Q2// It is required to produce a granulated product (P) from the feed material (F) by theprocess shown in the block diagram (all percentages are given in wt. %). Calculate the flowrates of all streams in the process.Recycle (R)Outlet air (A)10 % Water6% water94 % air90 % Solid(T)(G)Product (P)GranulatorDryerDivider50 % WaterFeed (F) = 400 kg/hr50 % Solid%3DInlet air (A)73 % Water2% water27 % Solid98 % airAns. (P) 120 KG/hr, (R) = 230 kg/hr, (A) 6580 kg/hr

The flow of fluid includes movement of an unbalanced fluid. As long as unequalled forces are in…

Q2// It is required to produce a granulated product (P) from the feed material (F) by the process shown in the block diagram (all percentages are given in wt. %). Calculate the flow rates of all streams in the process.

Q2// It is required to produce a granulated product (P) from the feed material (F) by the process shown in the block diagram (all percentages are given in wt. %). Calculate the flow rates of all streams in the process.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Three cylinders are piled in a rectangular ditch as shown in the Figure 2 neglecting friction. Wa=…

Q: 70,000 litres of water per day, if the water contains the following impurities: Example 9.33.…

Q: 9. A core sample is saturated with Oil, Gas and Water , the initial weight of the saturated sample…

A: Given data - bulk volume of sample = 100 cc Initial weight of saturated sample is 220 gm Increased…

Q: The specific gravities of solids and carrier fluids of a slurry are usually known, but the specific…

A: Specific gravity is defined as the ratio of the density of solids in the slurry and the density of…

Q: The analysis of a water sample for MPN calculation in Multiple Tube Fermentation Test is given…

A: Given: Multiple tube fermentation test is given below,

Q: A high-rate digester is being operated at a constant temperature of 100°F. The sludge loading rate…

A: Given data- High-rate digester- Temperature = 100oF, Sludge loading rate SLR=396 m3/d, To Find- The…

Q: A liquid flow through pipes 1 and 2 with the same flow velocity. If the ratio of their pipe…

Q: A 50 ml sample of industrial wastewater is taken into a silica crucible. The empty weight of the…

A: Given, quantity of sample taken = 50 ml =50x 10-3L empty weight of the crucible =54.352 g dry weight…

Q: 1. The solids content of a stream water sample is to be determned. The total solids content is…

A: Mass of empty dish = W1 = 50.326 gm Mass of dish + sample = W2 = 118.400 gm Mass of dish and dried…

Q: In constructing dams, the concrete is poured in lifts of approximately 1.8 m (y₁ = 1.8 m). The forms…

A: y1=1.8 mAssume that the moment will occur at the base be: MMoment = Force Distance

Q: 100-mL water sample is mixed with 200 mL of deionized water for BOD analysis. The DO of the mixture…

Q: A liquid flow through pipes 1 and 2 with the same flow velocity. If the ratio of their pipe…

Q: Solids analyses were conducted on a soybean processing wastewater. 50 ml of wastewater is used for…

A: Given, Volume of sample (V)=50 mL for total solid analysis Volume of sample (V-)=100 mL for…

Q: What is the volume flow rate of oil in gallons per minute

Q: Water containing 50 mg/L of monodisperse (uniformly sized) spherical particles of diameter 100 μm…

Q: A Laboratory scale treatability study was done to determine kinetic constants with results shown in…

A: The maximum specific growth rate (µm) is a measure of the growth potential of microorganisms under…

Q: A tank has a total capacity of 100L, but initially it contains 15L of pure water. Water flows into…

Q: Determine the pH of a solution that contains 2*(10^-4) mg/L of OH- (at 25 degrees)

Q: TBP Distillation statistics for a petroleum cut are as follows: Distillate volume percentage 10 30…

Q: An oil of sp. gr. 0.9 is contained in a vessel. At a point the height of oil is 40 m. Find the…

A: Specific gravity of oil = 0.9Height of oil = 40 mCorresponding height of water =?

