Gurland Valves Company manufactures brass valves that meet precise specification standards. All finished valves are inspected before being packaged and shipped to customers. Rejected valves are returned to the initial production stage to be melted and recast. Such rework requires no new materials in casting but requires new materials in finishing.
Q: Compute the amount of the loss as a result of the fire, assuming that the corporation had no…
A: The inventory that is sold or distributed and that has been purchased as finished goods or requires…
Q: Problem 1AuditorAs audit senior in Carollo and Co and you are commencing the planning of the audit…
A: The objective of the question is to identify and explain the audit risks that can be identified at…
Q: Exercise 8-3 (Algo) Bond Sale at Discount (Effective Interest Method) LO 8-2 Purse Corporation owns…
A: A journal entry records a business transaction in the accounting system of a company. Journal…
Q: Windsor Inc. uses LIFO inventory costing. At January 1, 2025, inventory was $211.589 at both cost…
A: Conduct research on comparable products or similar things that have recently been sold in the market…
Q: Linzee Liners estimates that its manufacturing overhead will be $1,725,000 in Year 1. It further…
A: The overhead is generally applied to the job based on the predetermined overhead rate. The rate is…
Q: Mazie Supply Company uses the percent of accounts receivable method. On December 31, it has…
A: The allowance for doubtful accounts is created to record the estimated bad debt expense for the…
Q: What is double entry for the following transaction: Started business with MK16,000 in bank
A: The objective of the question is to understand the double entry for the transaction of starting a…
Q: Sandy Bank, Incorporated, makes one model of wooden canoe. Partial information is given below.…
A: The question is related to Marginal costing. The Contribution margin per unit is calculated with the…
Q: Assume the perpetual inventory system is used. Required: 1. Complete the table to determine the cost…
A: Inventory Valuation is a method of calculating the value of stock at the end of an accounting…
Q: Account balances and information relating to bonds payable during the year: B/P Premium on B/P…
A: Journal Entries for Bonds Payable Transactions:1. Bond Issuance for Land: Debit: Land ($20,000 x…
Q: Wildhorse Company has the following production data for selected months. Ending Work in Process…
A: WEIGHTED AVERAGE METHOD :— Under this method, equivalent units are calculated by adding equivalent…
Q: White Oaks Properties builds strip shopping centers and small malls. The company plans to replace…
A: A financial statistic called equivalent annual cost is used to assess an investment's or project's…
Q: Hickory Company manufactures two products-15,000 units of Product Y and 7,000 units of Product Z.…
A: The overhead is referred to as indirect cost, that is the cost which cannot be associated with the…
Q: Mirembe PLC manufactures recyclable soft-drink cans. A unit of production is a case of 12 dozen…
A: To post the journal entries for Mirembe PLC's manufacturing operations, we first need to calculate…
Q: Prepare adjusting entries for the following transactions of the Bramble Ice Cream Shoppe for the…
A: NoAccounts & ExplanationsDebitCreditWorkings 1Supplies expense$3,486420+3276-210…
Q: Analyze Capital Projects and Provide Recommendations Randolph Inc. is considering the following…
A: The Net Present Value (NPV) is the formula which determines the present value of annual cash flows…
Q: Triton Company's copy department, which does almost all of the photocopying for the sales department…
A: VARIABLE COST Variable Cost is a cost that varies with the level of output.variable costs include…
Q: On January 1, Wet Company begins the accounting period with a $35,000 credit balance in Allowance…
A: Journal Entry :— It is an act of recording transactions in books of account when transaction…
Q: Jillet Corporation began the year with inventory of 19,000 units of its only product. The units cost…
A: The last in-first out is an inventory valuation method, as per this method the cost of goods sold…
Q: Retro Clothes uses a perpetual inventory system. Journalize the following transactions for Retro…
A: Assuming the Company is using in recording its Sales. Here are the Journal entries for the following…
Q: What is the role of the managing committee in cooperative society? A. Admission & Allocation of…
A: The question is asking about the role of the managing committee in a cooperative society. A…
Q: Required: Calculate Augustine's income tax liability for the year ended 30 June 2020, if he is…
A: Tax liabilityThe amount of money paid by the government on the income or gains earned by a company…
Q: Fixed administrative expense per year $125,000 Capacity for the year 25,000 % of next month's sales…
A: The budgeted income statement is typically prepared at the beginning of the year because it aids in…
Q: Activity and selected costs for three production departments (Training, Independent, and Commercial)…
A: The reciprocal method allocates support-department costs to operating departments by fully…
Q: For financial reporting, Kumas Poultry Farms has used the declining-balance method of depreciation…
A: The objective of the question is to prepare the journal entry for the year 2024 related to the…
