Q (5-2)/ Water flows uniformly in an earth rectangular cross section open channel. Data available are: Bed width of the channel B= 20 y (m), longitudinal slope of bed level of the channel S. 0.0001, n =0.017 {s/m(13)) and water flow rate Q=150 (m³/s). = Calculate values of the followings: 1- Bed width of the channel B. 2- Water flow depth in the channel y. 3- Fruid Number Fr. 1911 (m/s), Fr= 0.2 less than 1. Flow is sub-critical (slow flow). (m) 0000010001001-3 narts oilt to yomiq banW.9 +4=¹(3+1)+8 (m) 24.5 ANSWER/ A=0.05B², P= 1.1 B, B = 53.42 (m), y = 2.67 (m), A = 142 (m²), v = 1.05 JUMPS 01400021 Cas ONSDOIR

Q (5-2)/ Water flows uniformly in an earth rectangular cross section open channel. Data available are: Bed width of the channel B= 20 y (m), longitudinal slope of bed level of the channel S. 0.0001, n =0.017 {s/m(13)) and water flow rate Q=150 (m³/s). = Calculate values of the followings: 1- Bed width of the channel B. 2- Water flow depth in the channel y. 3- Fruid Number Fr. 1911 (m/s), Fr= 0.2 less than 1. Flow is sub-critical (slow flow). (m) 0000010001001-3 narts oilt to yomiq banW.9 +4=¹(3+1)+8 (m) 24.5 ANSWER/ A=0.05B², P= 1.1 B, B = 53.42 (m), y = 2.67 (m), A = 142 (m²), v = 1.05 JUMPS 01400021 Cas ONSDOIR

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Q (5-7)/ Water flows uniformly in an earth rectangular cross section open. channel. Data available are: wasa.t €18.8 Longitudinal slope of bed level of the channel S, = 0.0004, n = wal aid sell 0.01 {s/m(13)), water flow rate Q=800 (m³/s) and B= 200 (m)..d =X Calculate values of the followings: 858 ETB)(-10) - CI8.8) - Water flow depth y and water flow velocity v in the channel.
Q (5-5)/ Water flows uniformly in an earth rectangular cross section open channel. Data available are: ad aspo an to zns lanoituga teoro n maiedve a) o Longitudinal slope of bed level of the channel S.= 0.0001, n = 0.025 {s/m(13)) and water flow rate Q=320 (m³/s), A = 200 (m²) and P = 100 MOON (m). Use the relation, B = 2y. tan (8/2). V/H) 0100,0 my) 200.0-n toisifices agains LEWIZZA Calculate values of the followings: y, B and v in the channel. ANSWER/ y = 4 (m), B=8 (m) and v= 1.6 (m/s). (mm) 3--0-A
For #5-7, assume there is a creek with a width of 4.6 m, depth of 23 cm, slope of 0.001 m/m, and discharge of 0.13 m³/s. 5. Assuming a rectangular cross section, what is the hydraulic radius of the creek to the nearest cm? 6. What is the average flow velocity to the nearest cm/s? 7. And what is the channel's Manning's roughness coefficient (using SI units) to the nearest hundredth?
Q (5-4) / Water flows uniformly in an earth trapezoidal cross section open channel. Data available are: Bed width of the channel B = 10 (m), water flow depth y = 5 (m), longitudinal slope of bed level of the channel S, = 0.0001, n = 0.025 {s/m(1/3)}, water flow rate Q=150 (m³/s), A=75 (m²) and P= 100 (m) and W = 2B. 1- Calculate values of the followings: Q, Z and Fr. 2- Mention Type of flow in the channel.
Manning's equation is Q = where Cm AR 2/3 1/2 n Q = Cm = = flow (m³/s) 1.49 USC system 1.00 SI system roughness factor for various boundary conditions area (m2) hydraulic radius (m) n = A = R == = S = slope of EGL (or HGL for steady uniform flow conditions) m/m area/wetted perimeter Transform the above equation to solve for pipe diameter (mm) expressed in terms of flow (L/s), pipe slope (%) and pipe roughness "n". The value of Cm 1s 1.00 for a metric equation. Express your answer in the simplest form mathematically. Check by assuming arbitrary values and comparing the results between the original equation and the transformed equation.