Q: 6 Ydu will obtain 2.0 L of tap water for you water hardness test. The water hardness test uses a…

A: We will solve this question in step no. 2

Q: 2. Given: Process tank shown below Find: (1) total surface area and (2) volume 3m3 m- 6m 4 m

A: Consider the given tank which has two shape i.e. cube and cone a=side of square =6 mh=height of…

Q: In wastewater treatment the digestion of sludge produces a useful gas (carbon dioxide and methane),…

A: Discharge is the main quantity in any sector that is used to transfer fluid from one place to…

Q: Solve this question step by step

A: Step 1: Step 2: Step 3: Step 4:

Q: An impellar blade unit operates at 50 rpm. Determine the degree of mixing? Also if the blade…

Q: (d) Biomass and substrate mass balance equations can be merged giving QwXR = () Y/Qo` X VX (SS) - ka…

A: Given:- SRT=20days HRT=20H So=350mg/l S=100mg/l Y=0.15 Kd=0.22per day Calculate :- 1) prove Given…

Q: The tank shown below contains 80 lbs of salt dissolved in 500 gal of water. The inflow per minute is…

Q: vides water for 16000 people with average consumption of 160 L/person/day, retention time in rapid…

A: Given data Power input(P) = 0.5 KW = 500 W Population = 16000 Water demand = 160L/Person/day…

Q: (b) Fill the Principal SI Unit as shown in Table Q1. Table Q1 Unit Meter per second square Quantity…

Q: Three cylinders are piled in a rectangular ditch as shown in the Figure 2 neglecting friction. Wa=…

Q: total solidification time

A: Volume: V=(14+8)2x4x10V=440 cm3

Q: h=1.4, w =3,L= 4.7 alumium block / brass block h=1.4, w =1.7l=2.4 densities (p alumiun 2700kg/m3…

Q: Q57: In Figure below, calculate Fx and Fv per unit width of the cylinder cylinder Water

A: assume the width of the the curved surface is unit (i.e.=1 m). force in the horizontal direction is…

Q: mple of the crucible is 54.352 g. The crucible with the sample is dried in a hot a 104°C till a…

A: Volume of sample= 50 * 10-3 L Weight of crucible with the residue sample after drying at 104°C =…

Q: 2 A flotation plant treats 5,000 tonnes of ore per hour on a dry basis. For optimum flotation…

A: Given, Flow rate of ore = 5000 mtph Density=2.75 t/m3 Volume of each cell=100 m3 Time= 40 min

Q: Estimate the concentration of SOz in the urban air above city, if tthe mixing height above the city…

A: Given, Mixing height= h= 800 m Width of box perpendicular to the wind = w= 12000 m Average annual…

Q: Water, m=80.17 g, is mixed with 162.74 g of unknown fluid with specific weight of 0.259 kip/ft^3.…

Q: Calculate the THOD of a 300 mg/L solution of C5H8O2N.

A: To Find :- ThOD of a 300 mg/L solution of C5H8O2N

Q: 1-6. In a biological waste treatment system, solids may enter in the influent, be created or…

A: Waste management decreases the impact of waste on the climate, wellbeing, etc. It can likewise help…

Q: 6. The result of a mechanical sieving are as follows. Mass Retained (grams) 4.50 12.50 Sieve size…

Concept explainers

Integrated Solid Waste Management

Integrated Solid Waste Management (ISWM) is a thorough waste suppression, compost, removal and recycling Program. An effective ISWM system considers how to suppress, manage and recycle solid waste in a manner that is most efficiently to protect human health and the surrounding. ISWM system requires evaluation of public wants and demands and then selecting and merging the most effective waste management activities for the proposed demands. The main ISWM activities for solid waste management are Waste prevention, Recycling and Composting, and Combustion and Removal and waste collection in a properly planned, constructed, managed and mitigated landfill areas. Each of these requires careful designing, financing, accumulation, and delivery of activities.

