Q2/ A steel rod of (20mm) diameter passescentrally through a tight fitting copper tubeof external diameter of (40mm).The tube isclosed with rigid covers and subjected tocompressive force of (50kN) as shown infigure. Determine the total stress in the rodand tube when temperature reduced by(50C°).Est-200GPa, Ecu=100GPa,asr 11.7*106 1/°C, and acu-18*10% 1/°C30 kNSteel rodCopper tube30050 KNAll dimensions in mm20 40

The compressive force is The decrease in temperature is .The properties for steel and copper are

Q2/ A steel rod of (20mm) diameter passes centrally through a tight fitting copper tube of external diameter of (40mm).The tube is closed with rigid covers and subjected to compressive force of (50kN) as shown in 50 kv. figure. Determine the total stress in the rod and tube when temperature reduced by (50C°). Est 200GPa, Ecu-=100GPa, Osr-11.7*106 1/°C, and acu-18*10 1/°C Steel rod Copper tube 300 50 EN All dimensions in mm 20 40

Q2/ A steel rod of (20mm) diameter passes centrally through a tight fitting copper tube of external diameter of (40mm).The tube is closed with rigid covers and subjected to compressive force of (50kN) as shown in 50 kv. figure. Determine the total stress in the rod and tube when temperature reduced by (50C°). Est 200GPa, Ecu-=100GPa, Osr-11.7106 1/°C, and acu-1810 1/°C Steel rod Copper tube 300 50 EN All dimensions in mm 20 40

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

32 HiW find longitudinal and hoop tensile stresses in the Wall of vessel Shown in figure, if the internal Bessure is 0.9 Ma and thickness of Wall is 6.4mm? Ansi Ğ =42.19 MYa + H= 62.8 MYa Aiso find I? so.67 0.6m L=18m 0.6m
A column is fabricated by adhesively bonding two aluminum faceplates to a foam plastic core as shown below. Note that there are only left and right aluminum plates (with no front and back plates). The foam plastic core has a square cross-section with elastic modulus Ef 1110 MPa. Determine the stress in the aluminum plates, the stress in the foam core, and the displacement of the column under the action of the applied force. = Note: Express tensile stresses as positive (+) and compressive stresses as negative (-). Given: • L1 L2 = = 100 mm = 1.7 m • . L3 = = 1.4 mm RIGID PLATE ALUMINUM FACE PLATE F FOAM L2 |← 41 +| |—–—– 63 L1 L3 F = 37 kN σα = σ f = |ɗ| = = number (rtol=0.01, atol=1e-05) number (rtol=0.01, atol=1e-05) number (rtol=0.01, atol=1e-05) MPa ? MPa mm ?
Coefficient of expansion αB= 165.10^-7 1/ 0C , solid copper bar diameter 20 mm , It is placed in a steel pipe with an outer diameter of 30 mm with an inner diameter of 2 mm larger than this bar and an expansion coefficient αÇ = 125.10^-7 1 / 0C, and is joined by a rigid plate from the top so that they move together. Find the stresses that will occur in steel and copper when the system is heated with a temperature difference of Δt = 80 0C. (EÇ = 200 GPa, EB = 100 GPa)
Answers (a) er=15.30-250.2/r^2 , etheta=15.30+250.2/r^2 (b) delta c = 8.12x10^-4 in
Please don't provide handwritten solution .....
ANSWER ASAAAAP PLS
Find the stresses in each direction, also find the change in volume of the block of dimension 120 mm x 60 mm x 43 mm, subjected to 3 mutually perpendicular loads. The load along length, breadth and depth directions are 10 kN (tensile), 25 kN (tensile), 13 kN (compressive) respectively, Take E as 180 GPa, Poisson's ratio as 0.3. The stress along length direction (Unit in kN/m2)= _____________ The stress along width direction (Unit in kN/m2)= _____________ The compressive stress along depth direction (Unit in kN/m2)= _____________ The change in volume of the block is (unit in mm3) = ______________
OP= 314 N Let's consider a rod having a solid circular cross-section with diameter of 4 mm and it is made of a material having a Young's modulus E = 120 Gpa and a Poisson's ratio of 0.33. If a tensile force F is subjected to that rod cross-section, the diameter becomes 3.998 mm, determine the applied force F. Select one: O F= 2285 N O F=7140 N. O F=3427 N OF=5712N OF= 2856 N O F=8568 N Finick a al TO 4
O Solve two problems on statically indeterminate structures(strain energy method), two on thin wall pressure vessels(1-sphere and 2-cylinder), and one on thick wall cylinder, given below. A steel cylinder is 160 mm ID and 320 mm OD. If it is subject to an internal pressure of 150 MPa, determine the radial and tangential stress. Determine the maximum shear stress in the cylinder. Assume it has closed ends.
ru 8 бу enüz vaplanmadı Ot D0 uzerinden retlenmiş Txy Soruyu retle Tnt Ox On (a) (b) On the surface of a structural member, stresses are given as ox=61 MPa, oy=32,7 MPa and Txy=-28,1 as shown in figure (a). Determine the minimum principal stress (MPa). Note: If the stress is compressive, use - sign. Yanıt:
need help asap :<
Q4 / A thick cylinder of (200mm) external diameter and (100mm) internal diameter, the internal pressure of (90MPa) applied only, Determine:- 1- Stresses that developed on outer and inner surfaces of cylinder. 2- Strains at the outer and inner surface of cylinder. E-210GPa, v=0.3