Google Docsversi Tun HseTHMThe mass of block A is 50kg placed on the block B. Giventhe mass of block B is 100Okg. Block A is tied to the wallwith the rope. If the coefficients of friction between blockA and block B are u,

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

Two different plates A and B of size A=(60 cm x 60 cm) and B=(60 cm x 30 cm) slide over a plane inclined to the horizontal at an angle of 30°. It is separated from the plane with a film of oil of thickness 1.5 mm. The plates weigh A-30 kg and B-25 kg slide down over an oil (sp.gr = 0.95) used as lubricant of kinematic viscosity 21.5 stoke. What are the sliding velocities of these two plates?
An elastic string of natural length 0.4m and modulus of elasticity 16N is stretched until the tension in it is 9N. Calculate the extension in the string.
A 50 kg block moves on a 35º inclined plane with a friction coefficient of 0.17. The body It is attached to a spring whose elastic constant is 1200. N/m. With the above data, resolve the following: -How much does the spring stretch when it comes to its rest state? Express the result in centimeters.
The rod shown is 215 mm long and 15 mm in diameter. An axial force 214 N is applied to it. Assuming the deformation to be in elastic region, determine the following. (Modulus of elasticity=2.70 GPa, Poisson ratio= 0.4) The elongation in length is mm. Type your choice in the blank: 0.067 0.080 0.096 0.115 0.138 The contraction in diameter is um. Type your choice in the blank: 2.24 2.68 3.23 3.88 4.65 RECOMMENDATION: Spend no more than 10 minutes for this question. F F
Subject :- Physics
Steel ball with radius of 0.13 m lays on a bottom of the lake 6 m deep. What work is needed to lift the ball to the surface of the lake? Density of steel is 7860kg/m3. The volume of a sphere is Use g = 9.8 m/s2 Calculate answer to two decimals.
After an unfortunate accident occurred at a local warehouse, you were contracted to determine the cause. A jib crane collapsed and injured a worker. An image of this type of crane is shown in the figure.The horizontal steel beam had a mass of 88.50 kg per meter of length, and the tension in the cable was T = 12560 N. The crane was rated for a maximum load of P 500 kg. If d = 5.000 m, s = 0.558 m, x = 1.050 m, and h = 1.980 m, what was the magnitude of W1 (the load on the crane) before the collapse? The acceleration due to gravity is g = 9.810 m/s². 444.23 Wi = N Incorrect What was the magnitude of force Fp at the attachment point P? Fp = N
What is the magnitude of the force required to stretch a 15 cm long spring, with a spring constant of 250 N / m, to a length of 25 cm?
7.15 A new sports stadium is being proposed for a city in North Dakota. Some of the project details are as follows. To prepare for the footing and foundation 300 000 cubic yards of dirt will need to be removed. It will have an inflatable roof that covers 10.0 acres and its interior volume will be 60.0 × 106 cubic feet. During construction, 40.0 × 103 cubic yards of concrete, 11.9 × 103 tons of reinforcing steel and 5.00 × 102 tons of structural steel will be utilized. The roof material will include an outer layer of Teflon-coated fiberglass together with an inner layer of woven fiberglass. Given this information, answer the following: (a) If removed evenly over the 10 acres, how deep of a hole would be formed as a result of the excavation? (b) What is the total mass of concrete and steel in lbm? (c) If the two-layer fiberglass roofing material has a mass of 0.6667 lbm/ft², what is the total mass of the roof? (d) If 10.0 in, of wet snow is collected on the roof, what is the added mass…
A scale stretches 7 cm for a 7 kg load. How far apart are the 0.5 kg marks on it to the nearest mm?
An engineer is designing a spring to be placed at the bottom of an elevator shaft. If the elevator cable should break when the elevator is at a height of 103m above the top of the spring, calculate the value that the spring stiffness constant should have so that passengers undergo an acceleration of no more than 3.9g when brought to rest. Let 924kg be the total mass of the elevator and passengers.
Cast Iron O The combined bar as shown in the figure is made up of steel bar with the diameter and length of 60 mm and 3 m respectively and is coated by a 5 mm thick cast iron. When load P is applied, this combined bar is compressed to a total of 2 mm in the length of 3 m. Determine the value of load P, if the moduli of elasticity are 200 GPa for steel and 100 GPa for cast iron. -Steel Bar