The company produced a new productintended to measure diameter profiles. Ina run test conducted, the productproduced the following measurementsfor the diameter of a tire: 30 inches, 30.5inches, and 30.25 inches. This is anexample of what characteristic in termsof measuring? *AccuracyPrecisionSensitivity In a certain manufacturing company, themotorcycles are produced in a singleassembly line with 25 different stations.Upon Quality Assurance inspection ofproduced motorcycles, the productionstopped because it was found out thatstation 22 was not able to put thenecessary part. What type of inspectionis represented by the scenario?Post-ProcessIn-Process

1). Precision- option B is correct Accuracy is how close or far off a given set of measurements are…

The company produced a new product intended to measure diameter profiles. In a run test conducted, the product produced the following measurements for the diameter of a tire: 30 inches, 30.5 inches, and 30.25 inches. This is an example of what characteristic in terms of measuring? * Accuracy Precision Sensitivity

The company produced a new product intended to measure diameter profiles. In a run test conducted, the product produced the following measurements for the diameter of a tire: 30 inches, 30.5 inches, and 30.25 inches. This is an example of what characteristic in terms of measuring? * Accuracy Precision Sensitivity

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

IL IOUJOICIICA RAGICated in the 2-Dirmensional views (Orthographic) is milimeters centimeters There is no way of teling meters 3. When yow stari investigating to salve technological problems the following Technologiool Process yes can be followed to find information: Compare exising products write o design brief perform practical tests both A and C plus collect data. 4.Jocolleci dota the folowing could be used as a resource: Sractical investigation and testing of oproduct A, Band C A speok to or inteniew people firnd infomclion irom any print medio 6. existing products will help technologists in 20
6. A die forge press operates an average of 1000 hr/yr. Under a minimal repair concept, machine failures generated a nonhomogenous Poisson process having the following intensity function with t measured in operating hours: p (t) = 0.0000391t 0.7. When the machine has failed. the repair time is lognormal with tmed -7.0 hours and a shape parameter of 0.8. a) Given the NHPP (Non-Homogeneous Poisson Process) time dependent parameter of this problem, p(t), does the system show reliability growth (decreasing rate of occurrence of failure) or aging (increasing rate of occurrence of failure)? b) Write the expression for and calculate the number of expected failures of the press during a mission time of 5 years, 5,000 hr, m(5,000). c) Write the expression for and calculate the MTTR, meantime to repair. Given s = 0.8, comment on the overall shape or skewness, low skew, high skew, - symmetric, of the Lognormal model. d) Write the expression for and calculate the MTBF, mean time between failures,…
Basic Manufacturing Process with 2 Job Types + Inspection Time between job arrivals at a machining station is exponentially distributed with mean 4.4 minutes. There are 2 types of jobs to be processed 30% of which is Type 1 and, 70% are of Type 2. Processing times are exponentially distributed. Mean processing time for Type 1 is 4.8 minutes, for Type 2 it is 2.5 minutes. After the job is processed, they go through an inspection process with one single inspector and an inspection time with triangular distribution (1,2,3.5). Inspector decides whether the part is good enough, scrap or should be reworked. 80% of the parts produced is good, 10 % is scrap and the rest needs rework. Rework is done by the same manufacturing machine. The priority among the parts will be Part1 first, part2 second and reworks of both type comes later. Rework time is normally distributed with mean 2 minutes and 0,2 std dev. Simulate the system for one 8-hour day.
6. A die forge press operates an average of 1000 hr/yr. Under a minimal repair concept, machine failures generated a nonhomogenous Poisson process having the following intensity function with t measured in operating hours: p (t) = 0.0000391t 07. When the machine has failed, the repair time is lognormal with tmed -7.0 hours and as hape parameter of 0.8. a) Write the expression for and calculate the MTBF, mean time between failures, for the mission time of 5 yr = 5,000 hr. b) Using this information over the 5 yr mission time, write the expression for and calculate the average inherent, steady state, Availability, Ainh of the mission time of 5 yr operating life of the press.
