Question 4 of 11-/ 10View PoliciesCurrent Attempt in ProgressA cylindrical boiler with an outside diameter of 3.60 m and a wall thickness of 40 mm is made of a steel alloy that has a yield stress of422 MPa. Determine the maximum allowable pressure if a factor of safety of 3.3 with respect to yield is required.O 3.42 MPaО 3.74 МРаO 2.91 MPaO 2.70 MPaO 1.83 MPaAttempts: 0 of 1 usedSubmit AnswerSave for Later

Answered: Image /qna-images/answer/809e280d-4b32-44ae-b0ba-73d2a2bc907d.jpg

Question 4 of 11 < > -/ 10 View Policies Current Attempt in Progress A cylindrical boiler with an outside diameter of 3.60 m and a wall thickness of 40 mm is made of a steel alloy that has a yield stres 422 MPa. Determine the maximum allowable pressure if a factor of safety of 3.3 with respect to yield is required. O 3.42 MPa O 3.74 MPa O 2.91 MPa O 2.70 MPa O 1.83 MPa Attempts: 0 of 1 used Submit Answ Save for Later

Question 4 of 11 < > -/ 10 View Policies Current Attempt in Progress A cylindrical boiler with an outside diameter of 3.60 m and a wall thickness of 40 mm is made of a steel alloy that has a yield stres 422 MPa. Determine the maximum allowable pressure if a factor of safety of 3.3 with respect to yield is required. O 3.42 MPa O 3.74 MPa O 2.91 MPa O 2.70 MPa O 1.83 MPa Attempts: 0 of 1 used Submit Answ Save for Later

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

vertical axis circular cylindrical storage tank, fabricated from stainless steel has a total height of 8meters and a radius of 1.5meters and is filled to a depth of h - 6meters of wine. An inert gas occupies the 2m height ho, above the free liquid surface and is pressurized to a value of 96kPa. The working stress in the steel is 58Mpa. The specific weight of the wine 9.8kN/m^3 1. What is the required wall thickness of the tank?
2: A stream boiler of 800 mm diameter is made up of 10 mm thick plates. boiler is subjected to an internal pressure of 2.5 MPa, find the circumferential and longitudinal stresses induced in the boiler plates. (3 KST
Q1: Derie an epressin for the shear stress at the pipe wall when an incompressible faid flows draugh a pipe wnder pressure. Use dinmsional ana)sis witk the following siguißcant parameters: pipe diameter D, flow velociy V, and vicenity and density p of the fuid. Q2: : Use dinensional analysis to derive as epression for the power develaped by an engine in terms of the torque T and rotartive speed u.
7. A PFR is not meeting effluent requirements so baffles are going to be added to the tank to increase contact time. The tank is 12 ft deep, 40 ft wide, and 120 ft long. The engineer is going to add long baffles to the tank. The baffles will be 90% of the tank length. If the current HRT is 0.5 d, and the influent concentration is 9 mg/L with an effluent limit of 1.5 mg/L, how many baffles need to be added? Assume k-1.98/day
5. Water in a hydraulic press is under a pressure of 92.580 MPa abs. at 15 °C. If the initial pressure is 150 kPa abs. What will be the decrease in specific volume if its bulk modulus is 2.13 GPa? a. -4.34% c. 5.34% 6. A tank contains 1.5 column of mercury of sp. gr. 13.6, 1.8 column of water and 1.2 column of oil (SG= 0.81). What is the pressure at the bottom of the tank? a. 225.31 kPa. c. 345.23 kPa b. -3.22% d. 4.14% Good luck and b. 184.33 kPa d. 227.32 kPa Leading Innovations, Transforming Lives, Building the Nation for HGEL 7. A square frame 3 m by 3 m in dimension is submerged in water vertically with its top 3 m from the surface. If oil (s 0.80) occupies the top meter. = a. 59.60 kPa c. 56.90 kPa b. 43.53 kPa d. 54.34 kPa
A parallel-plate air-filled capactor has a capacitance of 50 pF and each of its plates has an area of 0.35 m2. If the region between the plates is filled with material having K = 5.6, what is the capacitance? 195 pF 280 pF 260 pF
Oil of viscosity 0.1 Pa.s and specific gravity 0.90, flows through a horizontal pipe of 25 mm diameter. If the pressure drop per meter length of the pipe is 12 kPa, determine (a) the rate of flow in N/min; (b) the shear stress at the pipe wall; (c) the Reynolds number of the flow; and (d) the power required in W per 50 m length of pipe to maintain the flow. [Take: unit weight of water = 9810 N/m³]
A spherical tank with 20.010m diameter is to be used to store gas. The shell plating is 10mm thick and the working stress if the material is 125 MPa. What is the maximum permissible gas pressure? Please show complete solution
1. When the force of 3 mN is applied to the plate the line AB in the liquid remains straight and has a velocity of 0.6x10-3 m/s. If the surface area of the plate in contact with the liquid is 0.6 m2, determine the approximate viscosity of the liquid. В B' 3 mN 4 mm A
The thin steel cylinder just fits over the inner aluminum cylinder as shown in Fig. 4-7. Find the tangential stresses in each shell due to a temperature rise of 33°C. Do not consider the effects introduced by the accompanying axial expansion. (This arrangement is sometimes used for storing corrosive fluids.) Use Est = 200 GPa Eal = 72 GPa SOLUTION: The simplest approach is to first consider the two shells to be separated from one another so that they are no longer in contact. 51 cm 150.5 cm 50 cm α = 17.3x10-6/°C = 22.5×10 %/°C αal = Steel Aluminum Fig. 4-7
3 Hydraulic conductivity & stress. Masseutsendelser Se gjennom Visning Hjelp Os AaBbCcI AaBbCcl AaBbC AaBbCcl AaB AaBbCcD T Normal TIngen m.. Overskrift 1 Overskrift 2 Tittel Undertittel Avsnitt Stiler Redic 5. If the axial stress on a cylindrical sample is decreased and the radical stress in increased by twice the decrease in axial stress, show that the stress path has a slope q/P =- 3. Plot the stress path. ignet Undersek 16°C
F.developed laminar flow,,