OTO 'T (1 Hydrology • Flood Routing . HW • Q1// • The inflow and outflow hydrograph for a river reach are as shown in columns 2 and 3 of the Table. Determine K and x for the reach. Assume x = 0.1,0.2, 0.3 ||| = t + فلاتر O Inflow Time (hr) (cms) 0 12 24 36 48 60 72 84 96 108 120 132 400 144 156 168 Outflow (cms) 0 A.BREEEEEEE. 14.5. 28.4 31.8 29.7 25.3 16.3 12.6 a 2 7 11.7 16.5 24 29.1 28.4 23.8 19.4 15.3 11.2 82 6.4 5.2 إضافة شرح... × mum
Assignment1. Derive from first principle the chezy equation for uniform flow.2. A channel 5m wide at the top and 2m deep has sides sloping 2 vertically in 1 horizontally. The slope of the channel is 1 in 1000. Find the volume rate of flow when the depth of water is constant at 1m. Take c = 53 in si units. What will be the depth of water if the flow were to be doubled? [ q = 4.79m3/s, h = 1.6m]3. A trapezoidal channel is to be designed to carry 280m3/minute of water. Determine the cross – sectional dimensions of the channel if the slope is 1 in 1600, side slopes 45oand the cross – section is to be a minimum, take c = 50 in si units. [h = 1.53m, b = 1.27m]4. A 2.0m diameter concrete pipe on a slope of 0.005 is to carry water at a normal depth of 1.5m. Determine the flow velocity and flow rate. Take n=0.014. Also determine q when ho=0.75 and h=1.0m5. Prove that the best hydraulic section for a rectangular channel 6. Determine the best section for a semi-circular cross section.7. Find the…
ktop/New%20folder/Hydraulics/HYDRAULICS.pdf +の EXAMPLE 1: Determine the normal discharge for the channel shown in Fig 2.7a. The water surface in the left flood plain is 42m wide and that in the right flood plain is 26m. The manning roughness value for the flood plain is 0.10, while the Manning roughness value for the channel is 0.05 for the channel. The longitudinal slope of the channel is 0.0005. Solution: n-0,10 n-0,05 n;-0,10 2m 2m 5m 5m 112m 30m 15m 16m 10m 12m 12m Fig 2.7 a 5:16 PM 6 18 2021
A trapezoidal channel with the dimensions shown in the figure below is laid on a slope of 0.003 ft/ft. The Manning's n value for the channel is 0.034, and the rate of flow through the channel is 866 cfs. Calculate and plot the water surface profile from the point where the channel ends (assume a free outfall) to the point where y is less than or equal to 0.9 yn. ملة 1.5 B 20' 1.5
Q2/Béd width of an open channel is B = 40 (m), depth of water in the channel is y = 2 (m), longitudinal bed level slope is So = 0.001 and Manning's coefficient is n= 0.025 { m(l)/s}. Calculate the value of water flow rate in the channel. Find the Type of flow in the channel.
When the channel of triangular cross section shown in below was new, a flowrate of Q caused the water to reach up the side as indicated. After considerable use, the walls of the channel became rougher and the Manning coefficient, n, doubled. Determine the new value of L if the flowrate stayed the same.
1 2 3 4 6 6 6 6 7 6 9 Dimensions in the figure are in meters. With the given dimensions and Manning coefficients, determine the channel's flow rate and the channel's effective Manning coefficient. Water is flowing on a channel whose bottom slope is 0.002. The cross-section of the channel is shown in the figure. The channel has an unfinished cement surface (n = 0.014) at subsections 1 and 2 and a light brush (n = 0.05) at subsection 3. 9