o (psi) - o = 9.5(10³)e!3 e (in. /in.)

Q: Let's consider a rod subjected to the shown axial forces. If we consider a linear elastic behavior,…

A:

Q: A bar BD is held in a horizontal position when there is no load by the steel wire AB. When a weight…

A: The cross sectional area of wire is The modulus of elasticity is The yield strength is The…

Q: Arigid steel bar issupported by three rods, as shown. There isno strain in the rods before the load…

A:

Q: A cylindrical bar of steel 10.4 mm (0.4094 in.) in diameter is to be deformed elastically by…

A:

Q: The rigid bar is supported by an 8-cm-long, 8-mm-diameter aluminum wire A and a 10-cm-long, 2-mm-…

A:

Q: Nylon strips are fused to glass plates. When moderately heated the nylon will become soft while the…

A: Answer: The average shear strain in nylon due to load P is 0.1974 rad ( 11.3099°).

Q: Two round rods, one of steel, the other of brass, are joined end to end. Each rod is 0.5 m long and…

A: Given that, Esteel=20×1010PaEbrass=10×1010Pa

Q: Question 53 What is the elongation of the aluminum bar with a dimension of 25 mm by 25 mm and length…

A:

Q: A rod 31 cm long and 0.33 cm in diameter is subjected to a load of 4,500 N and its diameter is…

A:

Q: A sheet of plywood consists of three equally thick sheets, the upper and lower sheets having their…

A: Given   Tensile modulus, E1 = 10 GPa                              E2 = 0.4 GPa Find   Tensile…

Q: The cylindrical rod BC, diameter 3.6 mm made of steel supports the AD bar with a distribution of…

A: Given data dBC=3.6mm E=200 GPa

Q: A bar of chocolate has length, thickness, and width measurements of 15mm each. The load applied to…

A:

Q: Question Three: Derive expressions that shows 1) Relationship between modulus of elasticity and…

A:

Q: steel rod is subjected to a gradually applied load (F) which gave a rise to a maximum stress of 200…

A:

Q: If a force of 300 kN is applied to the top of a circular steel bar with a diameter of 150mm and a…

A: Given: Now, Tensile force:

Q: Two solid cylindrical rods support a load of P = 39 kN, as shown. Rod (1) has a diameter of 16 mm…

A:

Q: A copper rod of 50mm diameter is surrounded by a steel tube of 100mm external diameter, the ends…

A:

Q: A bar of thickness 15mm and having a rectangular cross-section carries a load of 120kN. Determine…

A:

Q: the contraction of the bar

A: Given ; A steel bar of;     ⇒   40mm2×40mm2cross-section is subjected to an axial compressive load,…

Q: A metallic rod made of steel as shown below is used as support for a signage with length equal to…

A:

Q: At the proportional limit, a 20-mm-thick x 75-mm-wide bar elongates 7.1 mm under an axial load of…

A: Given Data- Area A=20mm*75mm Change in length =7.1mm Load P=465KN L=1.6m We have to find Modulus of…

Q: Determine the elongation of an aluminium hollow cylinder of an inner diameter of 1.27 cm & the…

A: Area of cross section can be determined as

Q: The cylindrical bar composed of two parts (AB and BC) is fixed at ends A and C. The two parts are…

A:

Q: The normal stress in a piece of structural member is 300 MPa. If the modulus of rigidity G is 85…

A: Problem is based on strength of materials and can be solved as:

Q: A bar has a length of 200 mm and cross-sectional area of 7500 mm2. Determine the modulus of…

A: Given F=50kN=50 x 10^3N l=200 mm A=7500 mm^2 E=0.075 mm

Q: A 3-mm thick plastic hollow 2-1 cylinder (E-3 GPa) and a rigid circular plate are used to support a…

A:

Q: A solid plastic rod has a diameter of d = 38 mm and a length of L = 700 mm. An axial load of P = 21…

A:

Q: A compressive load of 2.4 kN acts on a circular bar of 200 sq. mm area and 20 mm high. It…

A: Load P=2.4 kNArea A=200 mm2Length/height L=20 mmCompression To Find-The value of Young's modulus of…

Q: You are given a square rod of 6061-T6 aluminum (cross-section = 4mm X 4mm, length = 2.3m).  The…

A:

Q: A solid plastic rod has a diameter of d = 44 mm and a length of L = 700 mm. An axial load of P = 22…

A:

Q: A rod is subjected to a uni-axial load within linear elastic limit. When the change in the stress is…

A: This question is a very simple and related with the concept of Young's modulus of elasticity and…

Q: A copper rod with a diameter of 19 mm, modulus of 110 GPa, and a Poisson’s ratio of 0.35 is…

A:

Q: A 0.1-in wire that is 10-in long and supports a 100-lb weight stretches a total of 0.1-in. What is…

A: Given question belongs to the subject Strength of materials and can be solved using the concepts of…

Q: load of 200 KN. If the length of the bar is 2 m and E = 200 GPa. What will be the elongation of the…

A:

Q: A tensile load of 20 kN is applied on a wire made of a copper alloy having an elastic modulus of 120…

A:

Q: A cylindrical structural element is made of steel. The element must withstand an axial load of 160…

A: Given: The value of the axial loading is, P=160 kN. Thye value of yield stress is, σy=340 MPa. The…

Q: A bar having a length of 125 mm and cross-sectional area of 467.5 mm² is subjected to an axial force…

A:

Axial Load

When a bar of the uniform cross-section is acted by a load, such that the load acts along the longitudinal axis of the bar, such kinds of loadings are known as axial loadings. In general terms, a load is an external force acting on a component. An axial load acts perpendicular to the geometric cross-section of the component. Based on the direction of the application of the load, an axial load can be tensile or compressive. The analysis of bodies under the action of axial loads is generally studied under the branch of mechanics, known as statics.