please solve all part 2, hydrology A thunderstorm cell 4.0 km in diameter has cloud base = 1.0 km. The ground surface indicatessaturated air conditions with temp= 30°C. The pressure is = 1 atm, wind speed 4.0 m/s, andaverage outflow elevation of 8.0 km. Calculate the precipitation intensity from this storm ifthe Lapse rate= 7.5°C/km, average air density and specific humidity between earth's surfaceand the base = 1.2 Kg/m3 and 0.019 kg/kg. assume that the specific humidity at the outflowcloud part is 0.00012 kg/kg.StationA1A2A3A4A5Recorded gauges have the following observed rainfall, calculate the Thiessen averagerainfall:402513part 2Calculate the unknown average rainfall from the missing station using the inverse distancesquared method for the following watershed that has the data below:P (mm) D4.5Part 12.71.6Recorded rainfall (mm)13.019.525.033.039.0part 310:20 PM ✔Enclosed Area (km2)1.503.22.04.72.8O310:20 PMP4

Answered: Image /qna-images/answer/5f6c9b04-a5b4-4a9c-9fb3-1b28defdf405.jpg

Recorded gauges have the following observed rainfall, calculate the Thiessen average rainfall: Station A1 A2 A3 A4 A5 Recorded rainfall (mm) 13.0 19.5 25.0 33.0 39.0 part 2 Enclosed Area (km2) 1.50 3.2 2.0 4.7 2.8 10:20 PM ✔

Recorded gauges have the following observed rainfall, calculate the Thiessen average rainfall: Station A1 A2 A3 A4 A5 Recorded rainfall (mm) 13.0 19.5 25.0 33.0 39.0 part 2 Enclosed Area (km2) 1.50 3.2 2.0 4.7 2.8 10:20 PM ✔

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Design a short, square tied column for service loads of 220 kips dead load and 160 kips live load.…

Q: B. Using Three Moment Equation, determine the reactions R₁, R2, and R3 on the figure below. Provide…

Q: Elevation of Point A = 630.57' Zenith angle from Point A to Point B = 84°-22'-15" Slope distance…

A: Zenith angle , sloping distance between point A and B and elevation of point A is given and it has…

Q: 2.) Determine the distance travelled by the 50-kg block and the time it will take as it comes to…

A: Inclination of plane, mass of block, kinematic coefficient and initial velocity is given and it has…

Q: be constant. 10. Which of the following most nearly gives the ma support A, in kN/m? a. 4.35 b. 5.15…

Q: Fig shows a steel tie rod 50 mm in diameter and 2.5 m long subjected to a pull of 100 kN to what…

A: First we summarise the given data : Dia. of steel tie rod = 50 mm Length = 2.5 mm Pull = 100 kN Bore…

Q: SCC and Plain Concrete What is superplasticizer and why do we use it?

A: Superplasticizers (SPs), also known as high range water reducers, are additives used in…

Q: = If u = xy + 2y³x. v = -0.5y² + 6x³z and w incompressible flow, value of will be 5y²x - y³z + x,…

Q: 5. The wood beam has an allowable shear stress of Tallow = 7 MPa. Determine the maximum shear force…

A: Given: The wooden beam shown in figure allowable shear stress = 7Mpa To determine: Maximum shear…

Q: Problems: Prob. 1. For the beam loaded as shown, determine the reaction components using both the…

Q: Q4/ In a detergent making process, 5.3 m³/h of water flows through a 50 mm pipe system as follows:…

A: Given Flow of water Q= 5.3 m3/h Diameter of pipe (d) = 50mm To find a)the head that the pump must…

Q: Find deflection at A using moment-area method. Use E = 2,000 k/in^2 and 1 = 400 in^4. 3 k A 3' B 9'…

Q: A 2-m-long pin-ended column with a square cross section is to be made of wood (Fig. ). Assuming E =…

A: Given data : Length of column = 2 m E = 13 GPa σall = 12 MPa FOS = 2.5 This is a problem of Solid…

Q: Q4. A spherical object of volume 1m³ floats on water (water = 9810 N/m³). Find the submerged volume…

Q: Design the steel reinforcement for flexural for the beam shown in the fig. below. given f'c-28 Mpa,…

A: A simply supported beam of span 6 m acted upon by A point live load = 200 kN A UDL dead load = 100…

Q: A bar of 80 mm diameter and 800 mm Length is subjected to an axial load of 200 kN. It elongates by…

Q: Draw the transmission path of water pressure on the plane steel sluice gate when retaining water.

