please answer for part 6 and 7 only Two - pulleys belt drive-system is commonly used in washing machines as shown in Figure.1. Your role in acompany that manufactures washing machine is to analyze the power transmission through the belt drivesystem which operates under uniform angular acceleration in such a manner that ensures the required torqueand power output are optimum. The system under study includes two pulleys and one belt with the followingdesign specifications:The driver pully rotates at angular velocity win = 1700 rpm.The driver pully input torque is Tin = 20 N.m.The driver pully has a diameter of 100 mm.The driven pully has a diameter of 220 mm.The system operates for long period under uniform angular speed,Power transmission operates under no slipping condition.220 mm|Belt100 mmW= 1700 rpmT- 20 NmP.PaDriver pulleyDriven pulleyFigure.I(a) Belt drive system used in washing machineFigure.1(b) Belt drive system used in washing machineYour manger asked you to provide a report showing the following:1. Determine the belt-ratio.2. Determine the input power in watts.3. Derive a relation that relates the input torque with the output torque, find the output torque4. Derive a relation that relates the input angular velocity with the output angular velocity, find the outputrotating velocity in rad/sec.5. Find the efficiency of the system and draw a block diagram to show the input-output power with theestimated efficiency, how do you explain the value you have found?6. Find the power output if the efficiency found to be 70% due to frictions and poor meshing.7. In case there is slipping condition, would the speed be uniform, and briefly explain how this will affectthe energy transfer in the belt and the estimated efficiency value (no more than 20 words)

Answered: Image /qna-images/answer/a7af3c46-03b8-4b77-8c52-d6df8fdad2cc.jpg

Answered: please answer for part 6 and 7 only

Engineering

Mechanical Engineering

please answer for part 6 and 7 only

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

If Gear C and gear A are having the same pitch diameter gear and gear B is twice (larger) the diameter of gear C. If gear C is turning at the speed of 50 RPM, what would be the Rotational speed of Gear B in RPM. (RPM = revolution per minute)
I need these three parts answered (Multiple Choice). If you can not answer all three parts please leave it for another tutor to answer. Thank you. For the two holes identified as datum D, what is the total size tolerance specified for those holes? (Multiple Choice)a. .002'b. .003'c. .004'd. .006' The two holes identified as datum D have a counterbore on one end. What size toleranceis specified for the counterbore diameter? (Multiple Choice)a. .010″ (±.005″; see title block)b. .020″ (±.010″; see title block)c. .030″ (±.015″; see title block) What letter represents the revision status of this print? (Multiple Choice)ABCD
A hole is to be drilled as shown by the circle. Using the part geometry shown below, indicate on the part sketch where locator(s) should be positioned according to the 3-2-1 principle. Use dashed lines to indicate locators on hidden surfaces. Also indicate where clamping force(s) should be applied using arrows. Use the minimum number of clamping forces.
Shaft G-Codes programming process (sumerik)
Required information Sally is making a sine bar, which is used to machine angles on parts (see the given figure). She has a 1.250-inch-thick bar that needs 90° grooves machined into it for precision ground 1.0000-inch diameter cylinders. A sine bar is used by placing different thicknesses under one of the cylinders so that the proper angle is attained. Sally wants the distance between the centers of the cylinders to be D= 5.9 inches. NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. 7 -1.00000 * How deep should she mill the 90° grooves so that the top of the sine block is 2 inches tall? (Round the final answer to four decimal places.) The depth of the mill should be 7071.067 inches.
Pls do stepwise and correct.
17-5B pencil is lighter than 5H pencil. O True O False 8- This figure shows center line. O True OFalse 16- The orthogonal projections of this figure 16-The orthogonal projections of this figure are: O True O False ارسال الاجابة ارسال الاجابة ارسال الاجابة
None
Test-II. Write down all the operations or step by step procedure on how to create the object below. Write down also the name of the machines and the tools that you will use to complete the drawing below. 824 020 015 22 15 35 40 100 NOTE: ALL DIMENSIONS ARE IN MM ALL CHAMFERS ARE 1X 45
Problem-AA: Consider the following system of equations: -123 = 1.5a + 25n 5 = -21a +n Calculate the two unknows.
5 In micrometer, circular scale is found on the thimble. Select one: True False