Question 3: Find the velocity and acceleration of the piston for the crank slider mechanism shown in figure 2. The crank AB rotates anti-clockwise at 300 rad/min with constant velocity. Point A is fixed. CH 77777777 85 mm 25 mm

The dimension and configuration of a four-bar mechanism is shown below. The crank P1A has an angular velocity of 10 rad/s and angular acceleration of 30 rad/s both clockwise. Determine the angular velocity of P2B. 00 mm 300 mm 8 rad/s (anticlockwise) 6.1 rad/s (clockwise) 1.9 rad/s (clockwise) 9 rad/s (clockwise)

The wheel rolls on its hub without slipping on the horizontal surface as shown in (Figure 1) The velocity of the center of the wheel is 2.6 ft/s to the right Figure "1 4 05 1 of 1 Part B Determine the direction of the velocity of point A at the instant shown Express your answer in degrees to three significant figures. Submit ▼ Part C 15] ΑΣΦΗ vec Request Answer ? Determine the magnitude of the velocity of point B at the instant shown measured clockwise from the positive axis S

For the problem related to Fundamental.4, a sketch of the considered system showing and naming (or numbering) every part of the system considered, the respective velocity and acceleration of each, and the frame of reference considered is mandatory. Its absence will automatically make the problem false. At the instant observed below 0 =14°, 4°. Z A 3 ft WAB 2 ft C B What must be the angular velocity of the link AB, WAB in rad.s¹ if the linear velocity of C is 7 ft.s¹ -1 --1