Pressure (kN/m²)27 54 107 214 429 214 107 54 Void ratio1.243 1.217 1.144 1.068 0.994 1.001 1.012 1.024 The table above shows results obtained from an oedometer test on a specimen of saturated clay. A layer of this clay 2.5 m thick lies below a 10 m depth of sand, the water table being at the surface. The saturated weight for both soils is 19 kN/m³. A 10-m depth of fill of unit weight of 21 kN/m³ is placed on the sand over an extensive area. If the fill was to be removed some time after the completion of consolidation, what heave (mm) would eventually take place due to swelling of the clay? (0 d.p). Use unit weight of water of 9.8 kN/m3. Use log base 10.

Pressure (kN/m²)27 54 107 214 429 214 107 54 Void ratio1.243 1.217 1.144 1.068 0.994 1.001 1.012 1.024 The table above shows results obtained from an oedometer test on a specimen of saturated clay. A layer of this clay 2.5 m thick lies below a 10 m depth of sand, the water table being at the surface. The saturated weight for both soils is 19 kN/m³. A 10-m depth of fill of unit weight of 21 kN/m³ is placed on the sand over an extensive area. If the fill was to be removed some time after the completion of consolidation, what heave (mm) would eventually take place due to swelling of the clay? (0 d.p). Use unit weight of water of 9.8 kN/m3. Use log base 10.

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter11: Compressibility Of Soil

Section: Chapter Questions

Problem 11.15P

See similar textbooks

Similar questions

A series of previous tests has established that the ultimate effective friction angle of a NC clayey soil is 19.2°. If a CD test is now performed on this soil with a cell pressure of 105 kPa, what would be deviator stress at failure? Given: o3 = Kao, where Ka 1-sin o' 1+sin o'
Homeworks 2. The following results were obtained from an oedometer test on a specimen of saturated clay: Pressure (kN/m?) 27 54 107 214 429 214 107 54 Void ratio 1.243 1.217 1.144 1.068 0.994 1.001 1.012 1.024 A layer of this clay 8m thick lies below a 4m depth of sand, the water table being at the surface. The saturated unit weight for both soils is 19kN/m3. A 4m depth of fill of unit weight 21 kN/m3 is placed on the sand over an extensive area. Determine the final settlement due to consolidation of the clay. -1 e -eo 1+e, o'y-o'vo my S = i=l
The height of the sample sand to be tested = 20 cm and the height of the saturated sand = 16 cm. Find the bulking of sand. 1. 20% 2. 55.5% 3. 25% 4. 80%
Question 42 The results of two consolidated-drained test triaxial tests on a clay are given below: Specimen No. Chamber Pressure Deviator Stress 105 220 210 400 1. Determine the angle of internal friction. 2. Determine the cohesion of the clay. 3. Determine the normal stress on the point on the failure plane of the 2nd specimen. Question 1: A. 26.744 O Question 1: B. 26.042 Question 1: C. 27.871 O Question 1: D. 27.486 Question 2: A. 10.737 O Question 2: B. 12.141 Question 2: C. 17.372 Question 2: D. 14.836 Question 3: A. 317.694 O Question 3: B. 232.575 Question 3: C. 230.306 O Question 3: D. 322.194
49. The following data are given for the laboratory sample. o=175 kPa; e = 1.1; +Ao = 300 kPa; e = 0.9 If thickness of the clay specimen is 25 mm, the value of coefficient of volume compressibility is x 10-4 m²/kN A. 3x10-³ m²/kN B. 5x10-6 m²/kN C. 12x10-4 m²/kN D. 7.61×10-4 m²/kN
A sample of dry sand is subjected to a triaxial test . The angle of internal friction is 36° . If the cell pressure is 180 kN/m^2 , at what value of deviator stress will the soil fail ?
Question 3 The results of two consolidated-drained test triaxial tests on a clay are given below: Specimen No. Chamber Pressure Deviator Stress 220 400 105 II 210 1. Determine the angle of internal friction. 2. Determine the cohesion of the clay. 3. Determine the normal stress on the point on the failure plane of the 2"d specimen. O Question 1: A. 26.744 O Question 1: B. 26.042 O Question 1: C. 27.871 O Question 1: D. 27.486 O Question 2: A. 10.737 O Question 2: B. 12.141 O Question 2: C. 17.372 O Question 2: D. 14.836 O Question 3: A. 317.694 O Question 3: B. 232.575 O Question 3: C. 230.306 O Question 3: D. 322.194 O O O O O O O CO
Q1/ specimen of the fine-grained soil, 75 mm in diameter and 20 mm thick was tested in an oedometer in a laboratory. At applying pressure (240 kN/m²), the time with dial gauge readings are: Time (min) 0 Settlement (mm) 0 0.25 1 0.22 0.42 Vertical pressure (kPa) 15 Settlement (mm) 0.1 Void ratio 1.88 4 0.6 30 0.11 1.87 9 0.71 16 0.79 And the void ratio and settlement for each load increment is shown in the table below. 60 0.21 1.85 120 1.13 1.72 100 1.04 36 64 0.91 0.86 240 2.17 1.57 480 3.15 1.43 1- Find Coefficient of consolidation in cm²/s using root time and TV90% = 0.848. 2- Find Preconsolidation pressure (oc) and compression index (Cc). Scanned by TapScanner
3.15 In a site consisting of normally consolidated clean sands, the water table is at 10 ft depth. The average unit weight of the sand above and below the water table is 111.5 lb/ft3 and 125.0 lb/ft3, respectively. At a 25 ft depth, Nso was reported as 26. Determine the following: a. (N160 using Liao and Whitman's (1986) equation for CN [Eq. (3.13)] b. D, using Skempton's (1986) correlation [Eq. (3.28)] c. Friction angle using Schmertmann's (1975) correlation [Eq. (3.30)] d. Modulus of elasticity using Kulhawy and Mayne's (1990) correlation [Eq. (3.32)]
Permeability tests were performed on a soil sample, under different void ratio and different temperatures and the following results were obtained. Test No. 1 2 Void ratio (e) 0.65 1.02 Temperature °℃ 25° 40⁰ Estimate the coefficient of permeability at a temperature of 20°C for a voids ratio of 0.80. Given the following physical properties of water: At 20°C, n = 10.09 × 10+ and p„ = 0.998 g/cm³ At 25°C, n = 8.95 × 104 g sec/cm² and p k(cm/s) 0.4x10 1.9x10-¹ At 40° C, n = 6.54 × 10-¹ g sec/cm² and p $0.997 g/cm³ = = 0.992 g/cm³
A Sample of Clay is isotropically normally consolidated to a cell pressure of 350kPa. The sample was then sheared (standard) in a drained state. Calculate values of q, p', and v at failure if the soil constants were: M=0.88, N=2.88, I-2.76, and 2-0.16
A sample of dry sand is subjected to a triaxial test. The angle of internal friction is 36°. If the cell pressure is 180 kN/m2, at what value of deviator stress will the soil fail? Include fbd.