Komatsu, Ltd. Komatsu Ltd was one of Japan's largest heavy industrial manufacturers.  Komatsu was a large international firm with revenues of ¥989 billion and met some of 131 billion. The company was organized along three major lines of business: Construction equipment, industrial machinery, and electronic-applied products. Construction Equipment Komatsu was the world's second-largest manufacturer of a complete line of construction equipment. The firm's product line contained over 300 models, including bulldozers, hydraulic excavators, wheel loaders, and dump trucks. With a more than 30% share of the domestic excavator market, Komatsu was the largest player in the Japanese market. The Product Development Process and Design for Manufacturability Cost Studies The product development process at Komatsu lasted two years on average. The Product Planning Stage The product planning process, which was last updated in 1981, began with the preparation of a long-range development plan. The Design Stage The objective of the design stage of product development was to prepare the product for prototype production. The design phase consisted of three major steps: first, a conceptual drawing of the product: second, layout drawings for the product and third, detailed parts drawings. During the first step, the first of four design-for-manufacturability studies was conducted. The A study evaluated the feasibility of achieving the target cost and the overall manufacturability of the design . The Trial Production Stage The objective of the trial production stage was to finalize the design of the product Trial production consisted of producing prototypes of each product and was conducted at the plants at which the product was to be manufactured. The completion of trial production allowed the final, or D. study to be carried out . This study examined the ease of production and assembly of the new product and confirmed its quality. If any problems were encountered, a Trial-Manufacture Problem Document was issued. Reducing the Time to Market Players in the highly competitive market for excavators and bulldozers had begun to compete based on the time it took to get new products to market. Part of Komatsu's plan to improve its design for manufacturing was to change its relationship with its suppliers. In 1993, Komatsu manufactured about 30% of its products, designed and subcontracted another 50%, and purchased from outside suppliers the remaining 20%. Target Costing Throughout the product development process, target costs played a critical role in ensuring that the product would be profitable when released for mass production. The preliminary target costs used in the long-range development plan for major subassemblies, such as the engine, power train, and cooling system, were developed from prior experience with similar subassemblies and discussions with production and engineering. These preliminary target costs or target values, were used to help identify when the application of cost reduction techniques was required. Product engineers were expected to identify several design alternatives for each major subassembly of a new product. Two factors were considered: quality and cost. A new design alternative was only adopted if it achieved both the desired levels of quality and cost. Frequently, one of the alternatives proposed produced a higher quality product but at a higher cost. The product engineers then explored ways to manufacture the higher quality alternative at a lower cost. If a cost-effective way to implement the new alternative was identified, then it was adopted; otherwise, the alternative was abandoned or subject to further study for future applications. The process of design analysis in the way the engine and torque converter, transmission, and steering clutch and brakes were positioned in the firm's larger bulldozers. In the old design, these three modules were physically separate. This approach, required 86 hours to mount and dismount these modules during maintenance. The process of functional analysis at Komatsu can be illustrated by the development of the target cost of an excavator cooling system. It began with an analysis of the functions of the cooling system and how they were achieved. The primary function was identified as its cooling capacity; secondary functions included how quickly it started cooling after the engine was first switched on and how stable a temperature it maintained. The determinants of cooling capacity were ranked in the order of importance. The most important determinant of cooling capacity was identified as the surface area of the radiator. The second most important determinant was the size of the fan, followed by the rotation speed of the fan, the volume of water in the system, and the ambient air temperature, The functional analysis began by plotting the cooling capacity versus the radiator surface area for all existing products that used the same type of cooling system. Required: Make a SWOT Analysis of Komatsu

Understanding Business
12th Edition
ISBN:9781259929434
Author:William Nickels
Publisher:William Nickels
Chapter1: Taking Risks And Making Profits Within The Dynamic Business Environment
Section: Chapter Questions
Problem 1CE
icon
Related questions
Question

Komatsu, Ltd.
Komatsu Ltd was one of Japan's largest heavy industrial manufacturers.  Komatsu was a large international firm with revenues of ¥989 billion and met some of 131 billion. The company was organized along three major lines of business: Construction equipment, industrial machinery, and electronic-applied products.

Construction Equipment

Komatsu was the world's second-largest manufacturer of a complete line of construction equipment. The firm's product line contained over 300 models, including bulldozers, hydraulic excavators, wheel loaders, and dump trucks. With a more than 30% share of the domestic excavator market, Komatsu was the largest player in the Japanese market.

The Product Development Process and Design for Manufacturability Cost Studies

The product development process at Komatsu lasted two years on average.

