Q1 (c) In a Marshall test, the percentage of asphalt binder by total weight of aggregate is 5.26%. The bulk specific gravity of aggregate (Gsb) = 2.455, the specific gravity of asphalt binder (Gb) = 1.020, and the density of water (yw) = 1.000 g/cm^3. If 1 m^3 of an asphalt concrete mixture will be produce that having 2000 g and the asphalt absorbed into the aggregate is 24 gram : (i) Calculate asphalt content, effective asphalt content and asphalt absorption. (ii) Calculate void in mineral aggregate and void filled with asphalt.

Q1 (c) In a Marshall test, the percentage of asphalt binder by total weight of aggregate is 5.26%. The bulk specific gravity of aggregate (Gsb) = 2.455, the specific gravity of asphalt binder (Gb) = 1.020, and the density of water (yw) = 1.000 g/cm^3. If 1 m^3 of an asphalt concrete mixture will be produce that having 2000 g and the asphalt absorbed into the aggregate is 24 gram : (i) Calculate asphalt content, effective asphalt content and asphalt absorption. (ii) Calculate void in mineral aggregate and void filled with asphalt.

Traffic and Highway Engineering

5th Edition

ISBN:9781305156241

Author:Garber, Nicholas J.

Publisher:Garber, Nicholas J.