Q: The financial statements of an entity can be regarded as meaningful when OA. The statement of…
A: Financial statements are considered meaningful when they provide relevant financial information…
Q: One of these components is not included in the current asset of an organisation. O A. Short term…
A: Current assets include those assets that a company can convert into cash within a year. Current…
Q: A company issues $15,000,000, 7.8%, 20-year bonds to yield 8% on January 1, 2022. Interest is paid…
A: Bonds/Notes are the instruments/ securities issued by the companies to raise funds for the company…
Q: Sheridan Company completed its first year of operations on December 31. 2022. It initial income…
A: A cash flow statement denotes total amount cash is inflows and cash outflows your business in a…
Q: Crane Tailors sells tablet PCs combined with Internet service, which permits the tablet to connect…
A: Journal entry:The monetary transaction of business is recorded in the books of accounts called the…
Q: Entries Related to Uncollectible Accounts The following transactions were completed by The Wild…
A: The objective of the question is to journalize the transactions related to accounts receivable and…
Q: Required: 1. Calculate the LCNRV for the: a. inventory by major group b. inventory, applied…
A:
Q: Martinez Co. recently installed some new computer equipment. To prepare for the installation,…
A: Asset is something which is owned by the company.Computer equipment is a fixed or non-current asset…
Q: Blossom Company is considering the purchase of a new machine. The invoice price of the machine is…
A: A method used in corporate decision-making to ascertain the actual cost difference between potential…
Q: NightWounds Time Brewing Co. distributes its products in an aluminum keg. Customers are charged a…
A: The company organization may better understand changes in different financial statements, such as…
Q: Additional information. 1. Depreciation for accounting and tax purposes are 20% and 25%…
A: Deferred tax liability:The deferred tax liability is the amount that is created when the company has…
Q: How much money must you invest now at 4.1% interest compounded continuously in order to have $10,000…
A: The objective of this question is to find out the initial investment required to reach a future…
Q: [The following Information applies to the questions displayed below.] A company reports the…
A: Under the LIFO method, inventory purchased last is sold first. Under this method of inventory…
Q: Cullumber Corporation, which uses ASPE, enters into a 6-year lease of equipment on September 1,…
A: The objective of the question is to calculate the amount of the capital lease and prepare the…
Q: Ms. Hill earned a $110,000 salary, and Mr. Gomez earned a $202,400 salary. Neither individual had…
A: Income Tax is a statutory or mandatory tax payable by individuals and other entities on the taxable…
Q: Required: 1. Prepare the journal entry at January 1, 2024, to the deferred tax liability account.)…
A: The record of day-to-day transactions in the books of accounts is called journal entries. In a…
Q: Wilmington Company has two manufacturing departments-Assembly and Fabrication. It considers all of…
A: The overhead is applied to the production on the basis of the pre-determined overhead rate. The…
Q: Additional information For the year ended 30 June 2021, Kecil Ltd also reported a comprehensive…
A: Journal entry:The monetary transaction of business is recorded in the books of accounts called the…
Q: The following is from the 2024 annual report of Kaufman Chemicals, Incorporated: Years Ended…
A: Other Comprehensive Income: The other comprehensive income includes all the gains, expenses, losses,…
Q: Average Temperature Utility Cost January February 31°F $ 764 41 633 March 43 547 April 44 414 May 46…
A: High-low method:The high-low method is a method used to separate the variable cost and fixed cost…
Q: Problem 7-2A (Algo) Estimating and reporting bad debts LO P2, P3 [The following information applies…
A: ALLOWANCE FOR DOUBTFUL DEBT ACCOUNT Allowance for Doubtful Debt Account is Considered as Contra…
Q: On January 1, 2024, the Excel Delivery Company purchased a delivery van for $35,850. At the end of…
A: It is the amount of reduction in the value of a tangible fixed asset due to tear and wear,…
Q: Suppose that Target Corporation uses the periodic inventory system to account for inventories and…
A: Inventory includes all the items, merchandise, and raw materials that are used by the business…
Q: Assume the following information for a company that produced 10,000 units and sold 9,000 units…
A: Inventory in terms of accounting means all the items held by the company for the purpose of sale and…
Q: the color for some of the items delivered was a bit different than what appeared in the catalog.…
A: Journal entry:Journal entry means recording the day-to-day business transactions in the books of…
Variance Analysis
In layman's terms, variance analysis is an analysis of a difference between planned and actual behavior. Variance analysis is mainly used by the companies to maintain a control over a business. After analyzing differences, companies find the reasons for the variance so that the necessary steps should be taken to correct that variance.