The Product Planning Stage

The product planning process, which was last updated in 1981, began with the preparation of a long-range development plan.

The Design Stage

The objective of the design stage of product development was to prepare the product for prototype production. The design phase consisted of three major steps: first, a conceptual drawing of the product: second, layout drawings for the product and third, detailed parts drawings. During the first step, the first of four design-for-manufacturability studies was conducted. The A study evaluated the feasibility of achieving the target cost and the overall manufacturability of the design .

The Trial Production Stage

The objective of the trial production stage was to finalize the design of the product Trial production consisted of producing prototypes of each product and was conducted at the plants at which the product was to be manufactured. The completion of trial production allowed the final, or D. study to be carried out . This study examined the ease of production and assembly of the new product and confirmed its quality. If any problems were encountered, a Trial-Manufacture Problem Document was issued.

Reducing the Time to Market

Players in the highly competitive market for excavators and bulldozers had begun to compete based on the time it took to get new products to market. Part of Komatsu's plan to improve its design for manufacturing was to change its relationship with its suppliers. In 1993, Komatsu manufactured about 30% of its products, designed and subcontracted another 50%, and purchased from outside suppliers the remaining 20%.

Target Costing

Throughout the product development process, target costs played a critical role in ensuring that the product would be profitable when released for mass production. The preliminary target costs used in the long-range development plan for major subassemblies, such as the engine, power train, and cooling system, were developed from prior experience with similar subassemblies and discussions with production and engineering.
These preliminary target costs or target values, were used to help identify when the application of cost reduction techniques was required.

Product engineers were expected to identify several design alternatives for each major subassembly of a new product. Two factors were considered: quality and cost. A new design alternative was only adopted if it achieved both the desired levels of quality and cost. Frequently, one of the alternatives proposed produced a higher quality product but at a higher cost. The product engineers then explored ways to manufacture the higher quality alternative at a lower cost. If a cost-effective way to implement the new alternative was identified, then it was adopted; otherwise, the alternative was abandoned or subject to further study for future applications.

The process of design analysis in the way the engine and torque converter, transmission, and steering clutch and brakes were positioned in the firm's larger bulldozers. In the old design, these three modules were physically separate. This approach, required 86 hours to mount and dismount these modules during maintenance.

The process of functional analysis at Komatsu can be illustrated by the development of the target cost of an excavator cooling system. It began with an analysis of the functions of the cooling system and how they were achieved. The primary function was identified as its cooling capacity; secondary functions included how quickly it started cooling after the engine was first switched on and how stable a temperature it maintained.

The determinants of cooling capacity were ranked in the order of importance. The most important determinant of cooling capacity was identified as the surface area of the radiator. The second most important determinant was the size of the fan, followed by the rotation speed of the fan, the volume of water in the system, and the ambient air temperature, The functional analysis began by plotting the cooling capacity versus the radiator surface area for all existing products that used the same type of cooling system.

Required:

Make a SWOT Analysis of Komatsu

Expert Solution
trending now

Trending now

This is a popular solution!

steps

Step by step

Solved in 2 steps

Blurred answer
Knowledge Booster
Labour law
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, management and related others by exploring similar questions and additional content below.
Similar questions
  • SEE MORE QUESTIONS
Recommended textbooks for you
Understanding Business
Understanding Business
Management
ISBN:
9781259929434
Author:
William Nickels
Publisher:
McGraw-Hill Education
Management (14th Edition)
Management (14th Edition)
Management
ISBN:
9780134527604
Author:
Stephen P. Robbins, Mary A. Coulter
Publisher:
PEARSON
Spreadsheet Modeling & Decision Analysis: A Pract…
Spreadsheet Modeling & Decision Analysis: A Pract…
Management
ISBN:
9781305947412
Author:
Cliff Ragsdale
Publisher:
Cengage Learning
Management Information Systems: Managing The Digi…
Management Information Systems: Managing The Digi…
Management
ISBN:
9780135191798
Author:
Kenneth C. Laudon, Jane P. Laudon
Publisher:
PEARSON
Business Essentials (12th Edition) (What's New in…
Business Essentials (12th Edition) (What's New in…
Management
ISBN:
9780134728391
Author:
Ronald J. Ebert, Ricky W. Griffin
Publisher:
PEARSON
Fundamentals of Management (10th Edition)
Fundamentals of Management (10th Edition)
Management
ISBN:
9780134237473
Author:
Stephen P. Robbins, Mary A. Coulter, David A. De Cenzo
Publisher:
PEARSON