Water flows through an open channel of hydraulic diameter 2.30 m, whose wetted perimeter is 7.00 m.The slope is 0.0130, and the Chézy coefficient is 5.00 m0.5 s-1.(a) Calculate the hydraulic radius. Give your answer in m, to 3 significant figures. (2 mark)Hydraulic radius:(b) Calculate the velocity of the water flow. Give your answer in ms1, to 3 significant figures. (4 marks)Flow velocity:m s-1(c) Calculate the rate of discharge of the flowing water. Give your answer in cubic metres per second(m³ s-1), to 3 significant figures. (4 marks)Rate of discharge:m3 s-1

ows through an open channel of hydraulic diameter 2.30 m, whose wetted perimeter is 7.00 m. pe is 0.0130, and the Chézy coefficient is 5.00 mo.5 s-1. ulate the hydraulic radius. Give your answer in m, to 3 significant figures. (2 mark) c radius: m ulate the velocity of the water flow. Give your answer in m s-1, to 3 significant figures. (4 marks)

ows through an open channel of hydraulic diameter 2.30 m, whose wetted perimeter is 7.00 m. pe is 0.0130, and the Chézy coefficient is 5.00 mo.5 s-1. ulate the hydraulic radius. Give your answer in m, to 3 significant figures. (2 mark) c radius: m ulate the velocity of the water flow. Give your answer in m s-1, to 3 significant figures. (4 marks)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An irrigation channel is to carry a discharge of 14 cumec with a velocity of 0.9 m/s and bed slope of 1 in 2500. The side slopes are 1 to 1. Find the depth and bottom width. The values of Chezy" C for this channel for different values of hydraulic radius R are as tabulated below. Hydraulic radius R 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 Chezy's C 34 35 37 38 39 40 41 41
CCB 343 –HYDRAULICS Tutorial Questions, February 2021 1. A sluice gate is used to control and measure the discharge in an open channel. When the upstream and downstream water depths are 1.0 m and 0.2 m respectively, calculate the discharge in the channel [0.81 m'/s/m width] 2. A rectangular concrete-lined channel of width 2.5 m and depth 0.5 m has a slope of 1 in Try calculating the [0.94m/s]. 2000. If the Manning's n value is 0.015, calculate the discharge. discharge using the Chezy equation with C = 70. 3. A hydraulic jump is to be formed in a channel carrying a discharge of 0.8 m/s/m width of channel with a depth of flow of 0.25 m. Calculate the depth required downstream to create the jump. [0.61 m] 4. A river is 30 m wide and has a rectangular shape. At a bridge location the flow width is restricted to 25 m by the piers of the bridge and the river bed is approximately horizontal. Describe the flow which obtains underneath the bridge with minimum upstream depth when a flood of 450…
For the conduction of the water there is a height difference of 38 m. The results obtained from the hydraulic calculation for three different diameters are shown in the following table Diameter, in. Total head loss, mca 8 56.5 12 37.2 16 29.1 What will be the available driving load? TRANSLATED FROM Para la conducción del agua se cuenta con un desnivel de cotas de 38 m. Los resultados obtenidos del cálculo hidráulico para tres diámetros diferentes son mostrados en la siguiente tabla: Diámetro, plgs. Pérdida de carga total, mca 8 56.5 12 37.2 16 29.1 ¿Cuál será la carga de conducción disponible?
2. Four reservoirs connection is shown below. Determine the discharges in each pipe using Manning's Equation withn = 0.012. Draw the final hydraulic gradient line (HGL). Diameter of pipe (m) Length of pipe (m) 1500 800 Pipe AX 0.30 BX 0.25 XY CY 400 0.30 500 0.20 DY 1600 0.20 WS ELEV. = 300 m wS ELEV. = 150 m WS ELEV. = 100 m ELEV. = 75 m WS D. Y
1) The equation for finding the water head in an open channel flow is given below. is given. In this equation, the channel width (B=8 units) and the flow rate of the water in the channel (Q=5 units) Since the height of the water in the channel is estimated to be between x1-0 and x2=2 units, What is the actual height (H) of the water in the channel? (You can make your transactions less than 0.05% of the approximate error.) continue until it is lower than and take six digits after the comma) 0.471405 x ( BH)5/% f(H) = %3D (B + 2 x H)2/3
Cross section of a wadi at a catchment outlet is shown in the given figure. It is required to obtain variation of wadi-flow rates (hydrograph) during rainfall events. If you were assigned to install a wadi-gage station there, clearly explain the measurements need to be taken and procedure to be followed to develop the rating curve.
Water áows in a rectangular channel of width, w. In some cases, the water may suddenly increase in elevation as shown in the figure (from h1 to h2) through a highly disturbed region called a hydraulic jump. Assume the velocity is uniform at stations 1 and 2, and assume the pressures are distributed hydrostatically. Using the Bernoulli equation and whatever other necessary equation(s), finnd the equation (cubic) for the downstream depth, h2, in terms of h1, V1, and g.
A small stream has a trapezoidal cross- section with base width of 12 m and side slope 2 horizontal: 1 vertical in a reach 8 km. During the high water levels record at the ends of the reach are as follows Section elevation of bed (m) water surface elevation (m) remarks Upstream 100.20 102.70 Manning's n=0.030 Downstream 98.60 101.30 Estimate the discharge in the stream.
Water flows over a spillway of a dam. At the bottom of the spillway, water flows into a rectangular concrete-finished channel (width - 50 ft) with a slope of 0.005. Let n-0.0206. 2.5 ft d, - 2.9 ft a) Calculate the velocity in the channel at the section where the depth is 2.9 ft. Use Manning's equation. (15) b) Determine Froude number at the section where the depth is 2.9 ft and classify the flow. (15) c) Classify the flow where the depth is 2.5 ft and prove your classification. (15) d) What do you expect the flow to be at depth d2 (just an educated guess)? (5)
1: 1,000 5- 由2 田3 4- Depth to Groundwater Well 3- Well ID Y Elevation (m bgs) (m bgs) 2- MW-1 MW-2 105 103 109 25 28 9. 1-2X> 田1 MW-3 13 0 1 4 6 7 8. 6. 10 11 12 13 14 15 X 6 cm Calculate the hydraulic gradient? (Answer should be a number, e.g. 0.280 or 2.80) 55 539 2. 3- 2.
Find the value of hydraulic radius Wetted area=50 m2 Wetted perimeter=25 m
b) The trapezoidal channel of Figure 6 is made of brick work and slopes at 1:500. Using Manning equation, Determine the flow rate if the normal depth is 80 cm. 30° 30° 2 m Figure 6 Trapezoidal channel