Propane is flowing in a 2 inch Schedule 40 steel pipe with a volume flow rate of 1.0 gpm. Compute the pressure difference between two points 500 feet apart.  The pipe is horizontal.  Report your result in WC.

Select the proper-sized steel tube for a flow rate of 20 gpm and an operating pressure of 1.000 psi. The maximum recommended velocity is 20 ft/s and the factor of safety is 8. a) Material is SAE 1010 with a tensile strength of 55,000 psi b) Material is AISI 4130 with a tensile strength of 75,000 psi Show your work, and explain why you chose your option.

An open tank contains 1.2m of oil (SG = 0.8), 1.5m of water, and 420mm of mercury (SG = 13.6). Determine the pressure at the bottom of the tank. (A) No Answer among the choices B 66.85 KPa © 71.38 KPa D) 87.52 KPa E) 80.17 KPa

A plate 0.05mm distant from a fixed plate moves at 1.2m/sec and requires a fore of 2.2 N/m² to maintain this speed. Find the viscosity of the fluid between theplates. 1& Dr. Ahmed Raho

water enters a horizontal nozzly with diameter 60 mm at 6 m/s and exits to the atmosphere through a 40 mm diameter outlet. find the pressure at the entrance of the nozzle ? Please urgenttttttttt

The flow in a pressurized pipe is laminar. Kinematic viscosity coefficient of the fluid is 10-6m²/s, pipe diameter 0.5m, maximum cross-sectional velocity 0.0032m/s. According to these conditions, which option is the friction velocity? A. 0.00008m/s OB. 0.00016m/s OC. 0.00032m/s Seçimi Sıfırla

7-40. SAE 30 oil at 68°F flows through the piping system shown in Figure 7.38. (a) If Q₂ = 20 gpm, what is the largest allowable value of 2; so that the flow in inlet pipe 1 is laminar? (b) For the calculated value of Q₁, determine whether the flow is laminar or turbulent in pipes 2 and 3. Globe valve 1 in. dia. 1.25 in. dia. 1.25 in. dia. Pipe 4 21 Pipe 1 f Pipe 2 Pipe 3 Globe valve 3/4 in. dia. Figure 7.38 System for Exercises 7-40 and 7-41. 24

Include a free body diagram The water level in a tank is 34 ft above the ground. A hose is connected to the bottom of the tank at the ground level and the nozzle at the end of the hose is pointed straight up. The tank cover is airtight, but the pressure over the water surface is unkown. Determine the minimum tank air pressure (gage) that will cause a water stream from the nozzle to rise 72 ft from the ground.A. 13.5 psiB. 15.5 psiC. 16.5 psiD. 14.4 psi

I need the correct answer and as soon as possible please

T2-2 - I want to answer this question. Thanks