Show complete solution and clear explanation thank you A flexible pavement having a thickness of 46mm carries a static wheel load of W. The circular contact has an equivalent radius of 150mm. If the load W is assumed to be transmitted across a wide are of subgrade at an angle of 45 degrees compute the value of the wheel load W if the bearing stress of the base is 0.42 MPa

Show complete solution and clear explanation thank you A flexible pavement having a thickness of 46mm carries a static wheel load of W. The circular contact has an equivalent radius of 150mm. If the load W is assumed to be transmitted across a wide are of subgrade at an angle of 45 degrees compute the value of the wheel load W if the bearing stress of the base is 0.42 MPa

Traffic and Highway Engineering

5th Edition

ISBN:9781305156241

Author:Garber, Nicholas J.

Publisher:Garber, Nicholas J.

Chapter20: Design Of Rigid Pavements

Section: Chapter Questions

Problem 12P

See similar textbooks

Similar questions

calculate the maximum stress at corner of 4600 kg wheel load is applied on cement concrete pavement of thickness is 180mm?
Find the safe static wheel load that a 360 mm thick rigid pavement could carry without any dowel across the joints if the allowable tensile stress of concrete is 1.5 MPa.
A concrete pavement is constructed at a temperature of 10°C. The peak summer temperature is 30°C. The coefficient of temperature is 10 x 10^- 6/°C. The gap at the expansion joint is 2.5 cm. The spacing of expansion joint is what.
Calculate the maximum stress at corner if 4600 kg wheel load is applied on cementconcrete pavement of thickness 180 mm. a) 40 kg/cm² b) 42.59 kg/cm² c) 43.54 kg/cm² d) 44.89 kg/cm²
show that the design thickness of a concrete Pavement slab is safe for Combined load and temperature stresses for longitudinal and conditions, given fellowling data: Design thickness = 20 Con Maximum wheel load = 4080 kg ● Impact factor - 10% . . modules of elesticity of concrete = 3x 100 kg/cm² modulus of Subgrade reaction = 6kg/cm³. Paisson's ration of Concreate = 0.2 ● • Type Slab pressure = 7 Kg/cm2 dimensions = 4.5m x 3.8m • Thermal conefficient of concrete = 8x10° per °C • Temperatore difference during the day = 0+5°C/cm Allowable flexural Strength of concrete=3skg/ ● Com 2
A pavement element along Thika road of 100x150x200 mm was subjected to an equalall round pressure of 120kn/m2 and axial load of 2.5KN in the X-direction. The changesin length are 0.92mm in X-direction, 0.27mm in the Y-direction and 0.18mm in the Z direction. Calculate thei. Elastic theory ratio, Eii. Poisson’s ratio,iii. Bulk Modulus, K
A flexible pavement having a thickness of 46 mm carries a static wheel load of "W". The circular contact are of time has an equivalent radius of 150 mm. If the load "W" is assumed to be transmitted across a wide area of subgrade at an angle of 45°, compute the value of wheel load "W" if the bearing stress of the base is 0.42 MPa.
Question 1 a- Design the dowel bars for an expansion joint (Z = 0.5 in), the critical dowel will carry a load of 1700 Ib. What is the diameter (b') for the dowel bar, which will provide safe concrete the bearing stress? b- A9 in thick rigid pavement, having slabs 15 ft wide and 60 ft long subjected to a single tire load of 10 kips, 100psi. If (k = 110 pci, E = 4 * 106 psi, u= 0.15, et = 5 x 10-6 in/in/"F). The temperature difference between top and bottom were found to be 50° F (noon). 1. Calculate edge stress due to load? 2. Calculate edge stress due to Temperature?
A 12 mm bars is used as the longitudinal bars of a concrete pavement and it is spaced at 600 mm on centers. The width of roadway is 9 meters and the coefficient of friction of the slab on the subgrade is 2.0. Thickness of slab is 150 mm. If the allowable bond stress is 0.83 MPa, determine the length of longitudinal bars.
Show complete solution with clear explanation thanks A rigid pavement is to be used to carry a wheel load of 49KN, the allowable tensile stress of the concrete is 1.4MPa. Sufficient dowels are used across the joints. Design the center of the thickness of the pavement at the center and base
5. A rigid pavement is to be used to carry a wheel load of 54.04 kN. Enough dowels will be used across the joint. What will be the difference in thickness (in mm) between the edge and the center of the pavement? The allowable tensile strength of concrete is 1.42 MPa. Round off to the nearest whole number.
A 16mm dia. bar is used as longitudinal bars of a concrete pavement. It is spaced at 700 mm on center. The road of the roadway 9.20 meter and thickness of slab is 180mm. with the allowable bond stress of bar is 850 Kpa. Illustrate & determine the coefficient of friction of the slab on the subgrade if design length of the longitudinal bars 1.15 m. Assumed a 2400 kg. per cubic m of concrete.