Standard Costing
The standard cost system is the expected cost per unit product manufactured and it helps in estimating the deviations and controlling them as well as fixing the selling price of the product. For example, it helps to plan the cost for the coming year on the various expenses.
Trending now
This is a popular solution!
Step by step
Solved in 3 steps
- Reducir, Inc., produces two different types of hydraulic cylinders. Reducir produces a major subassembly for the cylinders in the Cutting and Welding Department. Other parts and the subassembly are then assembled in the Assembly Department. The activities, expected costs, and drivers associated with these two manufacturing processes are given below. Note: In the assembly process, the materials-handling activity is a function of product characteristics rather than batch activity. Other overhead activities, their costs, and drivers are listed below. Other production information concerning the two hydraulic cylinders is also provided: Required: 1. Using a plantwide rate based on machine hours, calculate the total overhead cost assigned to each product and the unit overhead cost. 2. Using activity rates, calculate the total overhead cost assigned to each product and the unit overhead cost. Comment on the accuracy of the plantwide rate. 3. Calculate the global consumption ratios. 4. Calculate the consumption ratios for welding and materials handling (Assembly) and show that two drivers, welding hours and number of parts, can be used to achieve the same ABC product costs calculated in Requirement 2. Explain the value of this simplification. 5. Calculate the consumption ratios for inspection and engineering, and show that the drivers for these two activities also duplicate the ABC product costs calculated in Requirement 2.Operations Costing Sign It! makes outdoor advertising signs which it sells to advertising companies. The company uses operation costing and manufactures their outdoor signs in four operations. In the Cutting operation, the signs are cut into the correct size from large, unfinished sheets they acquire from an outside supplier. In Finishing, the edges are smoothed and a magnetic metal surface is added. In Framing, the signs are inserted into a metal frame and stand. In Packaging, the signs are inspected and packaged. Not all signs are framed as some customers prefer to insert the sign into their own frames. During January of the current year, the following conversion costs will be incurred by the company: Cutting Finishing Framing Packaging $280,000 $130,200 $84,000 $56,000 Sign It! computes conversion cost rates per unit each month. In January, the company will manufacture 70,000 signs, 20,000 of which will NOT be framed. Details of two work orders for January…Gurland Valves Company manufactures brass valves that meet precise specification standards. Allfinished valves are inspected before being packaged and shipped to customers. Rejected valvesare returned to the initial production stage to be melted and recast. Such rework requires no newmaterials in casting but requires new materials in finishing.The following unit cost data for direct materials, direct labor, and time-driven activity-basedcosting (ABC) are available: Costs: Direct Materials: Casting: $225 Finishing: $12 Inspection: $0 Packaging: $8 Direct Labor: Casting: $84 Finishing: $121 Inspection: $24 Packaging: $16 Support: Casting: $122 Finishing: $164 Inspection: $30 Packaging: $20 As a result of a quality improvement program, the reject rate has decreased from 6.4% to 5.1%,and the number of rejects has decreased by ( 6.4% - 5.1%) x (10,000) units. Improvements in rejectrates have also led to a decrease in work-in-process inventory from $386,000 to $270,000.Inventory…
- Robotic Construction Toys Corp. is using a costs-of-quality approach to evaluate design engineering efforts for a new toy robot. The company's senior managers expect the engineering work to reduce appraisal, internal failure, and external failure activities. The predicted reductions in activities over the two-year life of the toy robot follow. Also shown are the cost allocation rates for the activities. (Click on the icon to view the information.) Data table Activity Inspection of incoming materials Inspection of finished goods.... Number of defective units discovered in-house. Number of defective units discovered by customers.. Lost sales to dissatisfied customers Requirements ...... **** Predicted Reduction in Activity Units 3. What major difficulty would management have had in implementing this costs-of-quality approach? What alternative approach could it use to measure quality improvement? 300 $ 300 $ 3,200 $ 900 $ 320 $ - 1. Calculate the predicted quality cost savings from the…Required information Use the following information for the Problems below. (Algo) [The following information applies to the questions displayed below.] Tamar Company manufactures a single product in two departments: Forming and Assembly. Information for the Forming process for May follows. Beginning work in process inventory Units started this period Units completed and transferred out Ending work in process inventory Beginning work in process inventory Direct materials Conversion Costs added this period Direct materials Conversion Total costs to account for Direct MaterialsConversion Percent Percent Complete Complete 40% Units 5,700 100% 41,040 42,180 4,560 100% $ 37,620 421,686 $ 459,306 943,920 4,115,286 5,059,206 5,518,512 olem 3-4A (Algo) FIFO: Production cost report LO C2, P4 $ 80% me