Let the two host X and Y connected via a packet switch with 107 bits per second links. Switch is placed at 50 km from X. X and Y are located at 100 Kilometer apart also the propagation speed along the link is 2 × 108 m/s. The switch begins forwarding a packet after 0.1 milliseconds it receives the packet. If 1000 bytes of File are needed to be transmitted and each packet size is 500 bytes, the time elapsed between the transmission of the first bit of data and the reception of the last bit of the data in millisecond is

Let the two host X and Y connected via a packet switch with 107 bits per second links. Switch is placed at 50 km from X. X and Y are located at 100 Kilometer apart also the propagation speed along the link is 2 × 108 m/s. The switch begins forwarding a packet after 0.1 milliseconds it receives the packet. If 1000 bytes of File are needed to be transmitted and each packet size is 500 bytes, the time elapsed between the transmission of the first bit of data and the reception of the last bit of the data in millisecond is

Operations Research : Applications and Algorithms

4th Edition

ISBN:9780534380588

Author:Wayne L. Winston

Publisher:Wayne L. Winston

Chapter20: Queuing Theory

Section20.10: Exponential Queues In Series And Open Queuing Networks

Problem 8P

See similar textbooks

Similar questions

A packet switch receives a packet and determines the outbound link to which the packet should be forwarded. When the packet arrives, one other packet is halfway done being transmitted on this outbound link and four other packets are waiting to be transmitted. Packets are transmitted in order of arrival. Suppose all packets are 1,200 bytes and the link rate is 2 Mbps. What is the queuing delay for the packet? More generally, what is the queuing delay when all packets have length L, the transmission rate is R, x bits of the currently-being-transmitted packet have been transmitted, and n packets are already in the queue?
Host A is sending data to host Bover a full duplex link. A and B are using the sliding window protocol for flow control. The send and receive window sizes are 5 packets each. Data packets (sent only from A to B) are all 1000 bytes long and the transmission time for such a packet is 50 µs. Acknowledgment packets (sent only from B to A) are very small and require negligible transmission time. The propagation delay over the link is 200 µs. What is the maximum achievable throughput in this communication?
In this problem, we consider sending real-time voice from Host A to Host B over a packet switched network (VoIP). Host A converts analog voice to a digital 64 kbps bit stream on the fly. Host A then groups the bits into 56-byte packets. There is one link between Hosts A and B; its transmission rate is 2 Mbps and its propagation delay is 10 msec. As soon as Host A gathers a packet, it sends it to Host B. As soon as Host B receives an entire packet, it converts the packet's bits to an analog signal. How much time elapses from the time a bit is created (from the original analog signal at Host A) until the bit is decoded (as part of the analog signal at Host B)?
Consider sending real-time data from Host A to Host B over a packet-switched network. Host A takes an 8-bit measurement every millisecond, and Host A collects these into 64-byte packets. There is one link between Hosts A and B; its transmission rate is 5 Mbps, its propagation delay is 2 × 108 meters/sec, and its length is 3 km. As soon as Host A gathers a packet, it sends the packet to Host B. How much time elapses from the time that Host A begins to take the first measurement in a packet until the entire packet reaches Host B?
In this problem, we consider sending real-time voice from Host A to Host B over a packet-switched network (VoIP). Host A converts analog voice to a digital 64 kbps bit stream on the fly. Host A then groups the bits into 56-byte packets and when a packet is formed, it is send to host B. There is one link between Hosts A and B; its transmission rate is 2 Mbps and its propagation delay is 10 msec. What's the elapsed time since when the first bit is formed (from the original analog signal at Host A) until the bit is received at host B?
A sender with window size (W=3) is connected to a selective repeat receiver by a link with bandwidth =106 bytes/second and propagation delay of 0.25 msec. The receiver sends Positive ACK for correctly received packets. For each packet sent, the sender sets a timer with time out value of 5 msec. On receiving an ack for a packet, the timer for that packet is cancelled. If the timer expires, that packet is retransmitted immediately. Assume that the sender sends packets 1, 2, and 3 (at t=0, packet size =1000 Bytes) and packet 2 is lost. NO other packet is lost. Under this scheme , at what time in msec would all the packets been received at the receiver.
Consider a TCP connection betweek two hosts between A and B. The first data byte sent by A is numbered 1. The LastByteRcvd at B is 500. Then, the range of values SendBase at A may take is from to 500
A sender with window size (W=3) is connected to a go back N receiver by a link with bandwidth =106 bytes/second and propagation delay of 0.25 msec. The receiver sends Positive ACK for correctly received in order packets. For each packet sent, the sender sets a timer with time out value of 5 msec. On receiving an ack for that packet, the timer is cancelled. If the timer expires, that packet is retransmitted immediately. Assume that the sender sends packets 1, 2, and 3 (at t=0, packet size =1000 Bytes) and packet 2 is lost. NO other packet is lost. Under this scheme , at what time (in msec) would all the packets been received at the receiver.
PLZ AS FAST AS POSSIBLE I WANT THE SOLUTION OF THIS QUESTION A pipeline protocol is used between a sender and a receiver. The sender wants to send 6 packets with a rate 1packet/1ms. The propagation time is 3 ms for any packet and the time out is 8 ms. The time for processing packet and the transmission time are negligible. Assume that Selective Repeat is used, window size is 3 and the packet with sequence number 2 is lost (start sequence number from 0) a. Fill up the below figure with information about sending packet from sender to receiver and ACK packet in reverse direction. b. Calculate the total time required in c. order the receiver receives the 6 packets correctly. Specify the number of data packets and acknowledgments sent and sequence number of data packets and acknowledgments. Receiver H Sender Ims
Consider two hosts, A and B that are connected by a transmissions link of2.1 Mbps. Assume that packets are of length 2.0 Kb (Kilobits) and the length of the link is 100Km. a. What is the propagation delay from A to B, that is the amount of time from when the first bit of the packet is transmitted at A, until it is received at B? b. What is the transmission time of the packet at A (the time from when the first bit of the packet is sent into the wire and the time at which the last bit is sent into the wire). c. Suppose now that that length of the link is doubled. What is the propagation delay from A to B now and what is the transmission time? d. Now suppose that node C is connected to node B also by a 2 Mbps, 100 Km link. How long does it take from when the first bit is transmitted by A to when the last bit is received at C, assuming B operates in a store-and -forward manner?
Suppose an extension of TCP allows window size much larger than 64 KB. Assume the extended TCP runs over a 100-Mbps link with RTT 100 ms, segment size is 1 KB, and receiving window size is 1 MB. How long does it take to send a 200 KB file?
Computer A is sending a 10 MByte long file to Computer B via packet-switching over two consecutive 100 Mbps links of 2000 km length each.Assume that the signal propagation speed on both links is 2 x 108 m/s.Furthermore, assume that the maximum length of a packet is 1480 bytes and that Computer A fills each packet to the max, if possible. How "long" (in meters) is one bit on link 1?