Part B: Poly-Phase CircuitsA three-phase, 330V, 60HZ source is connected to a balanced, purely resistive, three-phase load. Each resistance is 600. Calculate the phase current at the load, the linecurrent and total real power if:4.a. The load is delta-connectedb. The load is wye-connectedA 15-HP motor operates at full-load from a 600 V, 3-phase, 60 Hz, delta connectedsource. The motor is 75% efficient and its power factor is 0.82 lagging.5.a. Calculate the line and phase currentsb. Draw the circuit identifying one line voltage and line current. Also identify onephase voltage and one phase current on the source.C. What is the power generated by one phase of the delta connected source?

Part B: Poly-Phase Circuits 1. A three-phase, 330V, 60HZ source is connected to a balanced, purely resistive, three- phase load. Each resistance is 600. Calculate the phase current at the load, the line current and total real power if: a. The load is delta-connected b. The load is wye-connected 5. A 15-HP motor operates at full-load from a 600 V, 3-phase, 60 Hz, delta connected

Part B: Poly-Phase Circuits 1. A three-phase, 330V, 60HZ source is connected to a balanced, purely resistive, three- phase load. Each resistance is 600. Calculate the phase current at the load, the line current and total real power if: a. The load is delta-connected b. The load is wye-connected 5. A 15-HP motor operates at full-load from a 600 V, 3-phase, 60 Hz, delta connected

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.16P: A single-phase, 120V(rms),60Hz source supplies power to a series R-L circuit consisting of R=10 and...

See similar textbooks

Similar questions

The dc armature resistance of delta-connected alternator measured across its two terminal is 0.8 ohm. The effective resistance per phase is?
A single phase 120V AC sourc controls power to a resistve load 20N using integral cycle control. a) Find the output power for both output voltage waveforms shown below. b) The voltage and the current ratings of the switch. c) The duty cycle and the value of TON to produce 0.63KW power. d) The power factor for part (c). Awww TON -TON
Alternator A (100 kVA, 3-f, 240 V, 60 Hz, 1800 rpm) is operating in parallel with alternator B (125 kVA, 3-f, 240 V, 60 Hz, 1800 rpm). The load of alternator A is 70 kW at 85% pf leading and the load of alternator B is 85 kW at 75% pf leading. Determine the pf of load.
A three-phase star-connected alternator delivers at rated load a current I = 200 A under a voltage of 5 kV-50 Hz (between phases). The load is inductive of power factor equal to 0.87, the resistance of each stator winding is 0.292 and the speed of the rotor is n = 750 r.p.m. The sum of the constants losses and the stator Joule's losses and the rotor Joule's losses is 55 kW. The no load test, at rated frequency, gave: E-4200 V (between phases) for an excitation current lexc = 40 A. The short-circuit test, for an excitation current lexc = 40 A, gave a short-circuit current in the stator windings Ise =2.5 kA. 1- Calculate the numbers of poles of the alternator. 2- Calculate the synchronous reactance (X). 3- Calculate the electromotive force of the alternator (E) between phases for the same excitation current. 4- Calculate the power absorbed by the alternator (Pa).
8 = 0 Q1: What does happen if we change two currents? Q2: What does happen if we have a three-phase four poles machine? a Q3: What does happen if we have a two-phase two poles machine? Q4: What does happen if we apply a capacitance in phase b and then use same voltage for both phase. Dr. Ali K....p. . --
If you have 3-phase power and you need to step down (or up) in 3-phase voltage, how many single-phase transformers are needed? Explain.
e = 0 Q1: What does happen if we change two currents? a. Q2: What does happen if we have a three-phase four poles machine? Q3: What does happen if we have a two-phase two poles machine? e = 0 Q4: What does happen if we apply a capacitance in phase b and then use same voltage for both phase. Dr. Ali Ki. pw --
In the circuit in Figure 2, the capacitor connected to the a-b terminals of the transformer anda circuit consisting of resistance is defined as a load circuit. a)Find the average power spent by the load circuit? b) How much of the average power calculated in a) by the resistance in the load circuit and how muchspent by the capacitor? Comment on the results obtained?
Two identical three – phase Y – connected alternator A and B share equally a load of 10MW at 33kV and 80% lagging pf. The synchronous reactance of each machine is 4 ohms per phase and thew armature resistance is negligible. Alternator A has its filed excitation adjusted to carry 125 A lagging current, what is the current supplied by alternator B? a. 96 A b. 97 A b. 98 A d. 95 A
Q5/B: Explain delta-star connection of 3 ph transformers. What its advantages and disadvantages?
1. A3-phase, star-connected alternator is rated at 15000 kVA, 11 kV. The armature resistance is I-5 S/phase and synchronous reactance is 300/phase. To what value will the terminal voltage rise when full-load at p.f. 0-8 lagging is switched off? [13970 V]
The maximum efficiency of 10Kw D.C generator is 98% and occurs at 80% of full load. Find the total copper losses at rated load