Chapter18: Bituminous Materials

Section: Chapter Questions

Problem 12P

See similar textbooks

Similar questions

In a Marshall test, the percentage of asphalt binder by total weight of aggregate is 5.0%. The bulk specifc gravity of aggregate (G3)=2.624, the specifc gravity of asphalt binder (G)=1.000, and the density of water (Y)=1.000 g/cm³. If the absorbed asphalt (Pa) is 2.00% by total weight of aggregate, and the voids in total mixture (VTM) is 4.0%, determine the following properties: a. The effective asphalt content (Pbe) b. The bulk specifc gravity of the compacted mixture (Gmb) c. The voids in mineral aggregate (VMA) d. The theoretical maximum specifc gravity of the loose mixture (Gmm) e. The voids flled with asphalt (VFA) f. The effective specifc gravity of aggregate solids (G)
An aggregate blend for an asphalt concrete mixture has the following composition by weight: Coarse aggregate Fine aggregate 65% Specific (bulk) gravity of coarse agg. 35% Specific (bulk) gravity of fine agg. = 2.70 = 2.65 This aggregate blend was mixed with asphalt cement (G, =1.03) at an asphalt content of 5.5% by weight of mixture (ignore absorbed asphalt). A volumetric analysis was conducted and it was determined that the %VMA for the mix was 15.5%. Determine Gmb Of the mixture.
An asphalt concrete specimen has the following properties: • Asphalt content = 5.5% by total %3D weight of mix • Bulk specific gravity of the mix = 2.475 • Theoretical maximum specific of gravity = 2.563 • Bulk specific gravity aggregate = %3D 2.689 Ignoring absorption, compute the percent VFA Select one: A. 67.2% B. 68.1% C. 76.3% D. 73.8%
Use the following volumetric relationships for asphalt mix analysis: VTM = 100 (1 - Gmb) VFA = 100 3. An asphalt concrete specimen has the following properties: Asphalt content = 5.5 % by total weigh of mix Bulk specific gravity of the mix = 2.475 Theoretical maximum specific gravity = 2.563 Bulk specific gravity of aggregate = 2.689 Assuming there is no absorption of binder, calculate the following: (a) Percent Voids in Total Mix (b) Percent Voids in Mineral Aggregate: VMA – VTM VMA (c) Percent Voids filled with asphalt: VMA = = (100 - Gmb Ps Gsb
An aggregate blend is composed of 65% coarse aggregate by weight (SG 2.65), 30% fine aggregate (SG 2.70), and 5% filler (SG 2.75). The compacted specimen contains 6% asphalt binder (SG 105) by weight of total mix, and has a bulk densit of 2.255 Mg/m&3. Ignoring absorption.a. What is the percent voids fill with asphalt?b. What is the percent voids in mineral aggregates?c. What is the percent voids in total mix?
As part of mix design, a laboratory-compacted cylindrical asphalt specimenis weighed for determination of bulk-specific gravity. The following numbersare obtained:Dry mass in air = 1264.7 gramsMass when submerged in water = 723.9 gMass of saturated surface dry (SSD) = 1271.9 ga. What is the bulk-specific gravity of the compacted specimen (Gmb)?b. If the maximum theoretical specific gravity of the specimen (Gmm) is2.531, what would be the air void content of the specimen in percent?
Q1A In a Marshall test, the percentage of asphalt binder by total weight of aggregate is 5.3%. The bulk specifc gravity of aggregate (G)-2.582, the specifc gravity of asphalt binder (G)=1.000, and the density of water 3 (Yw)=1.000 g/cm. If the voids flled with asphalt (VFA) is 70.0% and the effective asphalt binder (Pbe) is 4.0% by total weight of mixture, determine the following properties: a. The absorbed asphalt binder (Pba) b. The bulk specifc gravity of the compacted mixture (Gmb) c. The voids in mineral aggregate (VMA) d. The voids in total mixture (VTM) e. The theoretical maximum specifc gravity of the loose mixture (Gmm) The effective specifc gravity of the aggregate (Gse) ال
3. As part of mix design, a laboratory-compacted cylindrical asphalt specimen is weighed for determination of bulk specific gravity. The following numbers are obtained: Dry Mass in air = 1264.7 grams • Mass when submerged in water = 723.9 grams • Mass of Saturated Surface Dry (SSD) = 1271.9 grams %3D a.What is the bulk specific gravity of the compacted specimen (Gmb)? b.lf the maximum theoretical specific gravity of the specimen (Gmm) is 2.531, what would be the air void content of the specimen in percent? c. If the bulk specific gravity of aggregates is 2.675 and asphalt content is 5.5%, what is the voids in mineral aggregate and voids filled with asphalt in percent? Ignore absorption.
As part of mix design, a laboratory-compacted cylindrical asphalt specimen is weighed for determination of bulk-specific gravity. The following numbers are obtained:Dry mass in air = 1264.7 gramsMass when submerged in water = 723.9 gMass of saturated surface dry (SSD) = 1271.9 ga. What is the bulk-specific gravity of the compacted specimen (Gmb)?b. If the maximum theoretical specific gravity of the specimen (Gmm) is 2.531, what would be the air void content of the specimen in percent?
Q2) The following results were obtained from testing a certain asphalt binder: RTFO aged PAV Original Asphalt aged asphalt asphalt DSR G° (kPa) 8 (C) 0.98 2.1 6000 75 70 60 BBR S@ 60-sec (MPa) | 300 M@ 60-sec 450 650 0.6 0.5 0.4 DTT Failure Strain (%) 2.5 % 2 % 1.2% Determine if the asphalt meets the Superpave specification requirements to resist the following distresses: (a) Rutting (b) Fatigue cracking (c) Low temperature cracking
Q4) Determine the PG grade of the asphalt whose results are shown in the table below? Show all calculations and comparisons with Superpave requirements. Test Results Original Properties Flash point temperature, °C 278 Viscosity @ 135 °C 0.490 Pa.s Dynamic shear Rheometer @ 82 °C @ 76 °C G* = 0.82 kPa, 8 = 68° G* = 1.00 kPa, 8 = 64° @ 70 °C G* = 1.80 kPa, 8 = 60° Rolling Thin Film Oven Aged Binder Mass loss, % 0.63 Dynamic shear Rheometer @ 82 °C @ 76 °C G* = 1.60 kPa, 8 = 65° G* = 2.20 kPa, ô = 62° @ 70 °C G* = 3.50 kPa, 8 = 58° Rolling Thin Film Oven and PAV Aged Binder Dynamic shear Rheometer @ 34 °C @ 31 °C @ 28 °C G* = 2500 kPa, 8 = 60° G* = 3700 kPa, 8 = 58° G* = 4850 kPa, 8 = 56° Bending Beam Rheometer @ -6 °C, 60-sec @ -12 °C, 60-sec @ -18 °C, 60-sec S = 255 MPa, m = 0.329 S = 290 MPa, m = 0.305 S = 318 MPa, m = 0.277
Given the following information from an asphalt mix: Gsb = 2.705 Gmm = 2.534 Gmb = 2.432 Gb = 1.014 Pb = 5.7% Unit weight of water = 62.4 Ib/ft3 Assume 1 ft for total volume. Draw mass/volume relationship and determine Mass of Mix (Mm) Ib., Mass of Binder (Mb) Ib., Volume of Binder (Vb) pcf, Volume of Void-less Mix (Vmm) Volume of Air (Va) pcf, Volume of Absorbed Asphalt (Vba) pcf, Volume of Effective Asphalt (Vbe) pcf. In addition, calculate Air Voids (VA) %, Voids in Mineral Aggregate (VMA) %, and Voids Filled with Asphalt (VFA)