self-synchronizing high

Two resistors: Brown Black Red and Yellow Violet Red are configured as shown above. What would be the measured resistance between the top and bottom connections? ohms Put in numbers and engineering prefixes only. Round to 1 decimal p (x.x). Use engineering notation but leave out the word "ohms". It is already written for you. If 5 volts is applied between the top and bottom connection, what would be the measured tota current through the resistors: Br BI Red resistor A Use engineering notation. No decimal places. YV Red resistor : CHoose the word that represents the current through this second resistor: same/larger/smaller ?

Exercise 2 (from chapter 6) For the diagram below, set up the following items; Kirchhoff loop for the bottom loop of the diagram. Kirchhoff loop for the top loop of the diagram. Kirchhoff loop for junctions A and B.

In the following circuit with resistors, the measurement points of a multimeter (the ends of each circle would represent its tips), are indicated by numbers, indicating which would be voltmeters or ammeters. R₁ 1.- 2.- 3.- 4.- 5.- 6.- 7.-

Use the C-Strip material cards to fill in each blank with the correct abbreviation by first computing the sum in the parentheses and putting that answer in the first blank.  Then add once more to get the answer (L + D) +W =  + W =  (R + B) +W =  + W =  (R + W) +D =  + D =  (L + Y) +R =  + R =

A ca r lot uses incandescent lamps to supply outside lighting during the night. There are three strings of lamps connected to a single 20-ampere circuit. Each string contains eight lamps. What is the largest standard lamp that can be used without overloading the circuit? Standard size lamps are 25 watts, 40 watts, 60 watts. 75 watts, and 100 watts.