Rope BCA passes through a pulley at point C and supports a crate at point A. Rope segment CD supports the pulley and is attached to an eye anchor embedded in a wall. Rope segment BC creates an angle of 68.0 with the floor and rope segment CD creates an angle with the horizontal. If both ropes BCA and CD can support a maximum tensile force Tosse 140 lb, what is the maximum weight Wass of the crate that the system can support? X What is the angle @ required for equilibrium? Express your answers numerically in pounds and degrees to three significant figures separated by a comma.

Rope BCA passes through a pulley at point C and supports a crate at point A. Rope segment CD supports the pulley and is attached to an eye anchor embedded in a wall. Rope segment BC creates an angle of 68.0 with the floor and rope segment CD creates an angle with the horizontal. If both ropes BCA and CD can support a maximum tensile force Tosse 140 lb, what is the maximum weight Wass of the crate that the system can support? X What is the angle @ required for equilibrium? Express your answers numerically in pounds and degrees to three significant figures separated by a comma.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The 500 kN crate is supported by three cables as shown.Determine the tension in cable CD.
The hemispherical dome in weighs 36.9 kN and is filled with water and attached to the floor by 6 equally spaced bolts. What is the force in KN in each bolt required to hold down the dome? Radius of the dome is 3 m, height of the pipe is 4 m and diameter of the pipe is 5 cm. Unit weight of water is 9.80 KN/m³. r BOLTS
FORMAT: QUESTION FIGURE FBD REQUIRED COMPLETE SOLUTION ANSWER I WILL UPVOTE IF YOU FOLLOW ALL OF THESE. THANK YOU
For the gusset plate with truss members at joint as shown in the figure, compute T force if the value of F is Kilonewton. 72 8 kN 45 5 kN F
i need the answer quickly i need all the steps, i need the answer in Handwritten.
Answer must be submitted within 25min, Hurry.
2. The crate weighs 45 0 kg and is supported by three cables as shown in the figure 2m below. 1m -2m- 1m a. Drawaf ree body diagram for point A 2m 2m b. Express the tension in each cable in terms of the unit vector and its unknown magnitude 3 m c. Determine the magnitude of the tension in each cable d. What is the maximum weight for a crate 0000 w that can be supported if the maximum tension in any cable is 900 kg? B.
Flexible cables BE and CD are used to brace the trussshown. Determine the load W to cause a compression force of 8.9 kNto member BD Which cable is in tension and what is the tensile reaction? If W = 20 kN, what will be the tensile reaction of memberCE?
If the bucket and its contents have a total weight of 20 lb, determine the force in the supporting cables DB A 3 ft 4.5 ft B -1.5 ft- 2.5 ft D 1.5 ft 3 ft y
The signboard truss is designed to support a horizontal wind load of 820 lb. If the resultant of this load passes through point C, calculate the forces in members BG and BF. The forces are positive if in tension, negative if in compression.HELP PLEASE! ASAP
pls answer correctly asap
Compute for the force in each member of the truss in figure 1. (show a complete and neat solution)