Q2) A Separately excited DC Generator has 300 armature conductors; total flux is 0.12 Web, current flowing in an armature conductor is 10 A, terminal voltage is 80 V, voltage regulation at rated load is 12.5% and the machine rotates at speed of 600 RPM. Calculate armature resistance, armature current, armature induced voltage, armature developed power.

Q2) A Separately excited DC Generator has 300 armature conductors; total flux is 0.12 Web, current flowing in an armature conductor is 10 A, terminal voltage is 80 V, voltage regulation at rated load is 12.5% and the machine rotates at speed of 600 RPM. Calculate armature resistance, armature current, armature induced voltage, armature developed power.

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A four-pole, lap-would DC machine has 462 conductors in the armature. The average flux per pole is 0.02 Wb. Determine the induced armature voltage when the armature rotates at 1000 rpm.
A 4 pole, dc shunt generator an armature resistance of 0.06 ohm and shunt field resistance of 60 ohms hast 150 duplex wave-connected conductors in its armature. The flux per pole is 0.09 Wb. If the terminal voltage is 300V and driven at 1500 rpm, what is the power absorbed by the load.
Q2) A 6 pole, wave wound DC shunt generator has a useful total flux of 420 mWb. The armature winding consists of 220 turns each of 0.004 Q resistance, when running at 900 RPM the armature current is 50 A. If the armature winding reconnected as lap calculate the terminal voltage in case of wave and lap given that the field circuit and the speed are kept same.
An 8-pole dc generator has 500 armature conductors, and useful flux of 0.05 Wb perpole. What will be the emf generated if it is lap connected and runs at 1200 rpm? Whatmust be the speed at which it is to be driven to produce the same emf if it is waveconnected and the flux is reduced to 80% of its value when lap connected?
B3. A 6 pole DC shunt generator with a shunt field resistance of 116 ohms and an armature resistance of 1.5 ohms has 264 wave connected conductors in its armature. The flux per pole is 0.01 Wb. If load resistance of 21 ohms is connected across the armature terminals and the generator is driven at 835 rpm find The terminal voltage is = The power absorbed by the load is =
Type your question here Q1// Answer the following question. 1- A 8-pole a separately excited generator, having the wave-wound armature winding has 16 slots, when running at 600 r.p.m. has a terminal voltage of 400 V and an induced voltage of 414.72 V. The armature resistance is 0.12, the flux per pole is 36 mWb, and there is a brush contact voltage drop of 1V at each brush. Calculate the value of armature current and the number of conductors for each slot. 2- A six-pole, DC shunt generator is wave-connected, supplies a load of A 12 kW, 240 V and an induced voltage of 250 V. If this machine is now lap-connected and flux per pole increasing by 20%, all other things remaining the same, calculate the e.m.f generated and load current.
Q2/ a- Explain how to control the terminal voltage of a separately exited DC generator and that for DC shunt generator? b- The armature of an 8 poles DC shunt generator is wave-connected and generates 216 v when running at 750 rpm. The armature has 144 slots, with 4 conductors per slots. If this armature is removed, replaced with lap- wound, find the generated e.m.f with the same flux per pole but running at 600 rpm.
One free with 8 pole number The armature radius of the excited DA machine is 20 cm and The ectin length of the armature is 30 cm. Poles arcade It covers 85% of its surface. Armature coils with 8 windings It consists of 36 coils. Windings double parallel winding has. Idle operation when armature is rotated at 1000 rpm terminal (Va) voltage is measured as 230 V. This according to the average magnetic flux below the poles what is the value of its density?
The armature of a 12 pole DC shunt generator has 50 slots and is wave wound with 12 conductors per slots. The generator is running at a speed of 625 rpm and supplies a resistive load of 15 ohms at a terminal voltage of 300V. The armature resistance is 0.5 ohms and field resistance is 60 ohms. Find the armature current, the generated EMF and the flux per pole.
(i) B2 (ii) The armature of a 14 pole DC shunt generator has 60 slots and is lap wound with 13 conductors per slots. The generator is running at a speed of 630 rpm and supplies a resistive load of 16 ohms at a terminal voltage of 310V. The armature resistance is 0.5 ohms and field resistance is 60 ohms. Find the armature current, the generated EMF and the flux per pole.
A 900 rpm, 4 pole wave wound shunt motor takes 300 A. The flux per pole is 0.02 Wb and the armature has 1500 conductors. The shunt field takes 4 A of current. Solve for power developed in the armature (W).
ö 16 A 2-pole d.c. shunt generator has a useful flux per pole of 0.03 Wb. The armature winding consist of 200 turns, each of 0.005 Q resistance. Calculate the terminal voltage when running at 1200 r.p.m. if the .armature current is 40A