On the basis of the first law fill in the blank spaces in the following table of imaginary heatengine cycles. On the basis of the second law classify each cycle as reversible, irreversible, orimpossible.Cycle TemperatureRate of Heat FlowRate of EfficiencyworkSourceSinkSupply RejectionОutput...kW327°C27°C 420 kJ/s230 kJ/s(a)(b)(c)(d)... kW26 kW1 kW1000°C 100°C ...kJ/min 4.2 MJ/min65%...kJ/s2500kcal/h750 K 300 K...kJ/s65%700 K300 K..kcal/h

Variables used: Source temperature, TH Sink temperature, TC Heat supplied, QH Heat rejected, QR…

On the basis of the first law fill in the blank spaces in the following table of imaginary heat engine cycles. On the basis of the second law classify each cycle as reversible, irreversible, or impossible. Rate of Heat Flow Rate of Efficiency work Оutput Cycle Temperature Source Sink Supply Rejection (а) (b) (c) (d) 327°C 27°C 420 kJ/s 230 kJ/s ..kW 1000°C 100°C ...kJ/min 4.2 MJ/min ... kW 65% 750 K 300 K ...kJ/s ...kJ/s 26 kW 65% 700 K 300 K 2500 ...kcal/h 1 kW kcal/h

On the basis of the first law fill in the blank spaces in the following table of imaginary heat engine cycles. On the basis of the second law classify each cycle as reversible, irreversible, or impossible. Rate of Heat Flow Rate of Efficiency work Оutput Cycle Temperature Source Sink Supply Rejection (а) (b) (c) (d) 327°C 27°C 420 kJ/s 230 kJ/s ..kW 1000°C 100°C ...kJ/min 4.2 MJ/min ... kW 65% 750 K 300 K ...kJ/s ...kJ/s 26 kW 65% 700 K 300 K 2500 ...kcal/h 1 kW kcal/h

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Air undergoes a Carnot cycle inside a piston-cylinder between thermal reservoirs at 1200K and 400K. During heat addition, the volume triples. what is the overall cycle efficiency? Group of answer choices 57.45% 67.66% 66.67% 65.65%
ii. A heat engine produces work equivalent to 90 kW with an efficiency of 30 percent. The heat transfer rate to and from the working fluid.
During one cycle the working fluid in an engine engages in two work interactions: 15 kJ to the fluid and 44 kJ from the fluid, and three heat interactions, two of which are known: 75 kJ to the fluid and 40 kJ from the fluid. What is the magnitude and direction of the work? What is the magnitude and direction of the third heat transfer? State the formula we used. Solutions/answer must be accurate.
2.5 thermodynamics
The following results were obtained during a two cylinder, four stroke cycle, oil engine over a period of one hour: Cylinder diameter,108mm Piston stroke,135mm Speed,16•5rev/s Brake torque,90Nm Fuel consumption,2•5kg Calorific value of fuel,45500kg/kg Mechanical efficiency,82% The exhaust gas calorimeter and raised the temperature of 215kg of water from 15°c to 61°c. Determine a) the brake thermal efficiency b) the percentage of the energy supplied by the fuel which is carried away by the cooling water, friction and radiation c) the indicated mean effective pressure d) the indicated specific fuel consumption
Hey! This is open space, remember to check your document properties and give all of your images alt text! power cycle receives QH by heat transfer from a hot reservoir at TH = 1200 K and rejects energy Qc by heat transfer to a cold reservoir at Tc = 400 K. For each of the following cases, determine whether the cycle operates reversibly, operates irreversibly, or is impossible. a. QH = 900 kJ, Wcycle = 450 kJ b. QH = 900 kJ, QC = 300 kJ c. Wcycle = 600 kJ, QC = 400 kJ d. n = 75%
Q2/ A power cycle operating between two reservoirs receives energy Qi by heat transfer from a hot reservoir at T 1000K and rejects energy Q2 by heat transfer to a cold reservoir at Tz-200K For each of the following cases, determine whether the cycle operates reversibly, irreversibly, or is impossible. (a) QI = 500KJ, W 350KJ (b) Q1 = 1000KJ, Q2 200KJ (c) W= 800KJ, Q2 = 500KJ (d) 7 = 95 % %3D %3D
Rankine cycle/ engine (Thermodynamics) Show complete and step by step solution and the diagram. Answer as soon as possible.
A reversible refrigeration cycle operates between cold and hot reservoirs at temperatures Tc and TH, respectively. (a) If the coefficient of performance is 10 and Tc- -40°F, determine TH, in °F. (b) If Tc- -30°C and TH -30°C, determine the coefficient of performance. (c) If Qc - 500 Btu, QH-600 Btu, and Tc -20°F, determine TH, in °F. (d) If Tc-30°F and TH-100°F, determine the coefficient of performance. (e) If the coefficient of performance is 8.9 and Te--5°C, find TH, in °C.
At steady state, a power cycle develops a net power output of 20kW while receiving energy by heat transfer at a rate of 20kJ per cycle of operation from a source at a temperature T. The cycle rejects energy by heat transfer to cooling water at a lower temperature of 540 K. If there are 190 (engine thermodynamic) cycles per minute, what is the minimum theoretical value for T, in K?Note: mm is the last
The net work produced by a Gas Turbine Power plant is 85 BTU. What is the efficiency of the said plant, if the Heat supplied is 22% more of that net work? A 79.85% B 81.97% (c) 92.87% 98.32%
2. An internally reversible heat engine operates between intake and heat release temperatures between 627 and 27 °C. Part of the work generated by the heat engine is used to move an internally reversible refrigeration machine that works between temperatures of 27 and -23 °C. The heat supplied to the engine is 2100 kJ and the net work output (the work of the engine minus that consumed by the refrigerating machine) is 500 kJ. Determine a) The heat transferred to the refrigerating machine at -23°c b) The net heat transferred at 27 °C