that Tamar uses the FIFO method of process costing. The units started and completed for may total 19,200. ired: Prepare the Forming department's production cost report for May using FIFO. Prepare…Benson Pharmaceuticals uses a process-costing system to compute the unit costs of the over-the-counter cold remedies that it produces. It has three departments: mixing, encapsulating, and bottling. In mixing, the ingredients for the cold capsules are measured, sifted, and blended (with materials assumed to be uniformly added throughout the process). The mix is transferred out in gallon containers. The encapsulating department takes the powdered mix and places it in capsules (which are necessarily added at the beginning of the process). One gallon of powdered mix converts into 1,500 capsules. After the capsules are filled and polished, they are transferred to bottling, where they are placed in bottles that are then affixed with a safety seal, lid, and label. Each bottle receives 50 capsules. During March, the following results are available for the first two departments: Overhead in both departments is applied as a percentage of direct labor costs. In the mixing department, overhead is 200% of direct labor. In the encapsulating department, the overhead rate is 150% of direct labor. Required: 1. Prepare a production report for the mixing department using the weighted average method. Follow the five steps outlined in the chapter. (Note: Round to two decimal places for the unit cost.) 2. Prepare a production report for the encapsulating department using the weighted average method. Follow the five steps outlined in the chapter. (Note: Round to four decimal places for the unit cost.) 3. CONCEPTUAL CONNECTION Explain why the weighted average method is easier to use than FIFO. Explain when weighted average will give about the same results as FIFO.
- AKL Foundry manufactures metal components for different kinds of equipment used by the aerospace, commercial aircraft, medical equipment, and electronic industries. The company uses investment casting to produce the required components. Investment casting consists of creating, in wax, a replica of the final product and pouring a hard shell around it. After removing the wax, molten metal is poured into the resulting cavity. What remains after the shell is broken is the desired metal object ready to be put to its designated use. Metal components pass through eight processes: gating, shell creating, foundry work, cutoff, grinding, finishing, welding, and strengthening. Gating creates the wax mold and clusters the wax pattern around a sprue (a hole through which the molten metal will be poured through the gates into the mold in the foundry process), which is joined and supported by gates (flow channels) to form a tree of patterns. In the shell-creating process, the wax molds are alternately dipped in a ceramic slurry and a fluidized bed of progressively coarser refractory grain until a sufficiently thick shell (or mold) completely encases the wax pattern. After drying, the mold is sent to the foundry process. Here, the wax is melted out of the mold, and the shell is fired, strengthened, and brought to the proper temperature. Molten metal is then poured into the dewaxed shell. Finally, the ceramic shell is removed, and the finished product is sent to the cutoff process, where the parts are separated from the tree by the use of a band saw. The parts are then sent to the grinding process, where the gates that allowed the molten metal to flow into the ceramic cavities are ground off using large abrasive grinders. In the finishing process, rough edges caused by the grinders are removed by small handheld pneumatic tools. Parts that are flawed at this point are sent to welding for corrective treatment. The last process uses heat to treat the parts to bring them to the desired strength. In 20X1, the two partners who owned AKL Foundry decided to split up and divide the business. In dissolving their business relationship, they were faced with the problem of dividing the business assets equitably. Since the company had two plantsone in Arizona and one in New Mexicoa suggestion was made to split the business on the basis of geographic location. One partner would assume ownership of the plant in New Mexico, and the other would assume ownership of the plant in Arizona. However, this arrangement had one major complication: the amount of WIP inventory located in the Arizona plant. The Arizona facilities had been in operation for more than a decade and were full of WIP. The New Mexico facility had been operational for only 2 years and had much smaller WIP inventories. The partner located in New Mexico argued that to disregard the unequal value of the WIP inventories would be grossly unfair. Unfortunately, during the entire business history of AKL Foundry, WIP inventories had never been assigned any value. In computing the cost of goods sold each year, the company had followed the policy of adding depreciation to the out-of-pocket costs of direct labor, direct materials, and overhead. Accruals for the company are nearly nonexistent, and there are hardly ever any ending inventories of materials. During 20X1, the Arizona plant had sales of 2,028,670. The cost of goods sold is itemized as follows: Upon request, the owners of AKL provided the following supplementary information (percentages are cumulative): Gating had 10,000 units in BWIP, 60% complete. Assume that all materials are added at the beginning of each process. During the year, 50,000 units were completed and transferred out. The ending inventory had 11,000 unfinished units, 60% complete. Required: 1. The partners of AKL want a reasonable estimate of the cost of WIP inventories. Using the gating departments inventory as an example, prepare an estimate of the cost of the EWIP. What assumptions did you make? Did you use the FIFO or weighted average method? Why? (Note: Round unit cost to two decimal places.) 