Oil (density = 842 kg/m³ and kinematic viscosity = 6.2e - 4 m²/s) is being discharged by a 66 mm diameter, 3 m long horizontal pipe from a storage tank open to atmosphere. The height of the liquid above the centre of pipe is 1 m. Disregarding the minor losses, determine (to 4 decimal places): a) the volumetric flow rate of the oil through the pipe m³/s b) the corresponding Re number.

1)

Q1: In a venturemeter used for measuring the flow ofoil (-0.85) through a horizontal pipeline, the pipe diameter is 2.4 times the diameter at the throat. Connections are made from the entrance to the meter and the throat to a vertical L tube containing mercury If the difference level between the fluids in the U - tube arms is (x +) in em, where S.N. is student serial number. Neglect friction in the pipe. Find an expression in terms of x for the velocity of the oil in the pipe.

Q1) By using dimensional analysis concept, express the wall shear stress for the pipe flow which is depending likely on the distance from the beginning of the pipe, pipe diameter, pipe wall roughness, fluid velocity, density and viscosity?

Pls answer in half an hour I'll give good rating thanks  A Find the maximum height of the jet, Hj (in metres) b) Find the velocity at which the jet leaves the pipe (in m/s)

a) Develop an equation for the head (in ft) developed by the pump described by the chartas a function of flow rate (in gpm) when the pump uses a 9 ¾” impeller. b) Develop an equation for the pump efficiency as a function of flow rate (gpm) when the pump uses a 9 ¾” impeller.

The rate of flow of water through a horizontal pipe is 200+last two digits of your id lit/s. Thearea of the pipe suddenly enlarges from 300 cm2to 1200 cm2. The pressure intensity in thesmaller pipe is 10+last digit of your id N/cm2. Determine:a) Loss of head due to sudden enlargementb) Pressure intensity in the larger pipec) Power lost due to enlargement    Explain with clear writing and units and diagram Also if you use tables and equation mention it with explanation

Please explain all intermediate steps. Thanks you