|H.W.(10): A balanced three-phase source supplies power to three loads. The loads are Load 1: 24 kVA at 0.6 pf lagging University of Diyala Engineering College Electronic Department Electrical Circuits 2nd Class Assist. Prof: Wisam N. AL-Obaidi Year (2020-2021) Load 2: 10 kW at 0.75 pf lagging Load 3: unknown If the line voltage at the load is 208 V rms, the magnitude of the total complex power is 35.52 kVA, and the combined power factor at the load is 0.88 lagging, find the unknown load. (Answer: S= 13.094-58 · 39° KVAI

|H.W.(10): A balanced three-phase source supplies power to three loads. The loads are Load 1: 24 kVA at 0.6 pf lagging University of Diyala Engineering College Electronic Department Electrical Circuits 2nd Class Assist. Prof: Wisam N. AL-Obaidi Year (2020-2021) Load 2: 10 kW at 0.75 pf lagging Load 3: unknown If the line voltage at the load is 208 V rms, the magnitude of the total complex power is 35.52 kVA, and the combined power factor at the load is 0.88 lagging, find the unknown load. (Answer: S= 13.094-58 · 39° KVAI

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.19P: Consider a single-phase load with an applied voltage v(t)=150cos(t+10)volts and load current...

See similar textbooks

Related questions

Q: List the minimum trade size Type EMT for each of the following applications. (Objective 12-1)…

A: As per Bartleby expert policy only first individual question is to be answered. So, answering only…

Q: * Problems of using standard ICs are amount of circuit board space, a great deal of time and cost in…

A: Given: problems of using standard ICs

Q: 1. A feeder is made up of three conductors (500 MCM, copper, 75°C rated) that are placed in a…

A: “Since you have asked multiple questions, we will solve the first question for you. If youwant any…

Q: 1. What is the proper size copper grounding electrode conductor for a 100-ampere service that…

A: Given-Rating of service conductor=100 ASize of phase conductor= 3/0 AWG

Q: Quèstion 9 An OR gate can be replaced by two AND gates and one NOT gate connected adequately. True…

A: We need to implement OR gate by using of not gate , AND gate .

Q: When using an oscilloscope for testing engine management systems, what is an attenuator used for? In…

A: We need to tell about attenuator in oscilloscope.

Q: 2. A power transmission line is made of copper 1.80cm in diameter. Find the resistance of one mile…

Q: The filament of incandescent lamp is usually made of:

Question

i need the answer quickly

H.W.(10): A balanced three-phase source supplies power to three loads. The loads are
Load 1: 24 kVA at 0.6 pf lagging
University of Diyala
Engineering College
Electronic Department
Electrical Circuits
2nd Class
Assist. Prof.: Wisam N. AL-Obaidi
Year (2020-2021)
Load 2: 10 kW at 0.75 pf lagging
Load 3: unknown
If the line voltage at the load is 208 V rms, the magnitude of the total complex power is
35.52 kVA, and the combined power factor at the load is 0.88 lagging, find the unknown
load.
[Answer: S3 = 13.092-58 · 39º kVA]
%3D

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

In a balanced system, the phasor sum of the line-to-line voltages and the phasor sum of the line-to-neutral voltages are always equal to zero. (a) False (b) True
A single-phase source has a terminal voltage V=1200volts and a currentI=1530, which leaves the positive terminal of the source. Determine the real and reactive power and state whether the source is delivering or absorbing each.
Clear and correct or dislike
There is an installation with two identical three-phase motors, 50 HP each and a power factor of 0.9 behind. When connecting a pure reactive element in parallel, the reactive power at the installation input is 50 kVARS, with a lagging power factor. We can say that: a) A capacitor bank was connected and the pf improved. b) A bank of inductors was connected and the pf improved. c) A capacitor bank was connected and the pf deteriorated. d) A bank of inductors was connected and the pf deteriorated. e) None of the above.
An 11 kV generating station has four identical 3-phase alternatorsGl, G2, G3 and G4 each of L0 MVA capacity and l2%o reaclarce.There are two section of bus-bar P and Q, linked by a reactor X ratedat 10 MVA with 24o/oreactance. From section Q load is taken througha 6 MVA, i 1kV/66kV step-up transformer (T1) having a reactance of37o. Determine the fault current if a three-phase short-circuit occursnear the high voltage terminal of the transformer (F) as shown inFigure.Assume prefault voltages to be 1 pu and prefault currents to be zero
A star connected three phase alternator supplies power to a delta connected resistive load. The alternator has a line voltage of 480V. Each resistor of delta load has 8 ohm of resistance. Find the following values. Line voltage of the load (VL(load)) Phase voltage of the load (VP(load)) Phase current of the load (IP(load)) Line current delivered by the alternator (IL(alt)) Phase current of the alternator (IP(Alt)) Phase voltage of the alternator (VP(Alt)) True power
To improve the load power factor, a Delta-Connected capacitor bank is connected on the low voltage side of the transformer, through A 66/11 kV transformer.The capacitor bank has a rated voltage of 11 KV. Determine the capacitance per phase required to improve the power factor from 0.8 lagging to 0.95 lagging. Power rated (S) =150MVA.
Desian aproblem for wye delta transform adions Determinc the eauivalend resistance between the terminals A andA B.
There is an installation with two equal triphasic loads of 300 kVA each and a power factor of 0.9 lagging. When connecting a pure reactive element in parallel, the reactive power at the entrance of the installation is 150 kVARS, with a lagging power factor. We can say that: a) A bank of reactors was connected and the fp deteriorated. b) A capacitor bank was connected and the pf deteriorated. c) A bank of reactors was connected and the fp improved. d) A capacitor bank was connected and the pf improved. e) None of the above
low voltage systems In the reverse phase, a 1000 kw powerful load under 0.5 power factor is fed from a 5 kv source.A capacitor is connected in parallel with the load to increase the power factor to 0.8. a-) Find the required capacitor power. b-) Compare the apparent power before and after compensation.
A SINGLE-PHASE 230 AC, 60 HZ POWER SUPPLY FEEDS A 2400 WATTS AIR CONDITIONING SYSTEM, WITH A POWER FACTOR OF 0.5 IN LAGGING. IN PARALLEL WITH THE AIR CONDITIONING SYSTEM IS CONNECTED ANOTHER LOAD FORMED BY A 20 OHMS RESISTOR IN SERIES WITH A 40 mH COIL. DETERMINE THE TOTAL POWER TRIANGLEA) THE VALUE OF THE REAL POWER IS:B) THE REACTIVE POWER VALUE IS:C) THE VALUE OF THE APPARENT POWER IS: C) THE VALUE OF THE APPARENT POWER IS: CALCULATE ALSO THE VALUE OF THE CAPACITOR TO BE CONNECTED IN PARALLEL WITH THE SOURCE TO CORRECT THE TOTAL POWER FACTOR TO 0.96. EXPRESS YOUR RESULT IN MICROFARADSD) THE VALUE OF THE CAPACITOR IS:
2. Two transformes A and B of ratings 5uokVA and 25okVA. Supplying a load kVA of 750 ato.8Pf lagging. open circunt valtajes are 400V and 410v respectively. Trusfarmn A has 1/ nsistance and 5/ ractance and traugformer B hay 1.$, mesistona and 41 reactance. Find (^) Crossacarent in the seandaries on no.load.ib) the load shared by euch transfarmer Their are