A: Sluice Gate: A sluice gate is a vertical gate that is used to control the water flow into the canal.…

Q: ANALYZE THE BEAM USING THREE MOMENT EQUATION CREATE A SHEAR AND MOMENT DIAGRAM . FIND THE REACTIONS…

Q: LANATION NEEDED. FOLLOW THE INSTRUCTIONS CAREFULLY.) In an experiment, a soil is dug out from the…

A: Given data:- Weight of soil dug out from ground = 1364 gm Oven dried weight = 1067 gm Weight of…

Q: Fluid flows through the curved pipe at a steady rate. (Figure 1) Figure 0.5 m 45 10f1 Part A If the…

Q: Geotechnical Engineering (UPVOTE WILL BE GIVEN. PLEASE ANSWER THE QUESTION CORRECLTY. NO LONG…

Q: Fig(3-13a) shows a steel rod with variable cross-section subjected to a central force. Find the…

A: Given : E = 207 GPa This is a problem of solid mechanics where we are asked to determine the total…

Q: MEASURING ANGLES WITH TAPE. The measure 1063.55, 1840.33, and 1325.05 m. sides of a triangle…

Q: : Design the T-Beam section shown in fig. f'c=24 Mpa, fy=414 Mpa. L.L = 21 kN/m D.L=12 kN/m 3 m 450…

Q: A 5 m- B -5 m-

Q: 8. The national ambient air quality standard for sulfur dioxide is 80 ug m-³. Assuming an amount of…

A: Given National ambient air quality standard for sulfur dioxide = 80 ×10-3 mg/m3 Amount of air…

Q: Situation 1. From the figure no 1, point A is supported by a hinged while C and D are supported by a…

A: Given: Required: Reaction at support C, D and A

Q: Compute the latitude of: S 28°-07'-50" E 279.20' O-131.6378 +131.6378 -246.2197 O +246.2197

Q: In a certain portion of road to be constructed, the following data were taken. Station 1+020 8m 8.5m…

A: To determine: a) Compute area of first station. b) Compute area of second station. c) The value of…

Q: A P3 3 m B F P₁₁ -3 m E C P₂ 3 m D 3 m

Q: the cumulative particle gradation curve of the soil is steep, it means ( ). A. the soil particles…

Q: The figure shows the magnitudes of stresses of soil. Determine the following: Major and Minor…

Q: Q1) Determine the maximum deflection between the supports A and B. EI is constant. Use the method of…

A: Data given Find : Maximum deflection between supports A and B

Q: HW-3/ For the beam shown, find the maximum bending moment at point (c) due to a single concentrated…

Q: A simply supported rectangular beam of span 20.0 m is subjected to UDL. The minimum effective depth…

A: Given data- A simply supported rectangular beam- Span L = 20.0 m is subjected to UDL, The…

Q: A 3m-long, thin-walled section (thickness t = 4 mm, for all elements) is used as a cantilever to…

A: “Since you have asked multiple questions, we will solve the first question for you. If you want any…

Q: 9. A circular plate 2.5 meters in diameter is immersed in water, its greatest and least depth below…

Q: Using slope-deflection equations, determine the end moments of the beam and column of the frame…

A: Given To Find The end moment

Q: 1.3 What is the azimuth of line AB in Table 1.3. Table 1.3 Line AB ANS Bearing N 36° 47' 12.00" E

Q: 1- 2- 3- A hollow cast-iron cylinder 4m long, with 300mm outer diameter, and thickness of metal 50…

Q: A tube 2 mm thick has the shape shown in the figure Find the shearing stress caused by a torque of…

A: 2 mm thick tube is given as shown in the figure, shearing torque is also given and it has been asked…

Q: A vertical photograph was taken from a height of 3200 m above mean sea level with a camera of foca…

A: Given: H=3200m, f=120mm and the photo co-ordinates of a and b

Q: A steel column having a 24-ft effective length is loaded eccentri- cally as shown. Using the…

A: Given data: The effective length of the column, Le=24 ft Allowable stress, σy=36 ksi Modulus of…

Q: Tf = c' + o'n * tan o' Tf=? ; c'= ? ; o'n=? ; q'=?