The data provided by a water bottling company for the year 2020 to carry out Break Even Analysis and provide them the results, is as follows. The fixed cost of the year is 9000.0 R.O The estimated sales are 2200000 units The cost of water treatment / unit 12 baize The cost of bottling / unit 08 baize The cost of labelling / unit 08 baize The cost packing / unit 10 baize The cost of labour and maintenance / unit 20 baize The cost of 1 liter bottle (plastic bottle) 12 baize Each unit is sold at price 95 baize Construct the B.E.P chart on a graph sheet and indicate M.o.S, B.E.P and also indicate the new B.E.P, & M.o.S after the improvement measures has been taken and show all mathematical calculations. 1. Determine the B.E.P 2. Determine the profit 3. Margin of safety. 4. Write your decisions to improve the profits of the company and to reduce the B.E.P
There are many types of FMEA related to systems, process, design, top-down, Bottom-up. The two main types are Design FMEA and Bottom-up FMEA. True False
I tried 33.7oC and also 50.517oC but it still says it is incorrect (view attached screenshot). I appreciate your efforts, but unfortunately it says it is still wrong. Any more ideas of what the correct answer might be? I really want to understand how to solve this problem correctly. Thank you!
A company uses exponential smoothing with trend toforecast monthly sales of its product, which show a trend pattern.At the end of week 5, the company wants to forecast sales for week6. Th e trend through week 4 has been 20 additional cases sold perweek. Average sales have been 85 cases per week. The demand forweek 5 was 90 cases. Th e company uses α = 0.20 and β = 0.10.Make a forecast including trend for week 6
Three machines are used in a group-technology cell to process a family of five parts. Thetable below lists production quantities (Qj), production times (Tpij), and machine fractionsfor each family member (fij). Part E requires a changeover time of 5 min on each machine soit is produced in batches of 5 parts. Nonoperation times (Tno) are the same for all parts andmachines: 25 min per machine. Determine (a) average hourly production rate for the cell,(b) utilization of each machine and average utilization of the cell, (c) manufacturing leadtime, and (d) work-in-process. A spreadsheet calculator is recommended for this problem
zain 10 2G 3G zain IQ Z Questions of Lectu... -> Questions of Lecture Five: Q1)) Define the following: 1) The stress & the strain 2) Mechanical stress and mechanical strain 3) yield strength and tensile strength 4) Modulus ofelasticity and the strain hardening Q2)) Fill the following blanks: 1)) Tensile tests are used to 3)) The most application tests of applied static stresses to which materials can be subjected are ---------, ---------, --------- 4)) Tensile stresses cause ---------, and compressive stresses ----------, while shear stresses ----------, of the material. 5)) Engineering stress-strain is important in ----------, while the true stress-strain is important in ---------- 6)) The unit of mechanical stress is --------- or ----------, while the unit of strain is n compression test, when specimen is compressed, its height is ---------, and its cross-sectional area is 8)) Compression is in contrast to the tensile, the compression test contributes to the ----------, in stress…
True, False or Uncertain. Explain your answer. Own wage elasticity JELLlincrease if product demand elasticity n? is high. In short run, when there is an increase in wage rate, each firm will hire less labor and so the industry labor demand is simply the horizontal summation of firm's labor demand. а. b. Labor demand is represented by the marginal revenue produce schedule (MRP) when we have competitive product market while it will be represented by the value of marginal product schedule (VMP) when we have a product market monopolist. When elasticity of substitution, SLK, increase that means the L and K are less substitutable, and the isoquant will be L-shaped. Minimum wage imposed by the government is always bad for the economy because it increase unemployment and deadweight loss. с. d. e. 3.
A dealer of white goods buys washing machines from Arçelik. In their next order, they plan to buy two models for which the related data are as follows: Washing machine model 2. Annual demand (units) 6800 8500 Ordering cost (TL) 125 125 Unit purchasing cost (TL) 2400 1900 Transportation cost per unit (TL.) 250 220 The dealer has allocated a budget of 23,000 TL for the transportation of the machines from the factory. Assume that the anmual invontory carrying cost rate is 30 percent. Calculate the unconstrained order quantities. Are these values optimal? If not, determine the optimal quantities to be stored from each model (Hint: is 0.337)