The figure shows the cross section of a wall made of three layers. The thicknesses of the layers are L1, L2 -0.700 L1, and L3-0.250 L1. The thermal conductivities are k1, k2 - 0.820 k1, and k3-0.660 k1. The temperatures at the left and right sides of the wall are TH-30 °C and Tc- -20 'C, respectively. Thermal conduction is steady. (a) What is the temperature difference AT2 across layer 2 (between the left and right sides of the layer)? If k2 were, instead, equal to 1.060 k1, (b) would the rate at which energy is conducted through the wall be greater than, less than, or the same as previously, and (c) what would be the value of AT2? k2 k3 TH Tc L1 L9 L3

The figure shows the cross section of a wall made of three layers. The thicknesses of the layers are L1, L2 -0.700 L1, and L3-0.250 L1. The thermal conductivities are k1, k2 - 0.820 k1, and k3-0.660 k1. The temperatures at the left and right sides of the wall are TH-30 °C and Tc- -20 'C, respectively. Thermal conduction is steady. (a) What is the temperature difference AT2 across layer 2 (between the left and right sides of the layer)? If k2 were, instead, equal to 1.060 k1, (b) would the rate at which energy is conducted through the wall be greater than, less than, or the same as previously, and (c) what would be the value of AT2? k2 k3 TH Tc L1 L9 L3

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The figure shows the cross section of a wall made of three layers. The thicknesses of the layers are L₁, L2=0.750 L₁, and L3 = 0.350 L₁. The thermal conductivities are k₁, k₂ = 0.840 k₁, and k3 = 0.780 k₁. The temperatures at the left and right sides of the wall are TH = 23 °C and Tc = -10 °C, respectively. Thermal conduction is steady. (a) What is the temperature difference AT2 across layer 2 (between the left and right sides of the layer)? If k2 were, instead, equal to 1.160 k₁, (b) would the rate at which energy is conducted through the wall be greater than, less than, or the same as previously, and (c) what would be the value of AT2? TH k₁ L₁ kg|kz kq L₂ L3 Tc
A thin bar of length L = 3 meters is situated along the x axis so that one end is at x = 0 and the other end is at x = 3. The thermal diffusivity of the bar is k = 0.4. The bar's initial temperature f(x) = 300 degrees Celsius. The ends of the bar (x = 0 and x = 3) are then put in an icy bath and kept at a constant O degrees C. Let u(x, t) be the temperature in the bar at x at timet, with t measured in seconds. Find u(x, t) and then u7 (2, 0.1). Put uz (2, 0.1) calculated accurately to the nearest thousandth (3 decimal places) in the answer box.
A wall is constructed using bricks made of 3 different materials (A, B, C) as shown in the figure (all dimensions are in cm). The depth of the wall is ( w = 20 ), The pattern repeats itself every 20 cm distance in the vertical direction. Thermal conductivities of the materials are given as kA=0.5W/mK, kB=1 and kC=0.35. Inside and outside temperatures are 20 oC and 45 oC, respectively. Considering only convection inside (h=10 W/m2K) and both convection (h=25 W/m2K) and radiation (h=20 W/m2K) outside: w (m) = ? (a) Draw the thermal resistance network (b) Total thermal resistance (c) Total heat transfer rate from the repeated section (d) Temperature Tx
Determine k, thermal conductivity of a wall if q = 1000 kcal/m2 -hr at thickness, k = 33 mm and ∆t = 30°C.
A thin bar of length L = 3 meters is situated along the x axis so that one end is at x = 0 and the other end is at x = 3. The thermal diffusivity of the bar is k = 0.4. The bar's initial temperature f(x) = 50 degrees Celsius. The ends of the bar (x = 0 and x = 3) are then put in an icy bath and kept at a constant 0 degrees C. Let u(x, t) be the temperature in the bar at x at time t, with t measured in seconds. Find u(x, t) and then u4 (2, 0.1). Put u4(2, 0.1) calculated accurately to the nearest thousandth (3 decimal places) in the answer box.
A square steel bar of side length w = 0.21 m has a thermal conductivity of k = 15.6 J/(s⋅m⋅°C) and is L = 2.7 m long. One end is placed near a blowtorch so that the temperature is T1 = 95° C while the other end rests on a block of ice so that the temperature is a constant T2. a. input an expression for the heat transferred to the cold end of the bar as a function of time using A=w^2 as the cross-sectional area of the bar. b. how much energy in joules was conducted in 1 hour, assuming t2=0*C c. input an expression for the mass of the water melted in one hour using Q1 from above and Lf in the latent heat of fusion. mw=
A team of students tests a material for its thermal conductivity (k). After 20 minutes in a heat box, the temperature is 48° C inside the box and 28° C on top of the material. The following data is true about this test: Area of material = .0225 m2 Thickness of material = .0127 m Light bulb = 25 W What is the thermal conductivity constant for the material? Calculate the amount of energy transferred through the material. Determine the R-value of the material. Based on your calculations, would the material be a reasonable choice for home insulation? Yes of No
Q1/ A thick wall consists two layers of Gypsum, insulation and brick as shown in figure below. The ambient temperature is 20 °C and heat transfer coefficient is 5 Wim2. K in the left side. The surface temperature of right side is 45 °C. find the heat losses per meter length. What will happen if the insulation's thickness * increases by 25% Gypsum k = 0.04W/m. K T= 45 °C h=5 W/m'. K T = 20 °C 5 cm Insulation k=0.04W/m. K Brick k=0.69 W/m. K
Q1/ A thick wall consists two layers of Gypsum, insulation and brick as shown in figure below. The ambient temperature is 20 °C and heat transfer coefficient is 5 W/m2. K in the left side. The surface temperature of right side is 45 °C. find the heat losses per meter length. What will happen if the insulation's thickness * .increases by 25% Gypsum k = 0.04W/m. K T = 45 °C h=5 W/m'. K T. = 20 °C 5 cm Insulation k = 0.04W/m. K Brick k = 0.69 W/m. K
In a grid of wires, the temperature at exterior mesh points is maintained at constant values as shown in the figure. When the grid is in thermal equilibrium, the temperature at each interior mesh point is the average of the temperatures at the four adjacent points. For instance, T2+ T3+0-80 4 T₁ = Find the temperatures T₁, T2, T3, T4, when the grid is in thermal equilibrium. T₁-80 T₂ = 80 T3= 80 T₁ = 0 ₂
Insulating material is used to reduce heat loss from the heating furnace walls to the room. The surface temperature of the insulating material is 100 ° C and the other surfaces 20 ° C. Allowable heat loss up to 140 W / m2 from the wall. If the thermal conductivity of the insulation material is 0.05 W / (m ° C), calculate the required thickness of insulation. insulation thickness = Answer cm
In the diagram below, metal 1 is made of gold and metal 2 is aluminum. Both bars have the same length and area of cross-section but their thermal conductivities are different. The temperature Th is maintained at a constant 88.0°C at the end A while the temperature T, at the end B is maintained at 19.0°C. A. T metal 1 metal 2 T (a) What is the temperature T; at the junction of the two bars? The thermal conductivity of gold is 318 J/(s · m · °C) and that for aluminum is 220 J/(s• m · °C). °C (b) If metals 1 and 2 are now interchanged, but the values of Th and T, are the same as in part (a), what will be the temperature of the junction? °C