Q2//The rotational-speed of an impulse turbine wheel is 3000 r.p.m. The nozzles are inclined at 20° and their efficiency is 0.89. The isentropic heat drop for the stage is 159 kJ/kg. If the blade speed ratio is 0.4, the blade speed coefficient is 0.82, and the blade efficiency is 0.76. Find for steam flow rate of 15 kg/s: 1. The mean blade ring diameter. 2. The power developed by the stage. B = 32.4°;ße = 38.5°). %3D Answer (1.355m, 1613.2 kW,

Q2//The rotational-speed of an impulse turbine wheel is 3000 r.p.m. The nozzles are inclined at 20° and their efficiency is 0.89. The isentropic heat drop for the stage is 159 kJ/kg. If the blade speed ratio is 0.4, the blade speed coefficient is 0.82, and the blade efficiency is 0.76. Find for steam flow rate of 15 kg/s: 1. The mean blade ring diameter. 2. The power developed by the stage. B = 32.4°;ße = 38.5°). %3D Answer (1.355m, 1613.2 kW,

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter40: Typical Operating Conditions

Section: Chapter Questions

Problem 10RQ: The seasonal energy efficiency ratio (SEER) includes the energy used in the _____and _____cycles.

See similar textbooks

Similar questions

A turbine receives steam at 10 MPa, 6000C and exhaust it at 0.2 MPa. (a) for the actual engine,the brake engine efficiency is 84%; the driven generator efficiency is 93% and the rated output of the generator is 30 MW. Compute the combined work, combined heat rate, and the total throttle flow for the rated power.
Problem (5.3) The outlet angles of the nozzle and blades of a two-row impulse turbine are in succession 16°, 18°, 20° and 30° and the corresponding nozzle and blade velocity coefficients are 0.92, 0.72, 0.78 and 0.84. The flow through the nozzle is at the rate of 4 kg/s, and the supply is at 1.2 MPa and 50°C superheat. The chamber pressure is 0.5 MPa and the blade speed is 1/5 that of the jet speed leaving the nozzle. Determine the work done and the blade efficiency. Ans. [391.67 kW, 61.13 %]
Problem (5.3) The outlet angles of the nozzle and blades of a two-row impulse turbine are in succession 16°, 18°, 20° and 30° and the corresponding nozzle and blade velocity coefficients are 0.92, 0.72, 0.78 and 0.84. The flow through the nozzle is at the rate of 4 kg/s, and the supply is at 1.2 MPa and 50°C superheat. The chamber pressure is 0.5 MPa and the blade speed is 1/5 that of the jet speed leaving the nozzle. Determine the work done and the blade efficiency.
In a single stage impulse turbine the blade angles are equal and the noz-le angle is 20 degrees . The velocity coefficient for the blade is 0.83. Find the maximum blade efficiency possible. If the actual blade efficiency is 90% of maximum blade efficiency, find the possible ratio of blade speed to steam speed.
In a single stage impulse turbine the blade angles are equal and the nozzle angle is 20°. The velocity coefficient for the blade is 0.83. Find the maximum blade efficiency possible. If the actual blade efficiency is 90% of maximum blade efficiency, find the possible ratio of blade speed to steam speed.
Q 2: - A one cylinders Freon (134a) compressor has a Bore and Stroke 5.4 and 4.8 cm respectively. It is speed 1450 rpm volumetric efficiency c.v 100% working fluid reaches expansion valve at 42°C and the temperature %3D of its suction -8°C:- a- Find the mass flow rate of the refrigerant, heat capacity and COPact& COPtho? b- Find the mass flow rate of the refrigerant, heat capacity and COP & COPtho if the clearance factor will be 5%?
5. A single row impulse turbine receives 3 kg / sec steam with a friction etc amount to 15 KW, determine the blading efficiency and the blade velocity coefficient. The nozzle angle is 16° and the blade exist angle is 17°
Q - The rotor of an impulse turbine is 60 cm diameter and runs at 9,600 r.p.m. The nozzles are at 20° to the plane of the wheel, and the steam leaves them at 600 m/sec. The blades outlet angle are 30° and the friction factor is 0.8. Calculate the power developed per kg of steam per second and the diagram efficiency.
Hi! Super needed rn, pleaase help me!! A steam throttling valve with inlet conditions of 2MPa and 400C is connected to the inlet of the turbine. The turbine has 200kW power output and heat abstracted of 100kW. If the mass flow rate is 1kg/s and the exit temperature of steam is 300C, find the exit turbine pressure.
(a) What would be the necessary bore and stroke of a single acting four- cylinder, 350 rpm ammonia compressor working on simple saturation cycle between 35°C condenser and -15°C evaporator temperatures and developing 15 tons refrigeration. Given for the compressor: Ratio of stroke to bore = 1 Volumetric efficiency = 0.7 (b) If the index of compression is 1.15, find the error introduced in calculat- ing the work of compression by assuming the process to be isentropic. Also, find the heat rejected to the compressor-jacket cooling water.
2.A steam throttling valve with inlet conditions of 3MPA and 500C is connected to the inlet of the turbine. The turbine has 800kW power output and heat absorbed of 500kw. If the mass flow rate is 1kg/s and the exit temperature of steam is 400C, find the exit turbine pressure. (
In a certain stage of impulse turbine the nozzle angle is 20° with the plane oi he wheel. The mean diameter of the blade ring is 2.8m. It develops 54k W at 2400rpm> Four nozzles, each of lcm diameter expand steam isentropically from 1.5MPA, 250°C to 50kPa. The axial thrust is 3.34N. Calculate (1) the blade angles at entrance and exit of the moving blades, (2) The power lost in blade friction, and(3) the stage Efficiency