Q: Landfills have historically been sources of all but ONE of the following: a. breeding grounds for…

A: Given Landfills have historically been sources of all but one of the following is-

Q: Slope at point A and deflection at midspan. 8 kN/m Aப் 7m A 3m 000 B

A: Given Data EI = constant Find slope at A and mid span deflection. Let's solve using Double…

Q: A board weighing 2.2 lb/ft and cross-sectional area of 8 in² dips into oil as shown in the figure.…

A: Given: W= 2.2 lb/ft, Cross sectional area, A = 8 in2

Q: What does it mean by Innovative techniques in repair and strengthening of concrete structures. (FRP…

A: FRP composite materials area unit comprised of high-strength continuous fibers, like glass, carbon,…

Q: Find deflection at D using conjugate beam method. 30 k 6' 6' 21 D 6' 21 E 6' 1

Q: Why is it important to consider the effect of stress history on the final settlement of foundations?…

A: Settlement refers to the vertical movement/displacement of soil due to the reductionof volume of…

Concept explainers

Precipitation

Precipitation forms the basis of the water cycle on the Earth. The air is packed with water molecules in the form of moisture or water vapor. This water vapor usually rises to the atmosphere due to density differences. Precipitation represents any form of water, in liquid form or frozen form that forms in the earth's atmosphere. The water vapor up in the atmosphere condenses due to low temperature and it leads to the formation of clouds. The water vapor that forms clouds on account of condensation, is preferably known as cloud droplet. These cloud droplets when become heavy and can no longer sustain the weight of condensed water droplets, they come to the Earth in the form of rain, snow, ice pellets, and hail. Precipitation patterns, evaporation, and condensation are the three parameters that decide the global water cycle, climate change, and weather. Additionally, smoke and dust particles are equally important parameters for precipitation, as they provide the surface area for the water vapors to get condensed and to form water droplets. So they are known as condensation nuclei. The presence of other pollutants in the air also serves as condensation nuclei. Precipitation always results in the pure water supply to earth, as the salt from the seawater does not evaporate with the water.

Question

please solve all part 2, hydrology

A thunderstorm cell 4.0 km in diameter has cloud base = 1.0 km. The ground surface indicates
saturated air conditions with temp= 30°C. The pressure is = 1 atm, wind speed 4.0 m/s, and
average outflow elevation of 8.0 km. Calculate the precipitation intensity from this storm if
the Lapse rate= 7.5°C/km, average air density and specific humidity between earth's surface
and the base = 1.2 Kg/m3 and 0.019 kg/kg. assume that the specific humidity at the outflow
cloud part is 0.00012 kg/kg.
Station
A1
A2
A3
A4
A5
Recorded gauges have the following observed rainfall, calculate the Thiessen average
rainfall:
40
25
13
part 2
Calculate the unknown average rainfall from the missing station using the inverse distance
squared method for the following watershed that has the data below:
P (mm) D
4.5
Part 1
2.7
1.6
Recorded rainfall (mm)
13.0
19.5
25.0
33.0
39.0
part 3
10:20 PM ✔
Enclosed Area (km2)
1.50
3.2
2.0
4.7
2.8
O
3
10:20 PM
P
4