Question

100%

Q2// It is required to produce a granulated product (P) from the feed material (F) by the
process shown in the block diagram (all percentages are given in wt. %). Calculate the flow
rates of all streams in the process.
Recycle (R)
Outlet air (A)
10 % Water
6% water
94 % air
90 % Solid
(T)
(G)
Product (P)
Granulator
Dryer
Divider
50 % Water
Feed (F) = 400 kg/hr
50 % Solid
%3D
Inlet air (A)
73 % Water
2% water
27 % Solid
98 % air
Ans. (P) 120 KG/hr, (R) = 230 kg/hr, (A) 6580 kg/hr

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Step by step

Solved in 5 steps with 12 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

I need the answer as soon as possible
Using a mass balance, derive a design equation (concentration as a function of time) for a batch system with second order reaction kinetics (r = -kC2). If the units of concentration and time are mol/L and s, what are the units of k?
Fluid Mechanics (question 5)in the solution can you provide the conversion/s (if neccessary to the question) so I could understand how to solve it better
USING FOL Differential Equation APPLICATION SOLVE THE FOLLOWING PROBELM AND SHOW COMPLETE SOLUTION AND FINAL ANSWER.In a tank of 100 liters of brine containing 50 kg total dissolved salt. Pure water is allowedto run into the tank at the rate of 3 liters a minute. Brine runs out of the tank at the rateof 2 liters a minute. The instantaneous concentration in the tank is kept uniform bystirring. How much salt is in the tank at the end of 1hour?
A 50 ml sample of industrial wastewater is taken into a silica crucible. The empty weight of the crucible is 54.352 g. The crucible with the sample is dried in a hot air oven at 104°C till a constant weight of 55.129 g. Thereafter, the crucible with the dried sample is fired at 600°C for 1 h in a muffle furnace, and the weight of the crucible along with residue is determined as 54.783 g. The concentration of total volatile solids is
Glycerin flows at 35 m through a 150 mm diameter new wrought iron pipe at a velocity of 3 m/s. It has an absolute viscosity of 1.50 Pa-s and a specific gravity of glycerin = 1.26. 2. What is the type of flow?
A river water was taken for analysis. The results for anions and cations analysis are shown below, 165 mg/l 70 mg/l HCO, 2+ Ca Са 173 mg/l 30 mg/1 SO42 2+ Mg 202 mg/l 125 mg/l ci Na Determine and justify either the analysis is acceptable or not. II II II
We have a quadrant tank as given in the first picture. Breadth (B) : 75 mm Inner Radius (R1) : 100 mm Outer Radius (R2) : 200 mm Moment Arm (R3) : 200 mm weight for case1 : 65gr weight for case2: 420gr question is given in the second picture.
Problem 2: Engineers sometimes use pipes as reactors in treatment plants. Suppose that the plant flow is 3.3ft3/s (about 2.1 million gallons per day, mgd) and a cylindrical pipe is to be used for disinfection.A. Draw a sketch of the system. Indicate the control volume by a dashed line. What kind of hydrodynamicmodel should you use for a pipe? What mixing conditions should you assume?B. Write the integrated mass balance equation for the pollutant in symbols at steady state. (“Integrated” meansthat your mass balance looks like: C = …) Define your symbols.C. For a pipe 3.5 feet in diameter and 50 feet long, what is the hydraulic residence time in minutes?D. For the pipe in Part C, what value of the first-order rate constant (in min–1) is needed to achieve a 99% removal of bacteria?
5p In the figure, the pipe losses are one and a half times the velocity head at point 2 (1.5v^2/2g.) What is the value of v2? In the figure, the pipe losses are one and a half times the velocity head at point 2 (1.5v₂/2g.) What is the value of v₂? Air: 20 lb /in2 gage Gasoline = 0.68 D = 2 in Water O 76.39 ft/s 37.25 ft/s O 50.7 ft/s 30.5 ft/s 5 ft Fig. 8-66