Question
Expert Solution
This question has been solved!
Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.
This is a popular solution
Trending nowThis is a popular solution!
Step by stepSolved in 3 steps
Knowledge Booster
Similar questions
- = A steel rod with a length of I 1.55 m and a cross section of A = 3.04 cm² is held fixed at the end points of the rod. What is the size of the force developing inside the steel rod when its temperature is raised by AT = 25.0 K? The coefficient of linear expansion for steel is a = 1.17x10-5 1/K, and the Young modulus of steel is E = 200.0 GPa. Submit Answer Tries 0/12arrow_forwardS. At a temperature of 22.20°C the hole in a steel plate has a diameter of 1.030 cm. If a steel rod with a diameter of 1.038 cm has to just slip through this hole, to what temperature should the plate be heated? The coefficient of area expansion of steel is 24 X 10 -6/ °C. Ans: 672arrow_forward63.0 L of oxygen at 21.0°C and an absolute pressure of 2.55atm are compressed to 38.3L and at the same time, the temperature is raised to 53.0°C. What will the new pressure be? P= atmarrow_forward
- An aluminum wire is wrapped in rubber insulation. Both are subject to thermal expansion, with the following coefficients of linear expansion: alphaa=24· 10−6 1/C and alphar=8· 10−5 1/C . If the wire and insulation are the same length of 1.85m at a temperature of20.00°C, what is the difference in length (in MILLIMETERS) between the copper wire and the rubber insulation when heated up to a temperature of 189.00°C? Express a magnitude only (no negatives!). ______mm (MILLIMETERS!)arrow_forwardAn iron rod with an initial length of 11.1 m has its temperature raised from 16o C to 30.35o C. If iron has a coefficient of thermal expansion of 12x10-6 1/oC, what is the change in length of the rod in mm?arrow_forwardLiquid nitrogen has a boiling point of−190.52◦C at atmospheric pressure.Express this temperature in degreesFahrenheit.Answer in units of ◦F Express this temperature in Kelvin.Answer in units of K.arrow_forward
- A hot air balloon uses the principle of buoyancy to create lift. By making the air inside the balloon less dense then the surrounding air, the balloon is able to lift objects many times its own weight. A large hot air balloon has a maximum balloon volume of 2090 m3. a. If the air temperature in the balloon is 54 °C, how much additional mass, in kilograms, can the balloon lift? Assume the molar mass of air is 28.97 g/mol, the air density is 1.20 kg/m3, and the air pressure is 1 atm.arrow_forwardThe density of lead is 1.13 x 10“ kg/m³ at 20.0°C. Find its density (in kg/m) at 131°C. (Use a = 29 x 10-° (°C)-- for the coefficient of linear expansion. Give your answer to at least four significant figures.) HINT 3 × kg/m³ 11216.1arrow_forwardA steel beam 12 m sits next to a concrete wall when the temp is 20 degree A gap must be left between the beam and the concrete wall for expansion purposes. If the temp rises to 45 degrees C how large must the gap be if the steel beam just touches the concrete wall? Coefficient of linear expansion of steel 12X10-6 C-1. I thought it was 1.20X10-3 but I was wronge a. 3.60X10-3 b. 1.20X10-3 c. 2.40X10-3 d. 5.10X10-3arrow_forward
arrow_back_ios
arrow_forward_ios