The Beatles were on their way up in an elevator for their meet-and-greet meeting; John has a mass of 139 pounds, while Paul, George, and Ringo have a mass of 150 pounds. (a) Beginning on the ground floor, the elevator accelerates upward for approximately 2.7 seconds at a pace of 1.55 m/s2. Determine the tension in the elevator's support cable.(b) For almost 3.2 seconds, the elevator continues to go higher at a uniform velocity. What is the tension in the wire at this point? (c) For 2.33 seconds, the elevator begins to decelerate at a rate of 0.850 m/s2. What is the cable tension during deceleration? (d) If the Beatles

The Beatles were on their way up in an elevator for their meet-and-greet meeting; John has a mass of 139 pounds, while Paul, George, and Ringo have a mass of 150 pounds. (a) Beginning on the ground floor, the elevator accelerates upward for approximately 2.7 seconds at a pace of 1.55 m/s2. Determine the tension in the elevator's support cable.(b) For almost 3.2 seconds, the elevator continues to go higher at a uniform velocity. What is the tension in the wire at this point? (c) For 2.33 seconds, the elevator begins to decelerate at a rate of 0.850 m/s2. What is the cable tension during deceleration? (d) If the Beatles

Name: The Beatles were on their way up in an elevator for theirmeet-and-gre
Uploaded: 2024-03-20T06:57:57.000Z
Channel: Bartleby
Description: The Beatles were on their way up in an elevator for theirmeet-and-greet meeting; John has a mass of 139 pounds,while Paul, George, and Ringo have a mass of 150pounds. (a) Beginning on the ground floor, the elevatoraccelerates upward for approximatel

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

A block with mass mb=7.75 kg is suspended on a string. You pull upwards on the string creating a tension force of magnitude TYb=79.2275 N. If the upward speed of the block is 2.25 m/s right now, then what is its speed 5.5 s later?
Consider a person standing on a scale in an elevator. If the elevator accelerates upwards with an acceleration of 1.27 m/s2 and the person has a mass of 79.2 kg, what would the scale read? HINT: you need to take into account the acceleration due to gravity, as well as that of the elevator.
Your answer is partially correct. A 60 kg crate is dragged across a floor by pulling on a rope attached to the crate and inclined 12° above the horizontal. (a) If the coefficient of static friction is 0.46, what minimum force magnitude is required from the rope to start the crate moving? (b) If Hk = 0.30, what is the magnitude of the initial acceleration (m/s^2) of the crate? %3D (a) Number i 276.52 Units (b) Number i 1.568 Units m/s^2
You walk into an elevator, step onto a scale, and push the “up” button. You recall that your normal weight is 625 N. Draw a free-body diagram. (a) When the elevator has an upward acceleration of magnitude 2.50 m/s2, what does the scale read? (b) If you hold a 3.85 kg package by a light vertical string, what will be the tension in this string when the elevator accelerates as in part (a)?
An elevator cab that weighs 20.8 kN moves upward. What is the tension in the cable if the cab's speed is (a) increasing at a rate of 1.10 m/s2 and (b) decreasing at a rate of 1.10 m/s2?
Two buckets of sand hang from opposite ends of a rope that passes over an ideal pulley. Onebucket is full and weighs 120 N; the other bucket is only partlyfilled and weighs 63 N. (a) Initially, you hold onto the lighterbucket to keep it from moving. What is the tension in the rope?(b) You release the lighter bucket and the heavier one descends.What is the tension in the rope now? (c) Eventually the heavierbucket lands and the two buckets come to rest. What is the tension in the rope now? Show your work and explain
You are designing a high-speed elevator for a new skyscraper. The elevator will have a mass limit of 2400 kg (including passengers). For passenger comfort, you choose the maximum ascent speed to be 18.0 m/s, the maximum descent speed to be 10.0 m/s, and the maximum acceleration magnitude to be 3.30 m/s2. Ignore friction. (a)What is the maximum upward force that the supporting cables exert on the elevator car? ___kN (b)What is the minimum upward force that the supporting cables exert on the elevator car? ____kN
An elevator cab that weighs 23.6 kN moves upward. What is the tension in the cable if the cab's speed is (a) increasing at a rate of 1.06 m/s? and (b) decreasing at a rate of 1.06 m/s?? (a) Number i Units (b) Number i Units > >
A 74.1-kg crate is suspended between the floor and the ceiling using two spring scales, one attached to the ceiling and one to the floor. If the lower scale reads 120 N, what is the reading of the upper scale? Ignore the weights of the scales.
An elevator filled with passengers has a mass of 1.70 × 103 kg . (a) The elevator accelerates upward from rest at a rate of 1.20 m/s2 for 1.50 s. Calculate the tension in the cable supporting the elevator. (b) The elevator continues upward at constant velocity for 8.50 s. What is the tension in the cable during this time? (c) The elevator decelerates at a rate of 0.600 m/s2 for 3.00 s. What is the tension in the cable during deceleration? (d) How high has the elevator moved above its original starting point, and what is its final velocity?
A crane is pulling a load (weight = 818 N) vertically upward. (a) What is the tension in the cable if the load initially accelerates upwards at 1.08 m/s2?(b) What is the tension during the remainder of the lift when the load moves at constant velocity?
please put the exact number