2. Assume that the shell-creating process has 8,000 units in BWIP, 20% complete. During the year, 50,000 units were completed and transferred out. (Note: All 50,000 units were sold; no other units were sold.) The EWIP inventory had 8,000 units, 30% complete. Compute the value of the shell-creating departments EWIP. What additional assumptions had to be made?The management of Wheeler Company has decided to develop cost formulas for its major overhead activities. Wheeler uses a highly automated manufacturing process, and power costs are a significant manufacturing cost. Cost analysts have decided that power costs are mixed; thus, they must be broken into their fixed and variable elements so that the cost behavior of the power usage activity can be properly described. Machine hours have been selected as the activity driver for power costs. The following data for the past eight quarters have been collected: Required: 1. Prepare a scattergraph by plotting power costs against machine hours. Does the scatter-graph show a linear relationship between machine hours and power cost? 2. Using the high and low points, compute a power cost formula. 3. Use the method of least squares to compute a power cost formula. Evaluate the coefficient of determination. 4. Rerun the regression and drop the point (20,000; 26,000) as an outlier. Compare the results from this regression to those for the regression in Requirement 3. Which is better?Lacy, Inc., produces a subassembly used in the production of hydraulic cylinders. The subassemblies are produced in three departments: Plate Cutting, Rod Cutting, and Welding. Materials are added at the beginning of the process. Overhead is applied using the following drivers and activity rates: Other data for the Plate Cutting Department are as follows: Required: 1. Prepare a physical flow schedule. 2. Calculate equivalent units of production for: a. Direct materials b. Conversion costs 3. Calculate unit costs for: a. Direct materials b. Conversion costs c. Total manufacturing 4. Provide the following information: a. The total cost of units transferred out b. The journal entry for transferring costs from Plate Cutting to Welding c. The cost assigned to units in ending inventory
- Warren Furniture produces three models of desk chairs: Basic, Ergo, and Exec. The cost system at the Warren production facility allocates overhead cost on the basis of direct labor hours. The company is considering updating its cost system to an activity-based costing system and is interested in understanding the effects. A study team composed of the production facility's finance and operations groups has identified three overhead cost pools along with appropriate cost drivers for each pool. Cost Pools Assembly Setup Quality assurance Costs $ 2,925,000 1,023,000 642,000 Activity Drivers Direct labor-hours Number of setups Number of tests The plans for production for the next year and the budgeted direct costs and activity by product line are as follows: Direct costs (material and labor) Basic $ 1,006,800 Direct labor-hours 25,200 Products Ergo $ 1,143,000 12,000 Exec $ 868,800 Machine-hours 29,200 17,200 Number of setups Number of tests Number of units produced 48 140 7,200 72 100…Way Cool produces two different models of air conditioners. The company produces the mechanical systems in its components department. The mechanical systems are combined with the housing assembly In Its finishing department. The activities, costs, and drivers associated with these two manufacturing processes and the production support process follow. Process Activity Components Changeover Machining Setups Finishing Welding Support Inspecting Rework Purchasing Providing space Providing utilities Units produced Welding hours Batches Number of inspections Machine hours Setups Rework orders Purchase orders Required 1 Overhead Cost $ 559,650 411,510 74,000 $1,045,160 $ 288,640 257,600 55,000 601,240 $ $ 194,540 30,800 37,960 $ 263,300 Additional production Information concerning its two product lines follows. Required 2 Model 145 1,200 1,200 455 475 3,350 20 150 365 Driver Number of batches Machine hours Number of setups Required 3 Welding hours Number of inspections Rework orders Purchase…Activity-Based Supplier Costing Clearsound uses Alpha Electronics and La Paz Company to buy two electronic components used in the manufacture of its cell phones: Component 125X and Component 30Y. Consider two activities: testing components and reordering components. After the two components are inserted, testing is done to ensure that the two components in the phones are working properly. Reordering occurs because one or both of the components have failed the test and it is necessary to replenish component inventories. Activity cost information and other data needed for supplier costing are as follows: I. Activity Costs Caused by Suppliers (testing failures and reordering as a result) Activity Costs Testing components $1,200,000 Reordering components 300,000 II. Supplier Data Alpha Electronics La Paz Company 125X 30Y 125X 30Y Unit purchase price $10 $26 $12 $28 Units purchased 120,000 60,000 15,000 15,000 Failed…