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Q3: If Water temp. 18oc and a relative humidity (55 %), Wind velocity at 2 m above ground equal 21 km/hr, the saturated Vapor pressure 18.54 mm. and the reservoir of small surface area 100 hector, find the volume of water for 10 days?
Hydrology Problem:A reservoir is being planned for Albuquerque, NM. The design evaporation is set as the critical period of July. Compute evaporation depth during July using the Penman method. The net radiation is 361 ly/day with a pressure of 838 mb.Max Temperature: 92°FMax Wind Speed: 7.3 mphRelative Humidity: 31%Use the equation(s) to guide you:
Calculate the saturation deficit of the vapor pressure (Pa) from an open water surface with air temperature 22°C, relative humidity is 40% and wind speed is 3 m/s, all measured at height 2 m above the water surface. Assume a roughness height of 0.03 cm. The net radiation is 200 W/m^2.
2. Suppose the following atmospheric altitude versus temperature data have been collected: Temperature (0C) Altitude (m) 20 100 18 200 16 300 15 400 16 500 17 600 18 a) What would be the mixing depth? b) If the maximum daytime surface temperature is 22 °C, and the weather station anemometer at 10 m height shows winds averaging 4 m/s, what would be the ventilation coefficient? Assume stability class C and use the wind at the height halfway to the maximum mixing depth.
Calculate the latent heat of vaporization(J/kg) from an open water surface with air temperature 22°C, relative humidity is 40% and wind speed is 3 m/s, all measured at height 2 m above the water surface. Assume a roughness height of 0.03 cm. The net radiation is 200 W/m^2.
A single-storey 20 m wide × 20 m long× 3 m tall office building is used by 20 occupants. Each occupant generates 100 grams of water vapour per hour. The variable air volume terminal unit serving this office supplies 14 L/s of air at 17°C and 50% RH. Assume that the outdoor temperature and the relative humidity are -10°C and 80%, respectively. Under these conditions, the indoor air temperature and relative humidity remain constant at 22°C and 40% RH. Assume that the density of air is 1.2 kg/m3. Estimate the infiltration rate in air changes per hour. Pindoors=1053Pa rindoors=0.00653 kgw/kga Pout=227Pa rout=0.00140 kgw/kga Poffice=965Pa roffice=0.00598 kgw/kga V=1200m^3 A=400m^2
Hydrology Problem: A reservoir is being planned for Albuquerque, NM. The design evaporation is set as the critical period of July. Compute evaporation depth during July using the Penman method. The net radiation is 361 ly/day with a pressure of 838 mb. Max Temperature: 92°FMax Wind Speed: 7.3 mphRelative Humidity: 31%
4.2. What is the normal range of the air relative humidity for residential premises? Choose the correct answer:1. 20-40%;2. 20-50%;3. 30-60%;4. 35-70%;5. 40-80%;
#1 The maximum and minimum temperature recorded at a Lake is 18°C and 15°C in February. The mean air temperature (T), pan evaporation (Ep), wind speed (uz), relative humidity (RH), and net radiation (Rn) in a nearby weather station were found to be 23°C, 15 mm/day, 23 m/s, 47%, 20.54 MJ/m²/day, respectively. Estimate Lake evaporation (mm/day) using: (a) Pan Evaporation method, (b) Aerodynamic method, (c) Energy balance method, and (d) Penman method of combined aerodynamic and energy balance algorithm. Data you may need: 19.65 T Saturation vapor pressure, es = 611 e 273+T) where T is temperature in °C and es in Pa (You can also use table to read off the value of e, from internet or textbook (Table 2.9 or Appendix A) Assume, Pan Coefficient = 0.7 Bulk evaporation coefficient, CE = 1.3×10-3 Vapor pressure at elevation Z; ez = RH*es Atmospheric pressure at sea level = 101.3 kPa Density of air = 1.19 kg/m³ and for water = 1000 kg/m³ Bowen ratio = 0.1 Latent heat of vaporization (2) = 2.447…
Net radiation at the Laguna Lake is 175 W/m2 at noon on February 14th. Air temperature is 28.0°C, relative humidity is 72%, and wind speed is 1.8 m/s at 2 m. Determine the open water evaporation rate in mm/d using the combined method
Estimate the amount of precipitable water in a saturated air column 1.5 m² of ground surface. The surface pressure is 101.3 kPa, the surface air temperature is 28°C, and lapse rate is 6.5°C/km. R = 287 J/kg-K. Estimate the precipitable water if the average specific humidity and air densities from one level to another is 0.0101 and 0.8849 respectively. Distance between two levels is 1500 m Total Precipitable Water, in kg Round to three (3) decimal places Add your answer
5. Sunshine falls onto a large lake with a surface area of 300 km?. If the water has an albedo of 0.2 and the sun's average intensity is 800 Wm?, calculate the depth of water evaporated over 10 hours. (а) 2 mm (b) 10 mm (c) 0.0025 mm (d) 9 mm ANS D